Sök:

Sökresultat:

4155 Uppsatser om Mechanical engineering - general - Sida 33 av 277

Implementering av ARINC429 testutrustning med 16 kanals kommunikationskort och dataSIMS

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

Indexeringskonsistens: En litteraturgenomgång och en undersökning i LIBRIS

The aim of this thesis is to investigate indexing consistency in LIBRIS, a Swedish national union catalogue, where searches can be carried out among almost five million titles. To calculate consistency, indexing terms of translations and indexing terms of documents in their original language have been compared. I have used a total of 100 such pairs in the study. There is a lot of different methods that can be used when consistency is calculated, in this study Hoopers and Rollings methods have been used since they are two of the most commonly methods used and also have the advantage of being fairly simple to use and understand. In the thesis, differences in consistency between indexing terms consisting of names and general indexing terms and differences in consistency between controlled indexing terms and uncontrolled indexing terms are also compared.

Inventory and evaluation of Nairobi Animal Orphanage : focusing on routines and feeding, black-backed jackal, lion and patas monkey

This BSc thesis is an introductory step to the collaboration between the Swedish zoo Skansen and Kenya Wildlife Service (KWS). It constitutes of an inventory of the Nairobi Animal Orphanage (AO), a facility that cares for injured and abandoned wildlife species in Kenya. Through the cooperation with Skansen, the KWS will improve their management of the AO. The aim of the inventory and BSc theses is to evaluate the management of black-backed jackal (Canis mesomelas), lion (Panthera leo) and patas monkey (Erythrocebus patas) regarding their biological needs. The general enclosures, routines and feeding at the AO are also evaluated since they have a great influence on the management of captive animals.

Värdefullt förfall : om ruiner i förändring

This essay deals with ruins from the perspective of their cultural values ??and the impact of add-ons, protective add-ons and caring actions affect these values. The issues in the essay are; What are the cultural values of a ruin?  How have ruins been used?  How are ruins treated today?Initially the definition of the concept ?ruin? is discussed, what is a ruin? A building has an architectural biography: the creation, destruction, change and the decay. The concept of ruin is considered to be a state of this decay, rather than a dead building.

Lilla Fjellsholmen. Varsamt byggande i en unik skärgårdsmiljö

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

Rummet emellan arbeta isär och leva ihop

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

Direktiv 2001/18/EG om avsiktlig utsättning av GMO och dess inverkan på svensk rätt : en europarättslig studie om svensk institutionell och processuell autonomi samt principen om god förvaltning

This master's thesis on the subject of public law will deal with the implications ?Directive 2001/18/EC on the deliberate release into the environment of genetically modified organisms? might have on the Swedish legal system. The purpose of the directive is to harmonize the European Union States legislation regarding licensing of the deliberate release of GMO?s into the environ­ment, this to maintain a high level of environmental protection and at the same time preserve the internal market of the European Union. The thesis will primarily examine how the provisions of the directive relating to the general principle of good administration have impacted the proce­dural autonomy of Sweden.

Industriell produktion av loggia - en studie om loggiarum som alternativ till inglasad balkong

AbstractIntense competition in the building industry has forced building companies to develop highly efficient and optimised building solutions. This project, with a loggia that works both as an extended living room and a glazed balcony offers a highly economic viable alternative to standard balconies. This alternative is likely to attract build master since the area of the loggia will be part of the apartment area, i.e. included in the area for rent..

Skånes landskap - ett industriminne? : en betraktelse med utgångspunkt i Findus ärtodling

This paper argues that the food industry in general and the one taking place in Scania in particular, are disregarded in the official management of industrial preservation carried out in Sweden today. Despite the articulated ambition of a cultural heritage that as many as possible could identify with, the practice tend to create an industrial heritage based on stereotype ideas about the landscape in Sweden and the characteristics of industry. The way the open land of Scania differs from the traditional image of the appearance of Sweden, is used as one possible way to explain why the food industries of Scania are overseen in the management of industrial heritage. It is also argued that the high number of female employees might bee a reason why the food industries in general are given low priority in the practice of cultural heritage. By putting the Findus pea industry and the cultivated landscape that provides the factory with primary products against the official criteria for industrial memories, it is examined what values for preservation the food industry contain..

Utvärdering av chefskap som metod för ledarskapsutveckling inom den offentliga sektorn

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

Den informella kommunikationens betydelse för de anställdas välbefinnande på Tetra Pak Packaging Material AB på Tetra Pak i Lund

Work is an important part of the lives of humans, fulfilling several functions; it establishes possibilities to interaction and to feeling as belonging to a context, it gives structure to time and space, creates common goals and it leads to a general well-being in individuals. For the well-being of employees it is essential with recuperation in a pleasant environment where you under relaxing and informal forms have a chance to interact with colleagues. The aim of this study was to investigate to which extent the employees of Tetra Pak Packaging Material AB at Tetra Pak in Lund experience that the informal communication during the coffee-break contributes to their well-being. The aim was also to distinguish if this potential well-being effects how the employees experience how work in general makes them feel. The hypothesis of the study is that the coffee-break effects the well-being in a positive way, and that it has a positive effect on how work in general makes the employees feel.

Laserexperiment för grundskola och gymnasium

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

Webbsäkerhet och vanliga brister - kunskapsläget bland utvecklare

This bachelor thesis looks at developers knowledge about web security both regarding their own view on their knowledge and their actual knowledge about vulnerabilities and how you mitigate against them. Web developers knowledge regarding web security are becoming more and more important as more applications and services moves to the web and more and more items become connected to the internet. We are doing this by conducting a survey among developers that are currently studying in the field or are working in the field to get a grip on how the knowledge is regarding the most common security concepts. What we saw was that the result varies between the different concepts and many lack much of the knowledge in web security that is getting increasingly more important to have..

Vad är det som skiljer vuxna med diabetes, i att bemästra sin sjukdom

Background: Diabetes is a common disease where the degree of self-management is of paramount importance. Individual factors influences both cooping and general wellbeing among diabetic patients. Glycemic control is known to be important but other factors ought to be considered. Aim: The aim of this study was to describe how individual self-management influences the general wellbeing among adult diabetic patients. Method: This literature study is based on scientific articles.

Undersökning av modern reproduktionsteknik för
karosseridetaljer

En marknadsundersökning av förekommande metoder för digitalisering av karosseridetaljer. Olika skannertyper analyserades och en rekommendation av lämplig metod lämnades till uppdragsgivaren. Förutom punktantal beaktades även punktorintering, inskanningskostnad/tid, positioneringssystem och mätrymd. Uppdragsgivaren rekommenderades att använda en optisk skanner för projicering av fransar med ett optiskt spårningssystem. Då tillverkning skall ske i mycket små serier berördes även olika tillverkningsmetoder, som exempelvis hydroformning mot ett formverktyg av aluminium eller kompositcement.

<- Föregående sida 33 Nästa sida ->