The purpose of this essay is to examine when teachers choose to discuss mathematics withstudents rather then just talk about mathematics. A definition where used to distinguish betweenan interaction that is not a discussion and an interaction that is a discussion. This definition hasbeen created by drawing ideas from other works into making a quite simple definition whichtherefore is easy to observe. The discussions are also separated into two different kinds ofdiscussions. The first and most common category of discussion are one where only imitativereasoning is used.

This Master?s Thesis aims to illustrate in what ways the two Swedish environmental assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

To manage the industry?s need of wood assortments in a optimal and cost effective way the forest companies need to have knowledge of the actual standing volume and the yield of the planned clear cuts. The mean volume of the trunk is also important since it is important for the contractors prices. Today the total volume are estimated either with Näslund (1940) or Brandels (1990) functions of volumes, and the yield is estimated with Rune Ollas (1980) function for trunks and stands. The purpose of this study has been to answer the following questions: How good is the yield forecast with data collected with currently used methods? How well can the yield forecasts became with data collected according to the instructions? How well can the yield forecast be with data collected according to the instruction and calculated with the program Aptan for theoretical bucking? The study has been initiated and financed by SCA Skog AB.The material consisted of a number of randomly selected objects ready for clear cut.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Sweden?s forestry legislation was updated in 2010 and a new definition of forest land was introduced. This definition was adapted to the one used by the Food and Agriculture Organization of the United Nations (FAO) for international statistics on the state of the world's forests. It is in short based on the lands ability to grow forest that reaches 5 meters, 10 % canopy closure and has a continuous distribution, according to FAO at least 0.5 hectares. A country-wide laser scanning is now carried out for the production of a new national elevation model; the laser data also provides information on forest height and density.

The aim of this Master?s thesis is to investigate different ways of illustrating the information literacy of librarians and with a pragmatic view survey what has been written about marketing the librarians. The thesis is based on a marketing theory introduced by Philip Kotler. He believes that marketing is a social process and that everything can be marketed. I have reviewed three marketing strategies and their significance in marketing the information literacy of librarians.

This thesis is an investigation of Iranian immigrants and their use of libraries in Sweden. It isbased on a combination of a qualitative and a·quantitative method.Using a qualitative method, I give an outline of the history of lran from ancient times up to the present, as well as the different ethnological groups in Iran and their cultures. The main objective of this part is to clarify the contrasts between Iranian and Swedish cultural, social, linguistic and family structures, and also the characteristics of the crisis that most immigrants go through on their arrival in the new country. The qualitative method also involves structured telephone interviews with eight highly educated Iranians.This method was supplemented by a quantitative study through questionnaires of the attitudes· of lranian immigrants to libraries and reading. Iranians in Sweden turned out to be frequent Iibrary users.

This thesis is an investigation of Iranian immigrants and their use of libraries in Sweden. It isbased on a combination of a qualitative and a·quantitative method.Using a qualitative method, I give an outline of the history of lran from ancient times up to the present, as well as the different ethnological groups in Iran and their cultures. The main objective of this part is to clarify the contrasts between Iranian and Swedish cultural, social, linguistic and family structures, and also the characteristics of the crisis that most immigrants go through on their arrival in the new country. The qualitative method also involves structured telephone interviews with eight highly educated Iranians.This method was supplemented by a quantitative study through questionnaires of the attitudes· of lranian immigrants to libraries and reading. Iranians in Sweden turned out to be frequent Iibrary users.

In many biomedical contexts, e. g. when evaluating hearing disorders, the data obtained can be described as pairs (x1, y1), ?, (xn, yn) where x is a quantitative variable and y a 0/1 variable whose probability of taking the value 1 is a monotonic function of x. One way of analysing such data is to perform probit regression; thereby two parameters, b0 (= the constant) and b1 (= the slope) are estimated; the interest centres around m = -b0/b1, i.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

Asset management in insurance companies differs from conventional asset management to the extent that respect has to be taken to both assets and the commitments the insurance company has towards its customers. A model that has proven to fit well regarding the matching of assets and liabilities is the Asset Liability Management Model (ALM model). In addition to the matching in the balance sheet, the ALM model can be used in a company's work with strategic portfolio allocation by applying it as a basis for analyzing investment strategies with expected risk and return. From this, the ALM model also becomes relevant for calculating key figures according to the legal framework Solvens II which includes laws and regulations regarding the demands on economical strength (solvens) of insurance companies.Hence, the goal of this masters thesis has been to, on behalf of Bliwa Livförsäkring, create an ALM model to support the asset management department of Bliwa in their work with defining a credible way of analyzing the future risk and return of Bliwa's asset portfolio and insurance undertakings.The ALM model generally consist of four submodels, the scenario model, the liability model, the asset model and the company model, where the scenario model often is named as the core of the ALM model. The course of action has been to develop these submodels individually, with focus on the scenario model.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Ethanol for automotive purposes is an issue much debated and researchers disagree about the benefits of bioethanol. Converting energy-rich crops into ethanol suitable as motor fuel is a complex process and continuous development and improvements of processes and material used are important steps in the work of developing environmental friendly fuels. Grain is usually preserved by drying which consumes a lot of energy. Alternative storage of high-moisture grain in airtight storage systems reduce the energy required to produce bioethanol and studies have also shown that ethanol yields are increased more than 10% in ethanol fermentations of moist grain compared to dry. Airtight storage is often not perfectly airtight so biocontrol agents are necessary in order to preserve the grain.

Fusarium graminearum causes reduction in both yield and quality in cereal grain worldwide. One of the diseases it can cause is Fusarium Head Blight (FHB). Both sexually and asexually produced spores can infect living plants. Asexual conidia are produced in the mycelium while sexual ascospores form in asci in perithecia on debris. In biological control, living organsims are used to control pests and diseases.