This bachelor thesis in Mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

Vitamex AB är en nordisk egenvårdskoncern med huvudkontor i Norrköping som tillverkar och säljer naturläkemedel och kosttillskott. Inom Vitamex Production AB finns ett reklamationssystem för interna och externa reklamationer som hanteras pappersvägen. För att underlätta hanteringen önskade man ett webbaserat behörighetsstyrt datasystem. I det här examensarbetet beskrivs utvecklingen av ett webbaserat system där fokus har lagts på användbarhet. För utvecklingen har designteorin Usability Engineering använts.

This master thesis investigates how the county administrative boards communicate the regional risk and vulnerability analyses to municipalities in Sweden. Information has been gathered through a survey and through a case study involving three county administrative boards. The results revealed that there are possibilities to improve or develop the communication in all the county administrative boards. The information channels are often written or web based, these channels promote one way communication rather than a dialog. The thesis gives suggestion on how to work out a strategy for a more effective communication, the case study also gives ideas on how a county administrative board can work with communication..

Detta examensarbete ger en introduktion till Requirements Engineering (RE), kravprocessen i informationssystemutveckling. Det slutliga informationssystemet är i stor utsträckning beroende av en effektiv RE-process. Ett framgångsrikt informationssystem beror på hur väl det färdiga systemet stämmer överens med användarens och andra intressenters behov och förväntningar. Use Case är en teknik som kan användas i RE-processen för att representera krav. Arbetets syfte är att finna de för- och nackdelar som finns med Use Case för att representera krav.

This paper describes the evolutionary development of an information system for a small company. The company performs overhaul of forklifts and cleaning machines. The company has already an information system that handles the reports from these overhauls but it needs a supplementary tool that assist the chief planner to plan forthcoming overhauls.It should be able to display coming overhauls in a timetable and eventually print them, either to a PDF file or to a document. The timetables this function produces will help the chief planner and the assemblers to get a good overview of their day-to-day work.The tool needs to be intelligent in that way that it takes into consideration were in the country different assignments will be performed. So that time consuming travels over great distances can be avoided.

This thesis primarily includes a study on whether companies can develop a mathematical activity that supports students' motivation in mathematics. The work was done together with Midroc Electro, a company that pays attention to the difficulty of recruiting and therefore was interested in investigating how the business world would be able to contribute.The thesis can be divided into three stages. The first part comprised by a exploration into research on student motivation regarding mathematics as well as numerous interviews with engineers to see how the research findings did fit with Midroc Electros reality. In these studies it became clear that the student who aims for a profession whose education or work requires math belongs to the group of students who primarily manage their studies in mathematics, that is, those that have the greatest motivation to work hard and complete their studies.Research information and interviews were compared and resulted in the thesis second part, Midroc Challenge. An activity where students primarily came to learn about the engineering profession and secondly how mathematics can be used in the engineering profession.

ABB is one of the world?s leading engineering companies in power and automation technologiesand their solutions improve performance while lowering environmental impacts for energycompanies and industries. ABB FACTS designs equipment and plants for series and phasecompensation.This thesis has been performed at ABB FACTS on the Mechanical Design (DM) department inVästerås, Sweden. The purpose of the thesis was to develop and design calculations andsimulation tools for ABB FACTS?s standard series capacitor platforms.

This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

This masters thesis deals with smoke spread via ventilation systems. One aim of the thesis is to investigate and explain the differences in efforts to prevent smoke spread via ventilation systems in different countries. A second aim of this thesis is to investigate how frequently occurring smoke spread via ventilation systems in Swedish buildings are. A third aim is to investigate how uncertainties in input variables to smoke spread calculations will affect the result of calculation. To be able to do this the most important input variables are identified and analysed.

Requirements Engineering processen, RE-processen, är den tidiga fasen i ett systemutvecklingsprojekt, där RE-processens syfte är att identifiera, verifiera, validera samt dokumentera en mängd krav som ett nytt eller utvidgat system skall konstrueras efter. RE-processen skall mynna ut i en kravspecifikation där de dokumenterade kraven finns samlade.Detta examensarbete behandlar ämnet systemutveckling och fokuserar på konsultföretags metodanvändande under RE-processen. Att fokus ligger på RE-processen beror på att denna fas är den mest kritiska delen i ett systemutvecklingsprojekt.För att få svar på vilka metoder som konsultföretag använder under RE-processen har en intervjundersökning gjorts.Resultatet av undersökningen visar att konsultföretag använder olika metoder under RE-processen. Sättet att använda dem fungerar på ungefär samma sätt med ett aktivt deltagande från kundernas sida. Systemutvecklingsmetoderna är också uppbyggda på liknande sätt med samma synsätt att arbeta efter..

Arbetet redovisar möjligheten att parametrisera 2D-ritningar hos Solyvent Fläkt AB. Flertalet koncept har utvecklats och det mest lämpade konceptet har valts ut genom en konceptjämförelse där konceptens för- och nackdelar har vägts mot varandra. Konceptjämförelsen har slutligen presenterats för företaget..

This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.