The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

Under utbildningen till Studie- och yrkesvägledare kom vi att upptäcka hur intressetester av olika slag blivit ett allt populärare sätt att skaffa sig förslag på lämpliga studie- och yrkesval. Intressetester används av verksamma vägledare inom både skola och arbetsförmedling. Internet är vårt främsta informationsanskaffningsmedel och används alltmer inom vår bransch. Syftet med denna studie är att undersöka elevers attityd till intressetester. Framförallt undersöka om dessa tester genererar i en ökad kunskapsproduktion och om den kunskapen då är giltig.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

The development in photogrammetry has created possibilities for new methods in aerial images acquisition. Remotely-controlled imaging from an unmanned helium zeppelin is a new and relatively unexplored acquisition. The purpose with this degree project is to evaluate the accuracy of this kind of low-height photographing system, a task given from the consultant company WSP, in Sweden. Landbadet in Uddevalla municipality was chosen as a test field for the zeppelin. Seventeen images distributed over three strips were acquired from the flying height of 80 m.

The Swedish Transport Administration has, and manages, a database containing information of the status of road condition on all paved and governmental operated Swedish roads. The purpose of the database is to support the Pavement Management System (PMS). The PMS is used to identify sections of roads where there is a need for treatment, how to allocate resources and to get a general picture of the state of the road network condition. All major treatments should be reported which has not always been done.The road condition is measured using a number of indicators on e.g. the roads unevenness.

ObjectiveThe objective of this study was to investigate the clinical application to use ASSR in anesthetized childrenDesignOne main ambition of the investigation was to compare hearing threshold using ABR with estimated hearing threshold using ASSR. Another aim was to examine if the duration of an ASSR measurement could be reduced by only using the frequencies 1, 2 and 4 kHz and exclude the frequency 0.5 kHz. This is a retrospective study using electrophysiological measurement from a database.ResultResults showed a high correlation between hearing threshold using ABR and estimated thresholds using ASSR, with the frequency 0.5 kHz showing a slightly lower correlation. Result also showed that the test duration was increased when using all test frequencies in ASSR-measurement compared to when 0.5kHz was excluded. ConclusionThe study showed a high correlation when comparing hearing threshold using ABR and ASSR.

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

During later years coaching has gained popularity. Coaching offers help to learn rather than to teach and enables optimal performance. The method that builds consciousness, strengthens choices and leads to change in the wanted direction, can deduce to some of history's most successful educationalists. A coaching area steadily increasing is business- and executive coaching. The overall purpose with this paper is to explain what coaching is generally speaking, with specific focus on business- and executive coaching.

Ett ökat brukande av skog enligt skötselprinciper som leder till skiktade beståndsstrukturer, en blandad trädslagssammansättning och kontinuerligt skogbeklädd mark har potential att öka den biologiska mångfalden och värdet för rekreation (Emborg m.fl. 2000, Berg m.fl. 1995, Mattsson & Li 1994, Holgen m.fl. 2000). I ljuset av detta, tillsammans med svårigheterna som finns att nå goda ekonomiska resultat vid skötsel av ädellövskog (Lindén & Ekö 2002), ses det idag som angeläget att uppmärksamma och studera alternativa skogsskötselmetoder (Cedergren 2008) . I östra Blekinge har ett antal skogsägare under längre tid praktiserat en metod att sköta naturligt föryngrad ek i blandbestånd som går ut på att, mer eller mindre tidigt, frihugga ekhuvudstammar, och att dana kvalitet genom stamkvistning/beskärning.

At Flight and Systems test Saab AB, a post-processing software is used to process GPS data. A new software by the name GrafNav has been purchased and the purpose of this master thesis therefore became, partly to make a judgment regarding GrafNav?s ability to estimate position, velocity and accuracy, partly to if needed improve the estimate and finally find one or several methods to estimate the position and velocity accuracy. The judgment of GrafNav was performed partly by a comparison to the former post-processing software (PNAV) and partly by a comparison to the airplane?s inertial navigation system (INS).

Background Swedish nurses are required by law to document nursing care. Studies have proved scarce in nursing documentation with regard to written language, the nursing process and the nurse´s caring perspective. Educating nurses in using the VIPS model have improved nursing documentation. Few studies have included nursing documentation of psychiatric care.Aim The aim of this study was to describe nursing documentation within psychiatric care of inpatient settings.Method A quantitative, retrospective descriptive research design was applied. A total of 60 nursing journals from a psychiatric department of six wards were studied.

During the last decades the fertility of dairy cows has declined in the same rate as the milk yield has increased. This is a result of the negative genetic correlation between milk yield and fertility, failure to show estrous signs and metabolic problems in the cow. The purpose of this review was to investigate the function of metabolites and hormones as markers for disturbances in fertility, health and production in the dairy cow. There are several metabolites that are suggested to indicate the cow?s energy balance.

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

The report describes the process of identifying the interference that exists in a newly installed automated robotic cell and suggest improvements to increase productivity. The cell is used for lifting up extruded aluminum sections onto a conveyor which deliver the material to a anodising line at a company that manufactures aluminum extrusions.To find the areas with the best possibility for improvements in the cell we used a variety of job Measurements e.g. measure of standard times for each operation in the cell. The core of the report is a study of the robots.One reason for this study is that the robots do not reach the productivity they were purchased to. The main cause not reaching the productivity is the visionsystem.

To be able to handle tomorrows need for limited energy consumption we need to reduce our use of energy. The building sector stands for around 40 % of all energy consumption in the society. The government has put up a goal to reduce the energy consumption in our buildings with 20 % by year 2020 and 50 % by year 2050 compared with year 1995. To be able to do reach that goal we need a more energy efficient building stock.The main part of the energy used in our buildings is used for space heating. By installing ventilation systems with heat recovery on the exhaust air it is possible to use the heat-energy in the exhaust air to warm up the incoming air.