High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

Lyckeby Starch AB is a farmer-owned company that produces products based on potato starch. In order to increase their production efficiency and their international competitiveness the company is investigating the possibilities of keeping their factories open longer. To achieve this, potato has to be stored for a longer period of time than what is practiced today. Starch potato is usually stored in large piles covered by straw and plastic, either in the field or on the farmyard. The objective was to examine in what way starch yield (starch content*tuber weight) in three different potato varieties was affected by storage in two different types of storage piles. The potato was stored for three months in total and starch content and tuber weight were controlled throughout the period. Stored tubers were also visually examined and prescense of mechanical damage as well as wet rots and dry rots was recorded. Bacteria and fungi were isolated and identified. In general, varietal differences were greater than differences between the storage piles.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

Examensarbetets mål är att beskriva och beräkna Arvidsjaurs och Arjeplogs kommuners framtida bergmaterialbehov med utgångspunkt från bygg- och anläggningsprojekt som pågår och som planeras. Syftet är att få en sammanställning som visar om materialet räcker till eller om det finns behov att öppna nya täkter. Sammanställningen kan med fördel användas av kommunerna som planeringsunderlag beträffande nya vägbyggnadsprojekt. Alla tillståndsgivna täkter i Arvidsjaurs och Arjeplogs kommuner har kartlagts och täkternas kapacitet har också tagits fram. Även alla pågående och planerade vägarbeten kommunvis och årsvis från år 2005 fram till 2009 har karterats.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

Aim: The aim of this study was to describe intensive care nurses? experiences communicating with patients during mechanical ventilation.Methods/design: A qualitative interview study. Interviews where analyzed using descriptive content analysisSetting: Nine intensive care nurses from two different intensive care units were interviewed using a semi structured interview guide.Background: Past research has shown that patients during mechanical ventilation in the intensive care unit, feel very vulnerable and the helplessness of being unable to speak. These patients feels that they are completely dependent on the nurses and their competence. It has been shown to be very important that the patient feels included, acknowledged and respected.Results: The analyzed data resulted in a theme; through communication strive to preserve patients´ dignity and three main categories; create relationship to the patient, minimize patients´ vulnerability and don´t give up.

Detta arbete är sekretess belagt under de närmaste två åren och därför kommer bara sammanfattningen att publiceras för tillfället..

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The main purpose of this essay is on one hand to try to find and explain the formula of success of the rock group Status Quo, and on the other to elucidate and explain the foundation and essence in the music made by Status Quo, but also to study how, if and why the foundation and essence have changed over the years. The method of investigation is partly based on a musical analysis of three albums from three different periods: Hello! (1973), Ain´t Complaining (1988) and Heavy Traffic (2002), and partly on a sociological study of the group?s career between 1962 and today, 2005.The first part of the essay concerns the period between 1962-1973 with an analysis of the album Hello!; the second part concerns the period 1974-1988 and the album Ain´t Complaining; finally, the third part concerns the years between 1989-2002 with an intensified analysis of the album Heavy Traffic. In the forth part of the essay I discuss the career of Status Quo from a sociological point of view.I run to the conclusion that the essence of Status Quo is the boogie-woogie comp on Fender guitar by Rick Parfitt, the riff on Francis Rossis´ Fender guitar in combination with the base, the piano and the drums. This has been the essence through all the years, even though it was more difficult to apprehend it during the 1980s.

Background: The majority of the occupational accidents and work-related diseases at Swedish workplaces occur due to poor ergonomics during lifts and transportation of objects. The most common consequence of poor ergonomic conditions is low back pain (LBP) and the risk of developing LBP increases as the mechanical loading on the intervertebral disks grows. This study has investigated the biomechanical loading in the low back during two different types of patient lifts. The first lift (lift A) is developed by Modern Arbetsteknik (MA) and the second lift (lift B) is a common lifting technique among care workers. Objectives: The aim of the study was to identify any advantages or disadvantages with MA?s lift, regarding shear and compression forces in the L5/S1 disc.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

The objective of this qualitative study was to contribute to the understanding of how musical activities affect the participants' well-being and empowerment and to investigate which fac-tors contribute to that effect. Invitations were sent to 13 adult participants in a rock music school in the middle part of Sweden. 7 persons (4 men, 3 women) participated in the study. 4 themes were discussed in focus groups to highlight how informants were affected by the ac-tivity and what factors were important in the context. Results showed that music activities impact on participants' well-being and empowerment through several factors.Themes that appeared were: 1) focus on the present through music, 2) personal development, 3) meaningful leisure activity 4) the group properties.

The purpose of this thesis is to investigate and clarify the facts surrounding one of Vattenfall's district heating plants; The "solar field" and associated rock cavern in Lyckebo, Storvreta. The plant was built in the '80s by the formerly municipal utility,Uppsalakraftvärme AB, as an experimental building. A ground water filled cavern would serve as seasonal storage of solar heat from an adjacent solar field. Since both the energy company and the facility itself has undergone major changes over the past 30 years, there was a great need to gather facts in order to provide a picture of its current condition and potential for continued use. The thesis investigates the plant's history and problems with the rock cavern losses, and how the operation developed. It also presents the calculations regarding the possibilities of again supplementing the facility with solar energy - which is not the case today - as well as the economic conditions for it. Regarding a re-launch of solar energy, primarily a concentrating solar collector has been studied, as it has the advantages of an integrated control system.

It takes a very long time for ionizing radiation of used nuclear fuel toreturn to a natural background level, for this reason one of the requirements for theselection of the location of a repository was that the environment as well people'shealth would be protected from the harmful effect of radioactivity. This requirementmeans that the waste must be isolated in a geological formation. In Sweden therepository will be built in the crystalline bedrock. The location for the Swedish nuclearfuel repository at nearly 500 meters depth at Forsmark in Östhammar was decided 3June 2009. The repository will be located at Söderviken, close to the Forsmarknuclear power plant in a 1.90 billion year old bedrock that will accommodate 12,000tons of spent nuclear fuel.