Urban agriculture is a current topic and this study examines the possibility of cultivating on balconies in the city. The study was performed at Uppsala University and examines, from a structural engineering perspective, how different existing balcony/terrace structures are affected by cultivation. A cultivation balcony defined in the study as a balcony/terrace which is specifically designed for cultivation. Three units of study have been selected according to this criterion. Four factors were examined, these were loads, moisture/water, economy and cultivation.

I wanted to focus this essay on the operative?s perspective of running religious organizations in the city of Karlstad and to see positive and negative aspects of their day-to-day life working with their organization, following up with a comparison of the difference and the similarities between those groups. After delimitating which groups I was going to examine, I implemented a qualitative study of four people, from two different religious groups, whom I performed interviews with. My method of performing these interviews and understanding the perspective of the informants, I had a semi structured interview guide along with a recent study that was opting for similar conclusions, only in a different county and with different input perspective. The result of my study showed a difference in establishment of their region but with a lot of similarities in problems with their religious and structural premises.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

There are two groups of haulage contractors in roundwood transport , those who are contracted direct by the transport buyer and those who are connected to a freight company which in its turn is contracted by the transport buyer. Today the roundwood haulage is dominated by contractors with one to two lorries. The effort of coordinating transportation for a transport buyer is dependent on how many communication contacts that must be managed (how many individual haulage contractors the transport buyer has to work with). A structural change in the sector that leads to a decrease in the number of haulage contractors but an increase in the capacity of each contractor, makes it possible for a transport buyer to coordinate transports with fewer communication contacts. The reason why a company reaches a certain size can be explained by the number of contracts it makes and manages.

Övergången från CATIA V4 till CATIA V5 innebär nya möjligheter för konstruktörerna på Scania att arbeta med Knowledge Based Engineering, KBE, för att effektivisera och kvalitets-säkra sitt arbete. Då CATIA V5 är en ny plattform som innehåller verktyg med samlingsnamnet knowledgware, för att bygga in kunskap i modeller ville Scania undersöka potentialen i att arbeta med KBE, och hur detta skulle kunna ske på Scania. Vid traditionell produktutveckling tas en helt ny artikel fram vid behov och ofta innebär detta att arbete som tidigare utförts, görs om igen. Syftet med arbetet är därför att undersöka huruvida KBE i CATIA V5 kan erbjuda möjligheter att återanvända kunskap från tidigare arbete och samtidigt kvalitetssäkra denna, samt utreda vilka knowledgewarelicenser som i så fall kan vara lämpliga för Scania.För att göra detta har en litteraturstudie genomförts för att undersöka vad som har gjorts inom området, och även en intervjustudie har utförts inom R&D på Scania. Vidare har sakkunniga på Linköpings Universitet och Tekniska Högskolan i Jönköping intervjuats.

This study deals with integration between core subjects and character subjects on the upper secondary schools Electrical Engineering Programme. The purpose is to investigate how four teachers define subject integration, which the advantages and disadvantages are according to them and what the purpose is whit integrate the core subjects and the character subjects.The finding in this study highlighted that between themselves the teachers had different definitions of subject integration. In order to start up with a integrated working model the teachers had to come up whit a mutual definition of subject integration..

Calculated and measured energy in residential buildings is going to differ. The reason to this may be due to many factors. In this study there is a study on how these factors affect the energy use in a building. To get an insight in what defines energy, there is first a description of energy supply both worldwide and used in Sweden, followed by a description of the energy balance. In this study energy will be studied in residential buildings only.

The aim of this report is to improve the fire safety at Hallsta Paper Mill in Hallstavik, Sweden. In order to do so large parts of a fire-protection management system for the paper mill has been created. The report begins with giving a general description of management structures and fire-protection management systems. An account is given for how management structures are designed, and how they should be implemented, maintained and updated. Thereafter follows a description of what routines and instructions should be included in a fire-protection management system..

