Projektet bestod i att utveckla en anläggning för personsanering av biologiska-, kemiska- och nukleära stridsmedel, en så kallad NBCanläggning. Arbetet har initierats av Marinens Sjösäkerhetsskola i Karlskrona. Under arbetets gång har Fredy Olssons produktutvecklingsmodell tillämpats. Projektets tyngdpunkt har legat i att söka komponentalternativ för de önskade ändamålen och för att uppfylla kraven. Anläggningen är långt ifrån produktionsklar, men ett omfattande grundarbete har gjorts inför ytterligare bearbetning och komplettering med beräkningar samt vissa komponentval..

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

This paper reports a study in how interaction design and graphic design is affected in the process of developing an mobile application to complement the use of an existing webbsite. The paper also ask how developers are affected in this process by the use of designpatterns. The purpous of the report was to see how designpatterns affects the development of mobile applications and how the interaction and graphic design differs between various company webbsites and their related application. A study was conducted by comparing three diffrent webbsites with three related applications to find material for our thesis. Interviews were conducted on three diffrent companys that work professionaly with creating mobile applications.

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

In order to increase the independence in everyday life of the elderly population, we have developed a lifting aid for loading in the private car trunk. Independence from outside assistance affects self-esteem in a positive direction and can help increase the quality of life for a large group of individuals. As people age and experience changes in performance, it is important that aids and support is available, particularly to reduce the experience of aging and it?s increasing physical limitations. The aim was to develop a function prototype characterized by simplicity, which facilitates loading of the private cartrunk.The project was conducted at the request of Autoadapt AB, which is one of the leadingactors in car adaptations for individuals with disablilities.

En presentation av Kungliga Svenska Baletten. Denna ska distribueras till operahus världen över innan ny turné påbörjas. Shanghais operahus var det första som fick den färdiga produkten.Fördjupningen rör olika operahus design och arkitektur ut- och invändigt. Även en del av husens relevanta historia tas upp..

När ett nytt databassystem ska tas fram och införas i en organisation ska funktioner och krav på systemet identifieras och analyseras i en designprocess. Ett krav på ett databassystem kan vara att systemet ska uppvisa en viss prestanda. Designprocessen leder så småningom fram till fysisk design av databasen och dess applikationer. Det kan finnas flera olika lösningar för fysisk design av databasen och dess applikationer som tillgodoser kraven och funktionerna som ska finnas i systemet. Dessa olika lösningsalternativ ger olika prestanda.

The outset of this thesis is to raise questions on how we design for the mobile context and the capabilities of smartphones. Not only the presentation but also the use of input and interaction between a service and a user.This work evolves around sign up forms and answers the question: How does the sign up process affect the holistic perspective of a digital service regarding usability and user experience? This thesis consists of a case studies, and design experiments conducted on Twitter, Instagram and Randos sign up processes to explore if and how the usability, and the user experience could be affected and im- proved.This concluded some important aspects to be considered when designing sign up forms for a digital service.The usability, and the user experience is not only affected by user interaction, and the choice of input method but it?s also affected by which data the service is requesting, and more important; if that data is motivated to request by the service..

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Trädgårdens hantverk och design 21 hp.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

I chose to do this work because I believe that today?s industrial designprofessionals lack in their task of creating aesthetic experiences and aestheticdiversity.With my work, I want to question why the majority of today?s technical, massproducedeveryday products have such a similar design expression, andwhy alternatives are so few. Most of all, I take a critical attitude to today?sstereotypical industrial design aesthetics that I would describe as technical,masculine, and unnecessarily complex.I have designed a number of products that show alternative aesthetics in thissegment and as such I have chosen the vacuum cleaner. The idea is that mydesign will serve as an eye opener and demonstrate that there are alternativesto today?s homogeneous market.The result is three vacuum cleaners claiming three alternatives to currentofferings.

This study is essentially based on my own questions concerning contemporary playgrounds. Why are they so unimaginative? What do the children say about them? Is it possible to create playgrounds less constructed, and with more natural elements? This report starts with references to literature studies, personal references and my personal view, and ends with a suggestion for a physical solution for an actual day care centre. The aim is to learn more about how the natural environment affects children, the importance of playing, and try to use this knowledge in a design of a day care centre. My main theme can be summarized in the following question: Why is natural elements in playgrounds considered to be healthy for children? I wanted to create a playground with natural characteristics which I myself would have appreciated as a child.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

This report presents the development process of a mobile interface for the C2-monitor. A monitoring tool used to support the operations for the broadcasting services of Ericsson Broadcasting and Media Services (EBMS). With the support of the C2-monitor, operators can monitor hundreds of channels and services produced from EBMS. To enhance a more flexible working environment, the C2-monitor needs to be developed further to support mobile devices with a customized design to take advantage of mobile phones features and functionality. Established and well-recognized design methods and principles have been applied in the development process and user testing have been made iteratively throughout the project.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.