With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.

Concentration of protein in bovine milk is one of the most significant milk quality parameters, to a large extent determining the price for milk to the producer. Mastitis is a common disease among dairy cows, negatively affecting not only milk yield but also milk protein composition. Milk from mastitic cows tends to have lower cheese yield, negatively affected processability properties and sensory quality, due to changed protein quality and composition. Poorer milk protein quality would have an economically negative impact on dairy industry. Only few studies have investigated the short term effects of mastitis on milk protein composition.

Heartwood has always been a desirable part of the tree, due to it?s superior decay qualities com-pared to the sapwood. How the formation of heartwood works has been known for a long time, but which factors that initiates and stimulates the production are poorly understood. This case study presents the results of a study in which silvicultural treatments and site properties had a key position as factors to the formation of heartwood. According to the hypothesis the amount of sapwood is directly controlled by the size of the crown.

The properties of this material has been studied and it was found that there is very little difference in what affect students in there choice of school, studies and career. Boys who choose hairdressing and styling differ more than girls who choose a career in technics. This is a surprising result which we didn´t expect. In researching background material we learned that it should differ more in perspective of gender. We have compiled the material around young people's choices to high school.

Syfte: Studiens syfte var att jämföra en ny extubationsalgoritm med sedvanligtextubationsförfarande. Gruppen som studerades var patienter som genomgått en HIPEC-operationoch vårdats på Centrala intensivvårdsavdelningen.Metod: I En randomiserad kontrollerad klinisk pilotstudie randomiserades patienterna till en av tvågrupper. Därefter extuberades patienten enligt en studiealgoritm eller post-operativ standard.Resultat: Syresättningen var väsentligen oförändrad för studiegruppen (37,5 kPa till 36,6 kPa)medan den sjönk för kontrollgruppen (50,1 kPa till 40,6 kPa) vid jämförelse mellan 10 minuter efterankomst och 15 minuter efter extubation. Efter 13 till 18 timmars kontroll strax innan patienternalämnade intensivvårdsavdelningen var syresättningen på samma nivå som 15 minuter efterextubation för både studiegruppen och kontrollgrupp. Således kvarstod en försämrad syresättninghos kontrollgruppen vid utskrivning jämfört med 10 minuter efter ankomst.Slutsats: Studien visar att det skulle kunna vara fördelaktigt att extubera patienter enligt denstudiealgoritm som testats jämfört med dagens kliniska standard.

Hospital Mergers have been proved to be troublesome, the most crucial ingredient is believed tobe the participation of members of the organization on all levels. When the hospital mergerbetween the hospital of Malmö and the hospital of Lund is a fact, it seems clear that knowledgeabout managing motivation is important. The knowledge could also lead to increased possibilitiesto improve support for motivation where needed at the hospital.I have through a literature review created a descriptive model of the theoretical view onmotivational factors for participation in change and their relationships. The theoretical modelwhere then tested in a empirical study in which additional data created a more true model of themotivation on participation at the hospital.The findings of the study show how the descriptive model illustrates how the twodifferent departments both work with a empowering philosophy that have built in properties thatenable the employees to gain more motivation. The model also underline the importance of thecommunication role to enlighten the employee in what, where, when and why the change takesplace.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

According to Food and Agriculture Organization newsprint is defined as: Uncoated paper, unsized (or only slightly sized), containing at least 60 percent of mechanical wood pulp. The consumption of newsprint in Sweden was just over 798 000 tonnes in 2009, which represents approximately 90 kg per person. Although there are studies that predict a drastic reduction in newsprint consumption in the Western world, there seems to be a clear difference between forecasts for the future given by statistical analysis of newsprint consumption and forecasts given by experts in the industry. The former predict a continuing increase while the experts see a coming decrease in consumption.In this report, both demand and business strategies of newsprint in Sweden are studied. The study also presents a forecast of the future which is based on historical data and qualitative interviews.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

The society in which we live is controlled by various kinds of rules, both written and unwritten. These rules tell us not only how we should act as humans but also how we should act as women and men. Adults teach their children the rules of the society in various ways, but they also act as model figures. Children are influenced by conscious and unconscious actions and also by activities performed by the adults. Furthermore, adults write children?s books which bring the essential content into children?s lives.

The Swedish Board of Agriculture initiated this undergraduate thesis. There is a database on their homepage that includes chemical treatments for different weed species. There is also space for preventive and mechanical control methods. This is an undergraduate thesis that reviews these control methods for the most important weeds in Sweden. The species reviewed are: Creeping perennials: Common Couch Elytrigia repens (L.) Desv. ex Nevski Creeping Thistle Cirsium arvense (L.) Scop. Perennial Sow-thistle Sonchus arvensis L. Field Horsetail Equisetum arvense L. Colt's-foot Tussilago farfara L. Stationary perennials: Dock Rumex L. Mugwort Artemisia vulgaris L. Dandelion Taraxacum F.

The purpose of this essay is to find out if liming with Ca(OH2) and CaO can reduce leachingof phosphorus from agricultural land and the problem with eutrophication. This purpose alsoincludes getting knowledge about how to make the phosphorus retained in the soil and beaccessible for the plants. This essay is supposed to show if more research is needed in thissubject. There has not been much research about this subject and therefore the amount ofmaterial to study is limited in this literature review. The research reports that have beenstudied have similar results.

The idea behind this project came from a feed study executed two years during the lambing season. Both years wool loss was experienced. Low temperature in combination with shearing was believed to cause the wool loss the first year, while protein deficiency was believed to be the cause the second year. In the literature many causes of wool loss are described; mechanical wear, telogen effluvium, bacterial dermatitis, external parasites, wool break, scrapie, genetic causes and nutritional deficiencies are some examples. The aim of this thesis was to study causes for wool loss and how common wool loss is in Swedish sheep herds.

Discharge of inadequately treated waste water containing nutrients such as phosphorus and nitrogen as well as organic matter and bacteria is associated with a risk of eutrophication and contamination. The Swedish government has decided upon several Environmental Quality Objectives aiming to reduce the emissions of nutrients to water bodies.In Sweden, there are between 675 000 to 1 000 000 on-site sewage systems. Recent studies have shown that the function of small sewage treatment plants is in many cases insufficient. To prevent this regular service and supervision by a professional is needed. The focus of this study are small sewage treatment plants which use a technique where mechanical, chemical and/or biological reduction of pollutants is being used in the same facility to reduce nutrients in household wastewater.The aim of the study is to investigate how different municipalities ensure that small sewage treatment plants fulfill the requirements and reduce pollutants as efficient as the manufacturers claim.