This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

Biogas is a renewable fuel that can be extracted from anaerobic digestion of many differentsubstrates, for example biological household waste. An alternative handling of the waste is tomix it with other wastes and incinerate it in a combined heat and power (CHP) plant. Thisstudy uses life cycle assessment to investigate which type of waste handling that is betterfrom an environmental point of view, anaerobic digestion with biogas production orincineration. The results are based on a case study of a biogas production plant owned by thecompany Ragn-Sells in Vänersborg. The alternative is incineration at a CHP plant inGothenburg.

The aim of this study is to find information about what to do when riding arena footings are worn-out. Especially, the surface layer of riding arena footings is very interesting because of its importance of giving grip in every step for the horse, as well as shock ab-sorption. Generally, surface layers are containing several different parts in order to achieve desirable properties. These different parts can consist of organic material or in-organic material (mostly gravel). Gravel and many other materials in the top-layer are environmental friendly, and therefore, easy to get rid of.

Syfte: Att analysera hur dagligvaruhandeln använder sig av Grön Marknadsföring internt och externt för att positionera sig som ett miljövänligt företag på marknaden.Metod: En deskriptiv undersökning med primärdata i form av personliga intervjuer från de tre största aktörerna inom svenska dagligvaruhandeln.Teori: ?Green Marketing Activities at the Three Levels? har används som modell för att ta reda på hur de olika företagen arbetar med Grön Marknadsföring. Modellen är uppdelad i åtta områden och tre nivåer för Grön Marknadsföring.Slutsats: Samtliga företag vill ta ett miljöansvar, men två av tre ser sig även ha ett ansvar att informera och hjälpa kunder till ett bättre handlande. Två av de tre undersökta företagen är mer inriktade på att bygga ett ekologiskt varumärke medan det tredje företaget är mer inriktad på att upplysa om ekologi. Undersökningen visar dock att alla aktörer har undermåligt arbete med marknadsföringen i butik för att fånga upp kunders ekologiska intresse.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system..

An increasingly globalized market is leading to hard competition among manufacturing companies, which means that they are forced to become more customer focused to survive in the market. A Customer Relationship Management system is a system that will be of assistance to help companies succeed in building long term relationships with their customers. Best of Breed and ERP-based are two types of CRM systems. The study has focused on analyzing and examine the need for CRM systems at manufacturing companies. Our question formulation has been:? What need do businesses want to satisfy with a Best of Breed-based and ERP-based CRM system?? Are there any differences in the use of Best of Breed-based and ERP-based CRM system?In this study, we have chosen to carry out interviews and quantitative surveys with manufacturing companies to get their view of CRM-systems.

Corporate responsibility is a popular phenomenon of today. The interest for the subject is extensive and means for implementing corporate responsibility strategies within organizations are demanded. There are studies showing how management control systems can be used in order to implement general strategies into organizations. Still, management control systems designed for the implementation of corporate responsibility strategies, in particular, are not provided by the current academia. The aim of this paper is to contribute to studies within management control systems by studying the management control system specifically designed to implement corporate responsibility strategies.

In 1994 the EU directive of packaging waste was adopted. The result was that all EU member states developed different systems to manage packaging waste and recycling. This paper examines the various systems and the factors that affect the level of recycling. This is done by a cross-sectional study between countries. The results of my study suggest that take-back system generates less recycling than other systems, the mandatory deposit system can affect the recycling in a positive way.

Management control systems are a popular area of research and a lot of new research has been done over the past years. This development has been looking into new situations and circumstances, and interdisciplinary studies are being made to further understand the connection between different fields of study. A new field of study that has grown significantly over the past few years is the connection between management control systems and entrepreneurship. Leading researchers have proposed a number of questions for further research and one of them is the board of directors? use of management control systems in entrepreneurial firms.The purpose of this study was to examine the differences and similarities in the board of directors? use of management control systems between entrepreneurial and non-entrepreneurial firms.The study was conducted as a deductive qualitative study through interviews with respondents from entrepreneurial and non-entrepreneurial firms.

This master thesis has been carried out at Scania R&D at the department for Powertrain Control System Development during the winter of 2010/2011. In the thesis the writer examine and evaluate the existing method for collecting information from the tests carried out during the development of the Powertrain Control Systems software. It also contains suggestions for how a new method that enhance the validation elements could look like.The master thesis uses Vicentes theories of the ecological approach and theories of how knowledge sharing of tacit and technical information works within an organization and between the organization and its customers. First a workplace analysis at Scania R&D is carried out to see how Powertrain Control Systems work and how they test their software. Second a control task analysis, where the aims decided on after the interviews, is compared to the existing method.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

This essay sets out to compare political participation in two e-petition systems: The Malmö initiative in Malmö, Sweden, and Better Reykjavik in Reykjavik, Iceland. The main question of the essay concerns the aggregative and deliberative qualities of the Malmö initiative and Better Reykjavik, as well as the relationship between aggregation and deliberation. This main question is divided into four subqueries that lead the empirical analysis. These are: (1) Which similarities and differences in terms of design are there between the Malmö initiative and Better Reykjavik? (2) To what extent have these systems mobilized an aggregative political participation? (3) What similarities and differences are there concerning aspects of deliberation? and (4) What is the correlation between aggregation and deliberation like in the two e-petition systems?The method in use is a comparative cross-sectional study with a 'most similar research design'.

Near Field Communication (NFC) is a short range wireless communication technology that enables data exchange between devices. NFC is used in many different areas, from subway tickets to authentication systems. This paper presents possible security threats to Near Field Communication and documented attacks that have been used to target various NFC protocols. Weaknesses in different NFC protocols will be presented and suggestions on how to counter certain weaknesses will be discussed. This survey will be valuable for companies interested in protecting their data when using or planning to use NFC systems..

The capacity to extract information from vehicles has the potential to be very beneficial. Performing analysis on information about fuel usage, emission values and other driving properties of a vehicle can lead to great economic and environmental benefits.This report contains descriptions of two prominent systems for retrieving information of this nature from a vehicle, On-Board Diagnostics and FMS-Standard, and of an implementation of FMS-Standard.The conclusion drawn after this investigation is that these systems do indeed offer access to the benefits mentioned earlier, although to varying degrees and with differing prioritisation..

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.