Vår produktion består av en speltidning, i både digital och tryckt form, som kretsar runt ett community av skribenter och forumiter. Målet var att skapa en oberoende tidning med fokus på åsikter och upplevelser, där majoriteten av det redaktionella materialet var skrivet av läsare. Vårt arbete gick ut på att formge, illustrera och distribuera denna tidning, men även att söka annonser, utforma en webblösning för kommunikation mellan användarna samt bedriva övrig företagsverksamhet (så som externa beställningsjobb inom media) för att ro i land projektet..

This paper is partially a literature study of human error and interruptions and partially an investigation of pilots and Air Traffic Control. The aim of the investigation was to find out where interruptions occur and how to reduce or eliminate them. The objective of this paper was to investigate what type of interruptions pilots and ATC deals with and during which phases they occur. The paper has revealed that private pilots causes more interruptions for ATC personnel than commercial pilots. The cause for this is probably the less experienced private pilot and the fact that Swedish is used before English by private pilots in communication with ATC.

Det senaste året har jag arbeta med analys av digital mediehantering, digital media som ett informationsverktyg samt tekniken bakom det. ?Hur kan man göra saker mer effektivt?, ?är webb-tv något för Försvarsmakten att använda sig av i syfte att göra sitt informationsflöde mer effektivt?, både internt och mot allmänheten. Föreliggande arbete tar upp tekniken bakom dessa områden, jag försöker även förklara hur relativt enkelt det kan vara att integrera dem i en existerande organisation utan att göra dyra omorganisationer. Jag har även inventerat AMF och FM media på deras utrustning, teknik och gjort en lista på vad som är användbart och på vad som bör tas bort inför en omstrukturering. Vidare föreslår jag var en viss utrustning bör lämpligast placeras för att göra mest nytta. Slutligen handlar detta arbete om att skapa en medvetenhet om digital media, och visa exempel på vad man kan göra med denna teknik i en organisation som Försvarsmakten och AMF..

The result from Requirements Engineering is a Requirements Specification. Characteristics of a good Requirements Specification are unambiguity, completeness, verifiability, consistency, modifiability, traceability, correctness and ranked for importance and/or stability.This work defines these quality attributes and answers the questions how to reach these attributes and the diffuculties which exist in this area.This work should be read to get an overwiew of the area Requirements Engineering and Requirements Specification..

RISKfree ? ett system för riskhantering inom programvaruprojektI dagens IT-centrerade värld sker utvecklingen av hårdvara och programvara i en rasande takt. Om ett företag skall ha möjlighet att vara konkurrenskraftigt i denna utvecklingstakt, krävs det snabba och effektiva metoder i utvecklingsprocessen. Dessa krav från omvärlden på nya och mer komplexa produkter och tjänster innebär ofta nya och större risker för ett utvecklingsprojekt; både ekonomiska som tidsmässiga.Analyser av programvaruprojekt som har misslyckats visar att många av deras problem och risker kunde ha undvikits eller åtminstone drastiskt reducerats med hjälp av riskhantering. Oftast är det en optimistisk entusiasm över projektet som överskuggar viktiga varningssignaler om risker och problem enligt B.W.

Grunden för examensarbetet är den tävling om nytt stadsbibliotek i Stockholm som Stockholms stad utlyste 2006. Det nuvarande stadsbiblioteket från 1928, ritat av Erik Gunnar Asplund, är en av Sveriges mest kända byggnader. Uppgiften har varit att rita en tillbyggnad som kan bilda en helhet tillsammans med det nuvarande biblioteket. Det har handlat om att först värdera det som finns idag och sedan tillföra något för framtiden..

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Technology evolves quickly, with innovative ideas growing everywhere. Still, no technology is anywhere near challenging the mouse and keyboard for navigation of your standard computer. This study focuses on comparing the traditional technologies of mouse and keyboard with the new technology of gestures - in this case Leap Motion - in purpose of finding how the usage differs and what the potential users want from the competing technology. The experiment was executed in a controlled environment, with as few external factors as possible. We found that although the test subjects found Leap Motion fun, the test subjects do not want to surf the web with gestures.

Denna rapport behandlar den marknadsinriktade Requirements Engineering (RE) processen. Allt fler företag väljer idag att implementera standardsystem i sina verksamheter. Den situation som ett standardsystem utvecklas i är annorlunda jämfört med den som ett kundspecifikt system utvecklas i. Detta innebär att den traditionella RE-processen inte är anpassad till dessa nya förhållanden.Syftet med denna rapport är därför att utreda vad som kännetecknar en marknadsinriktad RE-process som stödjer kravhanteringsarbetet vid utvecklingen av ett standardsystem. Rapporten avser även att undersöka hur RE tillämpas av marknadsinriktade systemtillverkare i praktiken.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

AbstractIn this study. I have compared four different schools, two preschools and two compulsory schools. My purpose has been to get a view of, to which extent they use technology in their education.I have also compared boys and girls.The result has been achieved with the aid of questionnaires.It shows that the pedagogues in the preschool, think they use technology every day. They use it in their games, experiments, food situations and even when the children are dressing them selves.The pedagogues in the compulsory schools work with technology, without reffering to the actual concept. They use the nature and experiments, to involve the children in technology.One of the schools has a film project.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database. Although Ruby on Rails was completely new to me, I decided to use this framework instead of PHP, which I already have a good knowledge of, because of the benefits Ruby on Rails provide.