Periods of hypoxia are a recurring issue in Brunnsviken. Main factors that trigger hypoxia in Brunnsviken are eutrophication  due to anthropogenic emission of nutrients, stratification in the water column due to salinity and temperature differences  that prevents mixing and a sill inlet that prevents water exchange. As an attempt to improve the oxygen levels, bottom water is pumped from Brunnsviken causing aerated surface water to flow back into the basin.  The objective of this Master?s thesis was to study the change in dissolved oxygen levels due to pumping.

During the late twentieth century, political and societal changes gave rise to an increased interest in performance evaluation in public organizations. This development also affected libraries in the public sector. The main concern for this master thesis is performance measurement in libraries. In this study two different types of libraries are investigated, one public and the other academic. My aim is to find out if and how performance measurement appears in the libraries annual activity reports.

The third most common conifer in Sweden is Pinus contorta (lodgepole pine). It originates from the western part of North America and was brought here in the end of the 1920s. The lodgepole pine is today allowed for commercial plantations in central and northern Sweden, excluding high altitude locations. Since 1979 only plantations with scientific purpose are allowed in south-central and south Sweden. This document is focused on how lodgepole pine manage perform compared with Pinus sylvestris (Scots pine) in the southernmost part of Sweden, Götaland. The idea came from the fact that the Swedish government is evaluating a notification from the National Forest Agency that suggests lodgepole pine to be allowed for commercial plantation even in southern Sweden.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The Measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the Measurements where later used to study the capability.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

Purpose: To examine the hearing environment for tattoo artists regarding occupational noiseand to see whether tattoo artists are exposed to hazardous noise according to Swedish WorkEnvironment Authority regulations. Method: Using a dosimeter we measured a total ofseven sessions of approximately one hour on seven different subjects, located on five studiosin Gothenburg. As a complement we did also hand out surveys based on twelve questions toexamine habits, experienced sound environment and to see if there were any hearing relatedpatterns. Results:. Sound level Measurements showed that the lower exposure action valueLpAeq,8h 80 dB(A) in one case was reached if applied to the average working time of sixhours.

The purpose of this study was to increase the level of knowledge in the field of Environmental Impact Assessment (EIA) for wind power. The study includes six wind power farms in the County of Västerbotten in northern Sweden. The main questions were: What are the real dimensions of roadways and land claims for both roads and wind power turbines? How do those dimensions correlate with the dimensions stated in the EIA? Are there any differences in values of the dimensions between the wind power farms that are included in this study? The width of the roadways and the land claims for both roads and wind turbines in wind power farms were examined on site. The results from the examinations were compared with the dimensions available in the EIA for each wind power farm.

The Yara N-Tester is a handheld chlorophyll meter which can be used in several different crops as an aid to determine if there is a need of complementary fertilization with nitrogen (N) or not. If the crop requires more N the N-Tester will recommend an amount in kg per ha. The possibility to assess the need of N depends on the strong relation that exists between chlorophyll- and N-concentration in the leaves of plants. In the multiannual trial series ?Nitrogen to winter wheat at different soil conditions? Measurements with the N-Tester was carried out at flag leaf emergence (GS 37). In this work the result of Measurements, the NTesters ability to estimate the need of N in winter wheat, will be presented for the years 2008-2011.

Among the Indigenous cattle breeds in Indonesia, the Bali cattle is the most preferred by small farmers. The Bali cattle is a beef breed, and is considered to have several advantageous characteristics and to be well adapted to the country?s harsh environmental tropical conditions with drought and rain. The main aim of this project was to phenotype of Bali cattle from different locations in order to identify and document diversity within the Bali cattle breed based on their observable characteristics, to compare cattle from different areas and production systems to see the effect of management on phenotype. In this study, 107 cows and bulls of the breed Bali cattle, from Kalimantan, Sumatra, Lombok and Bali were phenotyped.

When a disaster occurs the main focus is on the loss of human lives. Here the environmental effects have been in the centre of attention. This work has had two main purposes. The first one was to formulate attributes, variables that together present a complete picture of the consequences that an event has had on the environment. The other main purpose was to investigate how people value the impact that a disaster can have on the environment.

A method for measuring the total impulse from a multi hole diesel injector, introduced inprevious thesis work, ?Development of a method and a device for measuring the momentumrate of fuel sprays?, by Mikael Lindström, has been further developed and tested. The conceptis to simultaneously deflect all sprays from a multi hole diesel injector by using a bell shapeddeflector. The fuel sprays are deflected straight down from their initial umbrella angle, andthe resulting deflection force is measured in a thin strained section of the load cell. The strainis given by three strain gauges, with quarter-bridge circuitry for each gauge.

The thesis aims to examine how companies optimize the human capital from a value creation perspective. The value creation will be related to transfer of knowledge, recruitment, staff turnover and development. The thesis has a deductive approach and six qualitative interviews have been conducted. The results from the interviews will be strengthened with a quantitative data analysis of two Measurements; value added per employee and human capital efficiency. The theoretical framework includes definitions of human capital.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.