High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.

The ability of a dog to perform some kind of practical work, for example hunting or herding, depends among other things on its behavioural characteristics. In animal breeding it is not always easy though to select for behavioural traits. It may, for example, be difficult to identify traits that are not only heritable but also of importance for the dogs' ability to perform the practical work of interest. Moreover, it is often difficult to accomplish accurate Measurements of behavioural traits. When selecting dogs for breeding, it is usually preferable to evaluate them using an objective and standardized bahavioural test, rather than results from field trials.

Modern milk production have come a long way when it comes to accommodating the nutritional and physiological needs of the animals, but unfortunately the behavioural and psychological needs of cows and heifers are often left unfulfilled. A long time for eating is beneficial for the digestion and also gives the cattle something to do and decreases the risks for developing abnormal behaviours. An important factor that influences eating- and ruminating time is the particle size of the roughage. The aim of the study was to find out if particle size influences the behaviour of dairy heifers, in particular with regard to eating behaviour and abnormal behaviours. The study was conducted at Uddetorp farm high school in Skara. Forty-two heifers of the breeds SR and SF were housed in 8 slatted floor pens.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

Övervikt och fetma har ökat lavinartat bland barn och ungdomar de senaste 25 åren. Fetma medför både fysiskt och psykiskt lidande för de drabbade barnen och de löper även en stor risk att drabbas av sjukdom i vuxen ålder. Prevention av övervikt och fetma är därför av högsta vikt. Forskning och olika studier kan bidra med utveckling av behandlingsmetoder, hitta nya orsaker och samband till varför fetma uppstår. Syftet med denna studie var att utvärdera om det finns samband mellan RQ-BMR (respiratorisk kvot, basalmetabolism), antropometriska mått och kroppssammansättning hos överviktiga barn och ungdomar i åldrarna 10-13 år.

This study was conducted at the University of Bath, UK, from September to December 2014 as part of an ongoing research project aimed at elucidating how the Grb10 gene might act as a mediator of long-term health effects (such as predisposition to obesity, diabetes, coronary heart disease and hypertension) caused by environmental factors during development. This phenomenon is known as developmental programming. The purpose of this thesis was not primarily to answer any of the broader questions posed by this research project at large since this would require much more data than is reasonable to acquire over the course of a few months, but rather to evaluate the methods used in this project and reveal whether they are working the way they are presumed to. In the research project, which employs mice with the Grb10 gene knocked out as well as wild-type control mice, a dietary restriction model is utilized during gestation, which is supposed to generate offspring with lower birth weight and subsequent detrimental health effects in adulthood. This is supposed to be achieved by restricting the protein content of the pregnant mothers? diet to 9 % (as opposed to the control diet of 20 %) throughout gestation.

It is important that the current urine separating systems are evaluated to allow improvements to be made and consequently increase their future propagation. In order to increase the knowledge about urine separating systems this study was made. It included, among other things, Measurements of amounts of urine as well as of the composition of urine collected at Nytorgsgatan 4 in the city of Hallsberg. The study was increased after an inquiry that also included the district of Understenshöjden in the city of Stockholm. In the inquiry, the users were asked questions about odour, cleaning of toilets and occurrence of blockages in the urine water locks etc.

This degree project studied surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

Bakgrund: Denna litteraturstudie handlar om avnavling och när det är optimalt att avnavla det fullgångna friska barnet. Avnavling har länge varit ett diskuterat ämne bland obstetriker, barnmorskor och föräldrar. Föreliggande studie ska bidra till att öka barnmorskans och övrig vårdpersonals medvetenhet om när avnavling bör ske och när det är fördelaktigt för barnet att avnavlas. Rekommendationen är att friska fullgångna barn avnavlas sent om inte situationen kräver en tidig avnavling eller att föräldrarna önskar tidig avnavling pga. donation till biobanken.

A good power quality can be an important prerequisite to achieve a sustainable society. Scandinavia's electrical system is in many respects superior, and Sweden has a fossil free electricity generation at 97 % and a reliability of electricity distribution at 99.98 %. Meanwhile, the EU has an ambition to expand the electricity market in order to achieve a joint trading business across Europe. This cross-border market will result in a large proportion of fossil energy sources integrated into our electrical system, which also leads to an increased need for renewable electricity production in Sweden. One part of this development is to increase the share of renewable micro generation that is locally or regionally connected to the power grid.

AbstractIntroduction: Hand Arm Risk Assessment Method (HARM) is a tool to assess the risks of deve­lo­ping complaints of the arm, neck or shoulders during manual work. The method was developed in the Netherlands primarily for employers, but is also used as an aid to work environment in­spec­tors. The purpose of this study was to evaluate the HARM-method for assessment of biomecha­nical exposure of the upper limbs when performing manual tasks as well as its suitability to be used within work environment inspection. Methods: Ten labour inspectors conducted assessments of five video-recorded work tasks. Assess­ments made with HARM were compared with those made with the Assessment of Re­pe­titive Tasks (ART) tool and with ACGIH Hand Actvity Level (HAL) - both methods for assess­ment of bio­mecha­nical exposure of the upper limbs - and with the model for the assessment of re­pe­titive work in the pro­visions of the Swedish Work Environ­ment Autho­rity on ergonomics for the prevention of mus­culo­skeletal disorders, AFS 1998:1.

Magnetic resonance imaging (MRI) has the potential to be used for the diagnosis and study of osteoarthrosis in the equine tarsal region. In the development of new diagnostic MRI techniques cadaver specimens are often used. To allow the use of cadaver legs for these types of studies it is important to know the effect of time after death on the MRI image. Since the relaxation times are temperature dependent, it is interesting to examine whether the time after death and the temperature of the cadaver may play a role in the image appearance and quality. The radio pulse sequences that show the different types of tissues are also important to know when pathological evaluation with MRI is used.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

Magnetic resonance imaging (MRI) has the potential to be used for the diagnosis and study of osteoarthrosis in the equine tarsal region. In the development of new diagnostic MRI techniques cadaver specimens are often used. To allow the use of cadaver legs for these types of studies it is important to know the effect of time after death on the MRI image. Since the relaxation times are temperature dependent, it is interesting to examine whether the time after death and the temperature of the cadaver may play a role in the image appearance and quality. The radio pulse sequences that show the different types of tissues are also important to know when pathological evaluation with MRI is used.