Municipal safety work is an issue frequently discussed. The new legislation about accident prevention obeys the Swedish municipality to present an action program for accident prevention. In Borlänge municipality there has been no sanctioned proposal for a program. This report presents the problems found and gives proposals for improvements in the future safety work. The guiding words should be unambiguousness, able to control and not too complicated.

Risk analysis in connection with transportation of dangerous goods is associated with great uncertainty. In addition there are a number of specific problems that the risk analyst faces when risks associated with transportation of dangerous goods are to be analysed. In this report those problems and uncertainties are described.One of the most important conclusions in this report is that uncertainty analysis within risk analysis in connection to transportation of dangerous goods has to be made more effective..

Problem statement and purpose:The purpose of this study was to analyze in what way first-time voters chose to take part of political information. The questions we aimed to answer was how first-time voters use media and other information channels for political purposes, what importance and trust the first-time voters give the different information channels and finally which indicators there is for that structural or individual factors affect the media consumption and political interest.Method and material:We did interviews with twelve 18 years old first-time voters from six different high school programs in Sundsvall, Sweden.Results:The study showed that the premier source of political information were traditional news media, in particular the debates on TV. It?s also in the debates the first-time voter?s trust the most. Even though the social medias are constantly present in their everyday life and even though the first-time voters believe the social medias have potential for engaging young people politically, the possibilities are only taken in advantage by people who are already politically interested.

Syftet med detta examensarbete har varit att ta fram ett snabbfäste för ramar åt Roxtec International AB på Verkö i Karlskrona. Examensarbetet har följt metoden för Integrerad produktutveckling av Fredy Olsson. Av denna metod har två områden berörts: Principkonstruktion samt Primärkonstruktion. Primärkonstruktionen är uppdelad i två delar där den ena behandlar komponentval och detaljkonstruktion, och den andra innefattar framtagning av prototyp och en ekonomisk kalkyl. Problemställningen var följande: Att ta fram ett snabbfäste för små ramar. Ramarna används till kabelgenomföring till elskåp och liknande applikationer, och de kommer att innehålla Multidiametermoduler med inneslutna kablar och kompressionsenhet. Idag fästs ramarna med hjälp av skruvar och muttrar men det nya fästet får inte utgöras av skruvar, sprintar, fjädrar och de får ej heller svetsas fast. Fästet ska vara av enkel konstruktion, lätt att montera och demontera utan hjälp av verktyg.

Texo Application has created robots that they call for satellites; with these you can feed in storage pallets into a satellite storage. Satellite storages consist of channels in height (e.g.3 to 8 pieces) and width (e.g.3 to 100 pieces). Channels can be different long (e.g. 5 to 200 pallets). At deposit of a storage pallet the truck insert the satellite in a channel and then the pallet, the pallet is driven into the channel until it reaches another pallet or the other end.

The aim of this report is to examine the possibilities to use network theories to perform vulnerability analysis on complex networks. The scoop of this work is also to improve the possibilities to chart, analyze and present the vulnerability in a power grid. In this report it has been, using power outage statistics, possible to verify, that network theories can be used to evaluate the vulnerability of an infrastructure network. However further studies to establish values on how vulnerable a network is are needed..

This report is the result of a project work carried out at Karlstad University in conjunctionwith the local consulting firm Camatec where most of the work has been performed.The work can be classified as a classic engineering work with supportive theories andcalculations which in this context is relevant.The engineering project has focused on developing new standards for a conveyor that is usedin the Värmland paper industry where large rolls of paper are produced. A conveyor can takeits appearance in many different forms but in this thesis it has been an exemplary look and ithas also become modulatable with a central section, a drive end and a turning end.The construction work has been build under CAD programs such as Pro Engineer, drawingshave been created and costings have been analyzed. Strength calculations have been made andcooperation from several different companies have erected to explore different solutions andideas for a modern and sustainable conveyor..