Företaget Radius Control Systems AB sysslar huvudsakligen med utveckling och underhåll av SCADA applikationer. Radius hade önskemål om att kunna visa väderinformation från en väderstation i Radius egna övervakningssystem Uni-View. Detta skulle ske via ABB: s styrsystem AC 800M/ 800xA, med en PM856 processor. Arbetet handlar om att upprätta kommunikation mellan en PLC och väderstation, och från PLC vidare upp till Uni-View. Rapporten behandlar hela arbetsprocessen med början från en prototyp till ett fungerande system.

The BSC is widely used mangement tool that is turning the vision and strategy into operational goals. However, after analyzing the criticism received the BSC, it seems af its internal focus, rigidity, static-ism and mechanical mindset limits the company's ability to create a strategy that takes important external factros into account..

The Master of Science in Energy Systems Engineering program at Uppsala University started in 2000 and 221 students has graduated since. This master thesis aims to answer what competencies alumni considers most important for successful professional practice. It also seeks to find out how these competencies are reflected in the program to identify potential gaps between importance and how the competencies are being prepared. With inspiration from similar research a method has been developed consisting of two steps: (1) A survey and (2) interviews with alumni. The alumni survey rates the professional importance of 13 competencies and how well the corresponding competency is prepared in the program.

This thesis examines the subject of change in public administration from an instrumental and an institutional structure perspective. The purpose of the thesis is to examine whether institutional structures affect the development of instrumental structures and if it in turn is possible to affect institutional structures by changing the instrumental structures. This case study is primarily based on a series of deep interviews with senior administrators and politicians within two new administrations in the municipality Karlstad, both which have been created by merging several smaller administrations, but also thorough analysis of several official document such as protocols from the municipal council meetings, Tja?nsterskrivelser and internal PMs.   The result of the analysis indicates that both institutional structures and the forming instrumental structures affect each other and  that their ability to affect each other depends on the dominance over the organization each structure has.  In my specific research case we can see that the institutional structure of the city-technical and housing administration has affected the outcome but the institutional structure of the cultural and tourism administration hasn?t.  While the structural change of the city-technical and housing administration hasn?t effected the institutional structure but the structural change of the cultural and tourism administration has affected the institutional structure of this specific administration..

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

A new type of forest tree seedling, called mini seedling, has been developed by the University of Dalarna in Garpenberg, Sweden. Compared to traditional containerized seedlings that are grown for 1 ? 2 years, mini seedlings are grown for only 10 weeks. The mini seedlings are small, easily planted, cost effective, and reduce the amount of chemicals used in the nursery. Research has shown that mini seedlings tend to have higher overall survival rates than traditional container seedlings.

This thesis includes a mechanical engineering design work performed incollaboration between ÅF and Halmstad University. The work is done by FredyOlsson?s methods of Principle- and Primary Construction and David Ullman?stheories of Design for Assembly.The group was commissioned by ÅF to produce a concept to narrow down theassembly time of today?s luggage doors by reducing the numbers of adjustmentoptions. They also wanted it to be easier to mount the assembly by making itpossible to adjust the door in a closed position. Today luggage door takes, with its10 adjustment possibilities, around 4 hours each to assemble and ÅF wanted anassembly time around 10 minutes per door.Initially a preliminary study was made where the group began reviewing today'sconstruction and mounting of rails and doors on buses.

This report describes the master thesis project ?Weight Optimization of a Composite Chassis for a Multimodal Lightweight Vehicle? which is a part of the Master program in Naval Architecture and a part of a research project at the Centre for Naval Architecture, KTH. Demands on smart and energy efficient transport solutions are continuously increasing. In the Stockholm region the citizens are expected to increase with 25% and the road vehicles with 80% until 2030, putting high demands on the traffic system. Using a small multimodal vehicle deals with this problem and uses both the land and waterways for transportation.

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

Detta arbete är en magisteruppsats i Systemvetenskap med inriktning data och systemvetenskap, 10 poäng, vid Luleå Tekniska Universitet. Uppsatsen klargör vilka faktorer som avgör en användning eller icke-användning av Case-teknologin. Case-teknologin möjliggör ett ingenjörsmässigt närmande till mjukvaruproduktion och systemutveckling genom att tillföra nödvändig systematik, standardisering, automation och kvalitetssäkring. Ett stort antal undersökningar är gjorda genom årens lopp med syfte att förstå och förklara varför det som teoretiskt borde vara lösningen på problemet med undermåliga system inte tycks ha blivit detta. Resultatet av undersökningen tyder på att de variabler som Prekumar och Potter kom fram till i sin forskningsmodell ? relativa fördelar, kostnad, komplexitet, kompabilitet, produkt förespråkare, stöd från ledningen och operativ expertkunskap har störst påverkan på användningsbenägenheten av Case-teknologi..

The thesis aims to examine how companies optimize the human capital from a value creation perspective. The value creation will be related to transfer of knowledge, recruitment, staff turnover and development. The thesis has a deductive approach and six qualitative interviews have been conducted. The results from the interviews will be strengthened with a quantitative data analysis of two measurements; value added per employee and human capital efficiency. The theoretical framework includes definitions of human capital.

The thesis of this Masterpaper has been to analyse what tendencies there might be to distinguish structural alterations in the publishing business today and how they can be understood analytically. The following questions have helped form the principal opinions found in this essay: - What tendencies according to the alterations in publishing business is Piratförlaget representing? -What tendencies according to the alterations in publishing are the literary agents representing? What tendencies regarding the alterations in publishing are the electronic publishing and other techniques related to the publishing business representing? Participants, familiar with the publishing industry in various ways, have been interviewed. The main theory is based on facts from sociology of literature, although Faheys and Randalls Key Scenario, with its driving forces, also provided a great deal of help. In addition, to structure the dynamical publishing business, Peter Senges The Systems Iceberg Model was useful.

The focus of this essay is Swedish bilateral development aid. With the help of organization theory I analyse the development aid strategies and policies of the 1990s, in order to examine how and why they were introduced. I investigate three different types of aid organization, namely structural adjustment programmes, political conditionality tied to aid co-operation, and equality policy as part of development co-operation. I analyze the introduction and subsequent use of these three co-operation forms to see whether they were applied and adopted into Swedish development aid because more efficient measures were required or because they were the most recent and modern ways of dealing with development co-operation.Organization theory presents these two ways of analyzing organization. They are occasionally competing and sometimes complementing each other in explaining organization.

The purpose of this master thesis is to construct a steering transmission, for a trackedvehicle, containing two hydraulic circuits which are connected. The steeringtransmission should be mechanical to avoid steer-by-wire.BAE Systems Hägglunds has in an earlier study examined a system with two hydraulicpumps and one hydraulic motor, but the safety of the system wasn?t sufficient.To achieve sufficient redundancy there must be two hydraulic motors, which arecontrolled separately. When the two systems are connected in one point, this point is acritical part of the system because it directly affects both circuits. If one of the hydrauliccircuits fails the other should be able to operate independently as a steeringtransmission.

The purpose with this report is to illuminate the construction solutions and the deformations that could exist in medieval parish stone churches. But also to increase the writers understanding how activity forces effect the construction of the churches. With help from literature and a practical study, containing three churches the writers have collected the material that the conclusions and discussions are built upon in this report. The construction of the churches consists of three parts, the wall, the roof and the vault. The construction solutions are similar in the churches disregard of the roof, where the roof trusses are different.