The Vaxholm conflict was initiated when the Swedish Trade Union for Construction Workers shut down a construction site in order to prevent a Latvian construction company to build a school after the two parties had failed to agree upon a collective agreement in compliance with Swedish regulations. An emotional public debate followed that resulted in a discussion of the proposal for the Services Directive of the EU, based upon the country-of-origin principle. In this thesis we will analyze whether the country-of-origin principle or the country-of-destination principle is best suited to capture the gains-of-trade that the common market hoards and improve welfare within the EU. We conclude that the country-of-origin principle is the more apt of the two, though it leads to some short-run costs such as structural unemployment. But these will be more than outweighed by the gains in aggregate welfare for the EU in the long run..

The aim of this thesis is to examine the fear of crime in old peoples lives. Notwithstanding that the age category is exposed to crime to a low degree, old people are experiencing a great fear of crime relative younger people. This is the paradox of fear, also recognized in gender studies. The question is how this paradox can be understood. To answer this, twelve elderly men and women have been interviewed and the reports about crime in the local newspaper, Norrköpings Tidningar, has been analyzed, through discourse analysis.The discursive construction of fear is here discussed in terms of discourses of a fearful society, and stereotypes of old age.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Background: The real estate market has previously been subsidized by the government. The construction has been characterized by standardization and large scale complex. In the current situation there are other conditions on the real estate market, subsidies do not occur at the same degree and the market is more competitive. Customer influence has also changed. Today the customers want to customize their apartment by personal needs and lifestyle.

Background: The real estate market has previously been subsidized by the government. The construction has been characterized by standardization and large scale complex. In the current situation there are other conditions on the real estate market, subsidies do not occur at the same degree and the market is more competitive. Customer influence has also changed. Today the customers want to customize their apartment by personal needs and lifestyle.

This report, written by Ma?ns Ridze?n and Jonas Stenberg, presents the thesis carried out the spring of 2012. The authors met the first time in 2008, when they started their studies at Uppsala University. Since then they have completed various projects, both within and without the university. This study is based on a theory that was first conceived when Jonas Stenberg did his internship in the summer of 2010.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Background: Studies that have been made in male-dominated organisations shows that only few women have succeeded in advancing to the higher positions in all businesses. Statistics shows that merely 4 % of the managers in all building companies are female. The manager role has earlier always been classified as most suitable for men resulting in barriers for women who strive for management positions. This problem is now very renowned and is called the glass ceiling. To improve the current situation, both the organization's structure and culture, have to be modernized for more women to succeed and get the courage to get into the industry.

This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

Fall accidents are a big problem in the construction industry today and stand forapproximately 23% of all accidents. Skanska is a construction company that has avision toachieve zero accidents. Eliminating fall accidents is one step on the way towards theirvision. The state of Skanskas fall safety has been analyzed in this thesis to show whichimprovements are possible in fall safety.A literature study has been performed in which Arbetsmiljöverkets (The Swedishwork environment authority?s) laws and rules, together with Skanskas own rules havebeen studied.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

The purpose of this work is to find out if the suctionvalve to the salivaejector for dental equipment in a simple way can be improved or if a new design is needed. The result of the examination of the suctionvalve shows that the friction between the piston and the seal is high and that this causes the valve in a few cases sheaves. The study concluded that only small changes in material or detail, improve the component..

In order to accomplish that a construction is correctly built, it is critical to obtain a well functioning control mechanism throughout the project. The way to enable this is not by having an independent inspector constantly at your side. Today it is praxis to use check lists and have people responsible of quality to make sure that these are followed. This is where discretionary inspections play their part. These among others are documents needed to com-plete the check list.

A prerequisite of an international exchange of information is multilingual tools for information retrieval, such as the multilingual thesaurus. There is an ongoing discussion about the construction of, and the guidelines for, multilingual thesauri. In recent years the praxis as defined in ISO 5964 Guidelines for the establishment and development of multilingual thesauri 1985 has been the topic of a scientific discussion. It has been about how equivalence across languages is to be established when it comes to concepts, terms and relational structures. This masters thesis treats the praxis and practice of multilingual thesaurus construction.