Sök:

Sökresultat:

4394 Uppsatser om Measuring Methods - Sida 4 av 293

Tracheas dimension hos Engelsk Bulldog : en retrospektiv radiologisk pilotstudie på svenska hundar

There is desire to evaluate the tracheal diameter in the Swedish population of English Bulldog, a breed with breathing disorders, and if possible use it as a criteria for breeding in the hope of improving the life situation for these dogs. The Swedish Kennel Club has together with the Swedish Club for English Bulldog and veterinarians presented a five year radiological study that has the purpose to give an average look on how the tracheal situation is in the population. The trachea will be evaluated through two different methods, both measuring two distances in the thorax. The first one compares the tracheal diameter to the height of the cranial opening of the thorax, and the second one to the width of the third rib. With the measured distances one will calculate a quotient and compares it to the reference values.This study is designed to get a preliminary evaluation, based on the 65 dogs that were available on the time for the study, with measurements done by two persons on three different occasions each.

Navigering, sensorfusion och styrning för autonom markfarkost

The aim of the Master?s Thesis work is to study and develop algorithms for autonomous travel of a UGV (Unmanned Ground Vehicle). A vehicle for the mounting of sensors has been constructed in order to perform the work. Since the UGV is to be used outdoor in urban areas, GPS can be used. To improve precision and robustness, inertial navigation is used in addition to GPS, since GPS reception is likely to be diminished in such areas.

Ur led är tiden: En studie av metoder att korta ledtider inom forskning och utveckling

Product development cycles become shorter and shorter. The time from idea to market has become an important competitive factor. Despite this, methods used for making the product development process faster are surrounded with uncertainty about their efficiency. The purpose of the thesis is to describe the pros and cons of ?best practice? methods for shortening lead times and how these methods effect the lead times in research and development.

Överföring av elektrisk signal och effekt med magnetisk induktion.

This report tested the possibility of using induction as a mean for transferring data and power so that it can be implemented as a communication medium between a terminal and measuring head mounted in a measuring frame. This would eliminate the need for the cable bunches that are used today. For testing, signal generators were used to generateFSK-signals and were transferred with the help of inductors to the oscilloscope for signal detection, this to see how the coils used in the tests behaved. Simulations of a PLL were performed to see how good it could handle FSK-demodulation. With the help of a PLL IC and the simulations a working FSK-demodulator could be assembled.

Språkinlärning och Språkutveckling : I en förberedelseklass i högstadiet

Then the language learning process and the approach in a preparatory class differs itself from a general class. The methods conducted in a preparatory class are not just focused on teaching as in a more traditional method. Achieving the objectives in a preparatory class depends on the individual student and the cohesion in the group. Students have different backgrounds and knowledge level, therefore it is extremely important that the teachers use different work methods in order to achieve and to promote the students' language development. The aim with this survey is to get the knowledge about what education methods is being used by teachers in a preparatory class.

Val av teknik för hastighetsmätning i kallvalsverk

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

Konsekvenser av ny teknik på en sjukhusmottagning

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

SERVQUAL : ett lämpligt mätinstrument av upplevd tjänstekvalitet inom reseindustrin?

The travel agencies exist on a market that is distinguished by increasing competition. A majority of the travel agencies offer different services that all satisfie the same customer need. However,one major difference in the market aspect is the service quality, this making it an important mean of competition. There are several acknowledged methods of measurement when it comes to service quality and it is important to use an instrument that takes into consideration the fact that charter tours is a complex merger of several services. The purpose of this essay is to establish if the SERVQUAL method is a suitable instrument for measuring service quality in the travelindustry.

Underkambriska böljeslagsmärkens bildningsmiljö : Ett försök att fastställa fossila ripplars avsättningsmiljö med hjälp av recenta sandbottnar

ABSTRACTThe fauna of the Lower Cambrian is far from fully understood, as is the environment of that epoch. Some of the most crucial moments in the history of evolution takes place during this epoch; the Cambrian explosion and the appearance of ecosystems as we know them. That makes it an important period to investigate. Doing so, the Lower Cambrian offers a lot of problems, one of which is that body fossils are seldom preserved. That has often left us with trace fossils to create an image of the Lower Cambrian life, but also some bedrock features such as ripple marks.The main purpose of this work has been to investigate the possibilities of relating the wave lengths and forms of recent wave-generated ripples to fossil ones, and also to evaluate the methods for that kind of comparison.

