The report describes the thesis I, Philip Bergstrom, have done at the University of Gotland. The work comprises 15 credits and is at bachelor level and has been done in collaboration with Lyktan Bankeryd Belysning.The project consists of developing the design of a kitchen lamp for the Swedish home following the catchwords stripped French bistro that will fit into the Lyktan Bankeryd lighting spring collection 2013, and it should not look too alike any existing lamp on the market today.The work includes analysis of the company's current products and the image the company wants to project, analysis of three other companies' products to draw inspiration from, and a simple ergonomic study of the lights in the kitchen.The final result achieves the demands made and fits well in the intended environment, there is also the possibility for further development of both a floor lamp and a wall lamp..

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.

Outside of many Swedish households today, you will find a typical green wastecontainer. This container has not changed since its introduction, despitecomplaints about foul-smelling and its impractical system. Even if the system usedtoday, still is the most optimal choice, there is a lot of newly developedalternatives out there.Its purpose is to get a broader perspective on how a waste management systemcan be developed into a working, land efficiently and aesthetically pleasing systemof humans and the environment in a small residential area.The authors treat the residential area of Jära, Ekhagen, in Jönköping, which ismanaged by JM AB as a problem area in regards to waste management.The issues raised by the authors are the different waste management systems usedin the corresponding areas of the world, how to apply technical andenvironmental as well as the waste management facilities from financial aspects.In the process, the methods used were literature reviews, case studies and aninterview. The case study was done through a modeling of waste managementsystems in the area Jära and an interview was conducted with the company Envacworking with vacuum systems. Studies have been made by different systems n theareas around the world.The results show that using directives and guidance will reduce the environmentalimpact done without replacing the traditional system.

The foundation for a museum is the collection. To collect, preserve and display is what constitutes a museum. But the process of deciding which object´s should be saved, and which objects should not, are based on values. It is also values that make people inclined to donate objects to museums. How and why we value a museum determine if and why we donate.Objects themselves could be said to have a biography just like people.

Allanblackia is a genus of trees that grows in the rainforests of West, Central and Eastern Africa. Its big fruits contain seeds very rich in oil which has been used by local communities for cooking and making soaps. The native stands are threatened by overexploitation and the demand for the oil is much greater than the supply. Domestication programs, aiming at introducing the trees to small holder agroforestry systems, have been started for some of the species. The main aim of this study was to investigate the soil requirements of Allanblackia stuhlmannii in terms of chemical and physical parameters, as revealed by the soil conditions in native stands. Another aim was to see if these varied along an altitudinal transect.

This reports purpose is to give a general view on how to handle information collectedthrough photogrammetry and laser scanning with the help of UAS. The report ismade in collaboration with WSP Group and will briefly describe howphotogrammetry and laser scanning, also known as Lidar, works and how those areused in the construction business today. Then the focus will be on how gathered datais handled today, how outsourcing of data should be approached and if there are anyconsequences if data is handled in the wrong way. Interviews have been made with allparts in the UAS business. That includes authorities as Transporstyrelsen,Försvarsmakten.

A multivariate cross-sectional model is used in this thesis to proxy for expected earnings and to estimate return on equity for 214 companies over the period 2009-2013, using Swedish data. The model, which has never been tested on Swedish data before, is first confirmed to function as a forecasting model for expected return. Furthermore, the model is evaluated through a comparison with two univariate models based on the assumption that return on equity follows a mean reversion process. Forecast accuracy is calculated as the difference of estimated returns and actual returns. The results show that the univariate models' forecasts are superior to the multivariate model's..

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

ABSTRACTIntroduction: An increasing number of patients in Sweden receive epidural anaesthesia (EDA) in connection to surgery. Caring for patients with acute pain is a responsibility that is strongly established within the profession of the nurse anaesthetist. If the care provided by the nurse anaesthetist for patients who receive epidural anaesthesia is to evolve then further insight and knowledge is required regarding the individual´s experience.Aim: To describe patients' experiences in receiving epidural anaesthesia based on an earlier perioperative start-up of the EDA.Method: Based on a qualitative approach, the aim is to conduct semi-structured interviews with patients who receive EDA in connection to abdominal or gynaecological surgery. Research subjects' statements in the context of the interviews will be transcribed and then analysed using qualitative content analysis. In order to evaluate the chosen method regarding data collection and analysis model an exploratory pilot study was conducted.

This report covers the thesis done by mechanical engineering at the engineering program at the University of Halmstad. Student Work Development of packaging in the food industry includes 15 credits and has performed over 20 weeks in spring 2009. The thesis work is a compulsory part of education and aimed at the student must apply the knowledge it has given during training in a project related to reality. Student work has been carried out in cooperation with Hanson & Möhringen AB and the project's main objective was to develop an environmentally friendly packaging to their brand Falk Salt. When salt is one of the world's cheapest commodity was packing all the costs have to be as low as possible.

This study has been carried out in cooperation with Unilever and partly with the EC founded project, Smartdoc IST-2000-28137. In areas of statistics and image processing, both the amount of data and the dimensions are increasing rapidly and an interactive visualization tool that lets the user perform real-time analysis can save valuable time. Real-time cropping and drill-down considerably facilitate the analysis process and yield more accurate decisions. In the Smartdoc project, there has been a request for a component used for smart filtering in multidimensional data sets. As the Smartdoc project aims to develop smart, interactive components to be used on low-end systems, the implementation of the self-organizing map algorithm proposes which dimensions to visualize.

A helicopter based system equipped with a millimetre-wave fire control radar is studied for improvement of the detection probability for moving ground targets. The system is a pulse doppler radar that sends out the electromagnetic wave in repetitive pulses. The frequency in which radar sends this pulse is called Pulse Repetition Frequency (PRF). The velocity of the moving targets is measured by spectral analysis of the pulses received. With this sort of system some targets will not be possible to detect.

Bakgrund: Många av patienterna på en neurointensivvårdsavdelning (NIVA) vårdas med respirator under en längre eller kortare period av vårdtiden. Neurointensivvårdspatienterna bedöms ibland utifrån de kriterier för urträning och extubering som används på allmänna intensivvårdspatienter. Detta kan leda till för tidig extubation med reintubation som följd. Syfte: Redogöra för vilka kriterier som ska bedömas hos neurointensivvårdspatienter inför en extubering. Metod: Litteraturstudie.

För att företag skall kunna konkurrera på ständigt föränderliga marknader krävs att de har kunskap om exempelvis kundbehov, konkurrenter och nya produkter. Källor till denna kunskap finns både internt inom organisationer och externt i deras omgivning. Både de interna och externa kunskapskällorna är viktiga, men under de senaste åren har ett allt större intresse riktats mot de externa källorna, då de har blivit allt viktigare för att organisationer effektivt skall kunna hantera sina affärsprocesser.En av de kunskapskällorna som ofta nämnts är Internet och den data som lagras på hemsidor runt om i världen. Dock är det svårt att hitta relevant data på Internet på grund av dess omfattning och dynamiska karaktär. Det har därför börjat uppkomma nya tekniker för att inhämta, strukturera och integrera data från Internet.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.