This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The purpose of this study was to describe and analyze youth community service in the Kalmar municipality. Our focus was on juvenile offenders and predecessor of public authorities. The juvenile offenders in our study have completed youth community service. A qualitative study was undertaken which include seven interviews. Our empirical data were compared and analyzed with previous research data.

Today Holmen Skog finds and selects suitable thinning stands using data on upper height and basal area. These figures are often based on basic forest data that has been updated with the help of growth prediction models. The problem is that these figures are not always correct. The aim of this study was to investigate if a combination of data from a profiling laser and a digital camera for low elevation photography, can be used for collecting data on number of stems per ha, tree species mixture as well as basal area weighted mean height and upper height for stands. The possibility to use these data to assess the need for thinning cutting was also investigated.Laser data and aerial photographs were collected from a helicopter operating at an approximate height of 100 meters.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

"In the eye of the beholder- A didactic study of Swedish teachers and textbooks in history?s reasoning about nine eleven and its aftermath" by Emmy Johansson and Emma Svanström aims to show which picture both teachers and textbooks on elementary school and upper secondary school want to mediate on the subject. The study also strives to compare the teachers view with the textbooks.To achieve these goals the study uses materials from eight interviews and fifteen textbooks. The methods are a combination of interviews and textual analysis inspired by the scientist Elizabeth D. Herman.

Syftet med rapporten var att studera möjliga återvinningstekniker för Ragn-Sells. För detta användes litteratursökning och intervjuer. Återvinningstekniker som studerats är mekanisk bearbetning, mekanisk återvinning, kemisk återvinning och viskostillverkning. Flera underklasser till dessa metoder studerades också, liksom flera sätt att tillverka återvunna produkter. Rapporten nämner ett urval av återvinningstekniker och försöker inte nämna alla tillgängliga återvinningstekniker.Återvinningsteknikerna har sorterats enligt prioriteringen i EU:s återvinningsdirektiv (2008/98/EG).

The idea behind this project came from a feed study executed two years during the lambing season. Both years wool loss was experienced. Low temperature in combination with shearing was believed to cause the wool loss the first year, while protein deficiency was believed to be the cause the second year. In the literature many causes of wool loss are described; mechanical wear, telogen effluvium, bacterial dermatitis, external parasites, wool break, scrapie, genetic causes and nutritional deficiencies are some examples. The aim of this thesis was to study causes for wool loss and how common wool loss is in Swedish sheep herds.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

Background: The dependency on knowledge and competence today is more critical than earlier. Today, companies need to put more effort into identifying and filling knowledge gaps, which can be achieved through mergers and acquisitions. It is important that the companies succeed in coordinating their operations after this process of change. Out of a theoretical point of view it can be argued that companies need to balance between different coordination mechanisms that result in standardized and flexible coordination respectively. Purpose: The purpose of this Master Thesis is, in the context of a merger, to investigate and analyze which coordination mechanisms that are used in knowledge-intensive companies, how these coordination mechanisms are combined and what explains the chosen combination.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

The purpose of this work is to find out if the suctionvalve to the salivaejector for dental equipment in a simple way can be improved or if a new design is needed. The result of the examination of the suctionvalve shows that the friction between the piston and the seal is high and that this causes the valve in a few cases sheaves. The study concluded that only small changes in material or detail, improve the component..

The purpose with this thesis is to get a compilation of all the critical bolted joints of all enginesproduced at LV Motors. ABB LV Motors produces induction engines with seven shaft heights. Eachengine size exists several variants of components ex. standard shield and flange shield. Depending onwhich components the engine is equipped with arises various types of strains in the engine's parts,certain assembly ways are more favourable than other.The most critical parts in the engine from a mechanical point of view are the screw units betweenshield/stator, feet/stator and bearing cover/shield.