This study investigates augmented reality using third person perspective and what precision can be achieved by using this method. There have been prior studies in regards to precision using augmented reality, however studies using third person perspective is scarce. This study presents a solution using a static camera capturing the user as well as the plane to augment from behind. This augmented image is then transferred to a handheld device that is held by the user. Using this method the user will be free to manipulate and work with the plane without removing the device that captures the scene, a common problem when using visual reference markers in augmented reality.

On a highly competitive market, quality is an important aspect to take into account, both in terms of goods and services. The Swedish timber market is very competitive and to achieve long-term success focus on the customer, in this case private forest owners, is a prerequisite. SCA Skog AB Jämtlands forest management administration is dependent on the acquisition of timber from private forest owners to fulfil their mission to the supply of SCA's paper and sawmills in Sweden with raw material. To be able to develop the cooperation with private forest owners, the administration investigates their quality management by measuring the customer satisfaction index (CSI). The purpose of the study was to identify a practical and systematic method to handle deviations and suggestions for improvements to achieve a higher customer satisfaction.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER). An improvement is only seen when the BER becomes much lower than what is common in real situations. In conclusion DDCE is complicated, involves many mathematical operations and gives insignificant improvement of SNR when BER takes common values. It is legitimate to question if it is possible to use the method in a real mobile phone system..

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

This master?s thesis is a remote sensing study of an area-based method used to detect forest in need of thinning by use of laser data and field samples. Only pine-dominated forest has been included in the study and height limits were set to match empirical restrictions. The study area was in the municipality of Älvsbyn (Latitude 65° 40´ N, Longitude 21° 00´ E), in northern Sweden.The Swedish authority Lantmäteriet is currently laser scanning most parts of Sweden, providing new opportunities and applications. The primary aim of the national laser scanning is to create a new elevation model, useful in consequence analysis of climate changes.

Previous research on Twitter use among nonprofit organizations has been centered on the US, thisessay Nonprofits on Twitter: a content analysis of Swedish nonprofits working for gender equalityseeks to expand that research to include nonprofit organizations operating in Sweden. By studying tenSwedish nonprofits all working to achieve gender equality this study can begin filling a gap in theexisting research. Focusing on both what kind of messages the organizations publish, and what kind ofmessages engage the organizations? followers. This is achieved by quantitative content analysis:categorizing messages into the categories Information, Community and Action, and measuring whichof these categories got the most shares, comments and likes.

Purpose/Aim: The aim of this study is to (1) analyze the amount of exposure disability sports get in Swedens biggest newspaper (Aftonbladet), (2) look at how Aftonbladet portraits disability sports and it?s athletes, and finally (3)  to see if there has occurred any change over time (during the last eight years). Material/Method: The first method used is a quantitative analysis to measure exposure.The second method is a quantitative content analysis which is used to analyze how disability sports are portrait.The third method is rhetorical and is also used to analyze how disability sports are portrayed. Main results: The study has shown that disability sports get very little exposure in Aftonbladet. The articles in the newspaper that cover disability sports are portrayed from a personal point of view without much focus on the athletes achievements regarding his or her sport.

On a highly competitive market, quality is an important aspect to take into account, both in terms of goods and services. The Swedish timber market is very competitive and to achieve long-term success focus on the customer, in this case private forest owners, is a prerequisite. SCA Skog AB Jämtlands forest management administration is dependent on the acquisition of timber from private forest owners to fulfil their mission to the supply of SCA's paper and sawmills in Sweden with raw material. To be able to develop the cooperation with private forest owners, the administration investigates their quality management by measuring the customer satisfaction index (CSI). The purpose of the study was to identify a practical and systematic method to handle deviations and suggestions for improvements to achieve a higher customer satisfaction.

Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.

This study was conducted in the Master program at The Music Pedagogical Center (MPC) at The Royal College of Music in Stockholm. Korta musikresor (Short Music Journeys) is the Swedish term used for a receptive method of music therapy adapted from the tradition of The Bonny Method of Guided Imagery and Music (BMGIM) and the theory and practice of Expressive Arts Therapy. The KMR method uses carefully selected short pieces of music, lasting between 2 and 5 minutes, to work on various psychological problems and life- crises. The music session is conducted in a slightly altered state of consciousness with a clear focus being established beforehand in a verbal dialogue with the psychotherapist. There is also the possibility of using artwork to process and explore the imagery after the music listening.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

I studien har jag ställt frågorna; vad är masskommunikation och hur kan den beskrivas? Vilken väg transporteras en händelse i massmedias infrastruktur? Ambitionen är att undersöka hur masskommunikationen fungerar, därför har tre specifika händelser valts ut för att studeras. Teoretiskt utgår studien ifrån ett mediefilosofiskt synsätt i en postmodern tradition med medieteori av McLuhan, Baudrillard och Bourdieu. Undersökningen har genomförts med kvalitativ fallstudie. Tre händelser har identifierats och kategoriserats i empirisk, definitiv och producerad händelse.

This study was conducted in the Master program at The Music Pedagogical Center (MPC) at The Royal College of Music in Stockholm. Korta musikresor (Short Music Journeys) is the Swedish term used for a receptive method of music therapy adapted from the tradition of The Bonny Method of Guided Imagery and Music (BMGIM) and the theory and practice of Expressive Arts Therapy. The KMR method uses carefully selected short pieces of music, lasting between 2 and 5 minutes, to work on various psychological problems and life- crises. The music session is conducted in a slightly altered state of consciousness with a clear focus being established beforehand in a verbal dialogue with the psychotherapist. There is also the possibility of using artwork to process and explore the imagery after the music listening.

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.

The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.