En jämförande studie mellan kreatininkoncentration i serum och GFR mätt med scintigrafi hos hund med misstänkt kronisk njursjukdom

Both serum creatinine and measuring GFR can be used to evaluate renal function in dogs suspected to have chronic kidney disease (CKD). Although high creatinine levels usually indicate renal disease, normal creatinine levels can be present in dogs with decreased renal filtration. Measuring GFR is generally believed to be the most accurate way of detecting decreased renal filtration and scintigraphy GFR using 99mTc-DTPA has been found to correlate well with the ?gold standard? inulin clearance method.When measuring GFR by scintigraphy, 99mTc-DTPA is injected intravenously and radioactive decay of technetium gives rise to gamma radiation, which is registered by a gamma camera. Pictures and curves of radioactivity in the kidneys are generated by means of a computer program.

ISO 9001 : En fallstudie om hur de ständiga förbättringarna, som är införda i företagets verksamhetssystem, är anpassade efter medarbetarna

MPC is the company Exova Metech?s operating system that contains all the information needed for the company's objectives and guidelines to permeate the company. How changes in the MPC should be communicated with the company's employees can be seen as problematic. Routines that have been changed in practice, the process owners do not always update in the MPC, it leads to that the employees can not ensure that duties are performed properly. It is therefore important that management takes its responsibility by providing updated information.

Rehabiliteringsmetoder för häst och hund :

Today, many veterinary hospitals offer rehabilitation as a service. We think that this is an interesting subject and therefore we want to find out what rehabilitation methods that are available in Sweden for dogs and horses. We want to give animal nurses and other persons who have animals as an occupation an survey that shortly describes how the methods are performed, what physical effect they have in the body and to give examples in what conditions they are used. To find out what rehabilitation methods that are available we sent out two different questionnaires, one to hospitals/clinics for small animals and one to hospitals/clinics for horses and other companies that works with rehabilitation of horses. The information about the methods described in our project we have found in literature and on the Internet.

Metoder för att undersöka effekterna av naturvårdshänsynen i skogsbruket efter den nya skogsvårdslagen

In 1994 a new Forestry Act was accepted in Sweden. One of its aims was to raise the consideration for preservation of biodiversity. Since this happened over 15 years ago there is now an interest in analyzing if the law has been effective in its purpose. In this study methods suitable for analysis are being investigated. The study contents a pilot study of methods for five parameters that can validate if the law has been followed.

Den kamoflerade värdegrunden : En undersökning om hur värdegrunden i Lpo 94 visar sig i fyra ungdomsromaner

Then the language learning process and the approach in a preparatory class differs itself from a general class. The methods conducted in a preparatory class are not just focused on teaching as in a more traditional method. Achieving the objectives in a preparatory class depends on the individual student and the cohesion in the group. Students have different backgrounds and knowledge level, therefore it is extremely important that the teachers use different work methods in order to achieve and to promote the students' language development. The aim with this survey is to get the knowledge about what education methods is being used by teachers in a preparatory class.

Vägledningsmetoder? Ja, tack! Nej, tack! : Om användninga av vägledningsmetoder av yrkesverksamma studie- och yrkesvägledare

The overall aim of this study is to achieve the increased knowledge of the use of the counselling methods in the student counsellors' work and to find the possibilities for development. Two questions are used as guidelines:Which counselling methods do student counsellors use in their work in schools?How can the current education for the student counsellors be supplemented?The analysis of the interviews with six counsellors in Stockholm's administrative province showed that even uneducated counsellors use the same counselling methods as the educated ones. All these methods which are used remind of the known counselling methods that are the part of the current education for the student counsellors.In general counsellors experienced that the education for the counsellors should be supplemented within the field children with special needs and that conversation's methodology is the essence of the counselling work..

<- Föregående sida 4 Nästa sida ->