AbstractObjective: The aim of this study was to investigate the statistical properties of a self-assessment instrument for depression, Känsloläge, with regard to validity, reliability and factor structure. Method: The data collection method used for the study was mail questionnaires. The sample consisted of patients who had received treatment for heart failure, arrhythmic disorders or coronary heart disease at a hospital in Uppsala, Sweden. The study population consisted of 53 patients. The self assessment form?s validity was analyzed by measuring the criterion validity.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

During consultation procedures between forest owners and the Sámi, data on, e.g., reindeer lichen biomass on the current site is needed. Hitherto, the existing methods of measuring lichen cover and biomass has been either objective methods such as the Point Intercept method, which is time consuming, or some sort of subjective visual estimation, which is faster but less accurate. However, both these methods are sensitive to different observers and/or to different inventories. This paper addresses the further development and evaluation of a photographical inventory method that uses colour distribution in images to estimate lichen biomass. During the autumn of 2011 six different locations, with different grazing pressure and lichen cover, in Norrbotten county were inventoried using both the Point Intercept method and the photographical method, complemented with collection of biomass samples.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

The project group is participating in a measuring project that is a cooperation between CIT EnergyManagement AB, the Measuring unit of Chalmers and College of Dalarna.The results from the measurementswill be put together and presented in a brochure.When designing the brochure a great deal of planning has been made how to attract the targetgroup.To make the contents of the brochure more attractive, which mainly will contain text, a lot of imageswith a symbolic substance have been used. To keep the brochure together it has been divided into fivechapters that each has been given one specific colour. The colours are consistent on initials, headlinesand images.At the moment the results of the measurements are not yet ready and the text for the brochure is notpossible to complete now. This project is expected to finish in the fall when all the measurements havebeen compiled..

Control and comparison of various cleaning methods on restaurants in Södra RoslagenThe purpose of this report is to find out and analyze the efficiency of cleaning methods in restaurant kitchens. The investigation was carried out through unannounced inspections at 89 restaurants in Södra Roslagen (municipality of Danderyd, Täby and Vaxholm). ATP-measuring was done on a plate, a knife, a bench surface and a cutting board. The ATP-method measured the amount of food residue on equipment and working surfaces after cleaning, with a luminometer and swabs. Restaurant staffs were asked to describe in detail how and when the last cleaning was carried out on the surface.

This report evaluates various methods that can be used to position a smartphone running the Android platform, without the use of any special hardware or infrastructure and in conditions where GPS is unavailable or unreliable; such as indoors. Furthermore, it covers the implementation of such a system with the use of a deterministic fingerprinting method that is reasonably device independent, a method which involves measuring a series of reference points, called fingerprints, in an area and using those to locate the user.The project was carried on behalf of Sigma, a Swedish software consulting company..

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Clopidogrel is an antiplatelet substance that prevents blood coagulation in the arteries. It is an inactive pro drug that becomes activated after first-pass metabolism by the liver. The active metabolite of clopidogrel is 2-oxoclopidogrel, which is unstable therefore pharmacokinetic data is obtained by measuring the inactive metabolite clopidogrel acid in plasma. Clopidogrel is taken orally in tablet form. The aim of this project was to develop a LC-MS/MS method for quantification of clopidogrel and its metabolite in plasma. The method has been developed by optimizing the sample preparation.

From embankment dams is something that has long been noticed and given rise to different questions. The most serious question is if the sludge is a result of inner erosion through the dam, and thus consists of material transported from the dam. Concerns have also been raised whether the sludge could interfere with the systems drainage capacity and thereby lead to high pore pressure in the dam, or if the measurement of seepage is disturbed, as the measuring is usually made via Thomson weirs, which could risk being blocked. The result of this investigation shows that the sludge is a result of the oxidation of iron by iron bacteria, and to the greater part consists of these oxides as well as the bacteria?s own structures. The iron oxidizing bacteria, FeOB, oxides ferrous iron to ferric as a part of their metabolism, and thereby create large quantities of iron(oxy)hydroxides.

New method for measuring road quality- A statisticalstudy of the relationship between road quality andsocioeconomic development A new tool with implications for road maintenance has the potential to yield statistical data for road quality in a large number of regions. This thesis investigates the possibility to develop a method, from this data, for evaluating the effects of road quality on socioeconomic development.The thesis is essentially divided into two parts. Part one looks to qualitatively establish the link between socioeconomic development and road quality and the second part focuses on how to develop a method for evaluating the effects of road quality on socioeconomic development. A method was devised using categorical data and a multinomial regression model. This method provides a comprehensive overview of the complex relationship between a variety of different variables.

The master thesis, conducted at Metrima AB, concerns the development of a non-intrusivedistribution meter as a basis for individual tap water billing in apartments.The project is conducted in response to the market interest in individual tap water billing inapartments as an answer to environmental concerns regarding water consumption. Due to thehigh installation cost of traditional water meters, a new method of determining waterconsumption, without having to cut water pipes, is proposed.The proposed method distributes the total water consumption for an apartment complex toindividual apartments according to distribution meters, measuring water run-time, in eachapartment. The water run-time is estimated by measuring the water pipe?s outward vibrationsand temperature changes.A test environment was established and a prototype built, using a tilt- and vibration sensor forvibration sensing and a precision temperature sensor to measure temperature changes. As bothsensors work well in the test environment, further testing was done in 3 apartments for aduration of 5 days.

The moisture content in 10 deliveries of tree parts and 10 deliveries of wood residues were measured with different methods to analyze the quality of procedure used at Dåvamyran today. At the same time a survey was made on the measure procedures used at heating plants in Sweden The majority of the heating plants in Sweden use weight and moisture content as base for payment but at some plants only volume. The moisture content is usually estimated by drying wood chips in an oven but few plants a visual estimation is used. At few plants moisture content is estimated spectroscopicily. The techniques using near infra read light and other electromagnetic are still at a test stage. The methods of measurement used today are quit unreliable for the individual deliveries and there is a risk for systematic mistakes.

This report tested the possibility of using induction as a mean for transferring data and power so that it can be implemented as a communication medium between a terminal and measuring head mounted in a measuring frame. This would eliminate the need for the cable bunches that are used today. For testing, signal generators were used to generateFSK-signals and were transferred with the help of inductors to the oscilloscope for signal detection, this to see how the coils used in the tests behaved. Simulations of a PLL were performed to see how good it could handle FSK-demodulation. With the help of a PLL IC and the simulations a working FSK-demodulator could be assembled.