The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Ethical evaluation of scientific studies carried out using animals is legally mandated in many countries and has been so in Sweden for over three decades. The animal ethics committees (AECs) responsible for the task have however been subjected to criticism; common critique being that the wrong issues are discussed and that the ethical evaluation is thus incomplete, that there is a lack of coherence across committees and that the committees are not as democratic as they might appear. This study investigates the view of Swedish AEC members on a number of issues in order to shed some light on the mandate and functioning of the committees, and on the grounds for ongoing criticism. In a survey and interviews AEC members and other persons connected to the committees gave their views on the AEC task in relation to their roles, the ethical evaluation per se and whether or not emotions such as empathy play any part in it. There were significant differences found between AEC member categories and several issues were encountered, many of which have been stressed in previous studies.

The aim of this study was to illuminate how social workers in social services work with the social phenomenon, homelessness in two municipalities. The study is based on qualitative semi-structured interviews with interviewees from a department of social services. Our theories that we used was resistant inequality, structural discrimination, exclusion, empowerment and representation. After compilation of our empirical our conclusions are that homelessness is a complex phenomenon. Social workers handles homelessness based on client?s needs and the work is individualized.

Denna rapport är resultatet av en studie kring kostnader för brandskydd av stålprofiler. Rapporten inleds med en beskrivning av problemet att hitta den ekonomiskt bästa lösningen för brandskydd av stålpelare i en konstruktion med specificerad brandklass. Därefter följer en allmän del om brandskydd och en övergripande redogörelse för gällande lagar och föreskrifter som har betydelse för brandskyddsdimensioneringen. De laster och förutsättningar som ligger till grund för valet av pelardimensioner beskrivs och valda dimensioner redovisas i tabell. Därefter följer en beskrivning av de brandskyddsmaterial som studerats: inklädnad med gips-, fibersilikat-, och stenullsskivor samt brandskyddsmålning.

This essay is about the meeting of the pedagogic mission and the reality of the conditions in preschools. It is about the frustrations that I, as a pedagogue, experience when I cannot fulfill this mission. An example of this is working when understaffed.My purpose is the acknowledgment of two main areas of the curriculum: caring and learning. This essay demonstrates the diversity of the occupation and it ?s constant need of positioning.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

Denna undersökning behandlar spel i kontext till lärande och matematik. Genom att gestalta ett spel undersökte vi, författare hur olika designval kunde påverka lärande. Målet var att spelare skulle lära sig genom situationsbaserat lärande och där genom få möjlighet att överföra sin kunskap till sitt vardagsliv. Undersökningen hade sin utgångspunkt i ANT (actor-network theory) som användes som metodologi för att analysera och reflektera över de val som gjordes. MDA (Mechanics Dynamics Aesthetics) användes som ett ramverk för att utveckla själva gestaltningen.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Muntlig kommunikation kan vara begränsad eller omöjlig när patienten är intuberad vid respiratorbehandling. Intuberingen hindrar talet och detta kan vara frustrerande för många patienter. Syftet med studien var att belysa hur intuberade intensivvårdspatienter upplever kommunikation. För att genomföra studien valdes systematisk litteraturstudie som metod. Resultatet baseras på 11 artiklar.

Background: Society of today is characterised by greater dynamics and a constant demand for innovation and fresh ideas. This development is often named "the new economy" or "the knowledge society". Independent of how one chooses to name this society, most individuals seem to agree upon the fact that knowledge grows more and more important. New competencies, such as new knowledge and new forms of organising, will be demanded for corporations to be successful in the future. In recent years it has become more common with corporations based on projects.

Drawing on a broad theoretical framework that includes theories about globalisation and honourculture, this thesis aim is to demonstrate that globalisation and honourculture, constitute a conceptual network, i.e a structural relational matrix in which concepts are embedded. Being part of conceptual network, these concepts are related to each other ontologically. The idea of conceptual network, and the thesis as a whole, draw upon what has been called ?relational perspective?This study aims to show the impact of globalisation on honourculture. The study shows the importance of narrative in the construction of discursive boundaries.

As social interactions migrate to the ubiquitous Internet we are facing a change in theway we relate to each other, which presents interesting new opportunities foranonymity to create identities. An aspect of this radically evolving technology thatexhibits strong possibilities for altering or producing identities is the rapidly growingonline game genre MMOG (Massive Multiplayer Online Game) which isentertainment that millions of people all over the globe engage in daily. Thisrelatively new platform for socialising has become of cultural and social significance,which is why it calls for examination and research. Thus, the main research questionsasked in this thesis are as following: How does players of MMOGs utilise the nighcomplete anonymity to present or modify their identities online? In which ways areMMOGs used as a platform for socialising and development of social groupdynamics? After observing a large group of players in a popular MMOG, as well asconducting several interviews with key identities within the group, I discovered three fundamental parts of identity creation, and created a model for use and applicationin different social situations and constellations..

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.