This thesis was performed as assignment from Fazer Food Services. The aim was to survey which food additives that were present in the products in the quotation list of one of their suppliers to the Education and Nursing segment. The aim also was to perform a theoretical analysis of these food additives and to make recommendations which food additives are acceptable and which should be excluded from the products in the future. The recommendations are not published in this report, for more information Fazer Food Services can be contacted. Food additives which have already been approved are regarded as safe according to the safety evaluation methods available at the time of approval.

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

Wastewater treatment is increasingly controlled by the Swedish environmental quality objectives, adopted by the Swedish parliament. There is a need for a sewage system that can fulfill stringent requirements concerning the environment, recycling and resource use and hygiene. Additional environmental aspects in recent years are the impact of climate change, new knowledge about the effects of pharmaceuticals in water, the need for improved wastewater treatment and increased recycling of nutrients to agriculture. This report has, from a future scenario of the year 2050, analyzed seven different systems for wastewater treatment and treatment of compostable biowaste from households in Eskilstuna. A future scenario was chosen based on that within a forty year period new challenges may arise which can result in higher demands on sewage treatment than those we see today. Another reason why the future scenario was established is that changes in wastewater treatment systems are slow to establish. The analysis is mainly focused on the economical aspects but environmental aspects such as emissions to receiving waters and potential recycling of plant nutrients has also been evaluated briefly.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

ERP system is the information technology that has had the biggest impact in companies? development and way of working in today?s world. ERP system is divided in several applications with a modular software design that allow people in every department in a company to store and retrieve information accurately and in real-time. This master thesis investigates attitudes toward ERP systems among business organisations and ERP suppliers with the overall purpose of analysing to which extent a new ERP system will bring change in the business process. The purpose of this thesis is to make a survey of attitudes toward ERP systems among business organisations and ERP suppliers.

Allt fler konsumenter väljer att göra ekologiska val, detta på grund av en ökad medvetenhet samt ett intresse för miljön. Bomull är en av de fibrer som används mest i kläder, trots detta så är bomullsproduktionen väldigt påfrestande för miljön. Mycket giftiga kemikalier, konstgödsel samt stora mängder vatten används vid dessa odlingar. Då bomullsodlingar är så pass resurskrävande måste alla klädföretag visa sitt engagemang i denna fråga. Detta kan göras på olika sätt, att välja ekologisk bomull framför konventionell bomull är då ett steg i riktning då den ekologiska bomullen är helt befriad från kemikalier och andra farliga medel.Syftet är att denna rapport ska verka som ett underlag för klädföretag som i dagsläget inte använder sig av ekologisk bomull.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier.

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

Scania Top Team is a competition where the best mechanics in the world are competing against each other. In 2011, the world final was recorded and this material is now used to see which problem solving strategies these top of the line teams are using to solve the realistic problems assembled in front of them. To help them, the mechanics are allowed to use two of Scanias IT-systems: Scania Multi and Scania Diagnose and Programmer 3. This report consists of two parts. The first part is the development of a method to analyze the recorded material.

This thesis has been made on behalf of SCA Skog AB to assess the need of boron in Swedishforest fertilization. Boron has been added to Swedish forest fertilizers since the beginning of the1980s. This makes the fertilizers more expensive and therefore has the necessity of boron inSwedish forest fertilization been raised.The Swedish bedrock generally contains small amounts of boron. The boron in the bedrock istightly bound to the mineral tourmaline and mostly unavailable for plants. This leads to that thecontribution of boron to the soil from weathering is very low besides soils with marinesediments.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..

This thesis was performed as assignment from Fazer Food Services. The aim was to survey which food additives that were present in the products in the quotation list of one of their suppliers to the Education and Nursing segment. The aim also was to perform a theoretical analysis of these food additives and to make recommendations which food additives are acceptable and which should be excluded from the products in the future. The recommendations are not published in this report, for more information Fazer Food Services can be contacted. Food additives which have already been approved are regarded as safe according to the safety evaluation methods available at the time of approval.