Digitizing objects and environments from real world has become an important part of creating realistic computer graphics. Through the use of structured lighting and laser time-of-flight Measurements the capturing of geometric models is now a common process. The result are visualizations where viewers gain new possibilities for both visual and intellectual experiences. This thesis presents the reconstruction of the Parthenon temple and its environment in Athens, Greece by using a 3D laser-scanning technique. In order to reconstruct a realistic model using 3D scanning techniques there are various phases in which the acquired datasets have to be processed.

Since the late 50th century, the automobile has been normative in the Swedish society (Lundin 2008). This has led to an urban environment deeply characterized by the motor vehicle and its necessities, while other means of transportation, such as train and bicycle, have been ignored and put aside. However, over the past decades, a new trend has been seen in urban planning as a consequence of the increasing knowledge of the negative qualities caused by the car. As a result, the bicycle is seen as a conceivable transport mode.This thesis examines cycling on four issues:- Why is there a need of more cyclists? - How can the total number of cyclists as well as the number of satisfied cyclists increase? - Which factors affect the choice of transport mode? - Which factors affect the choice of route?The first two questions are discussed from a literature study that was conducted at the beginning of the thesis.

Introduction: Anxiety and depression are common among patients enrolled in psychiatric outpatient care. Ear Acupuncture is an alternative form of treatment that has been shown to relieve anxiety and depression in previous studies.Aim: To evaluate ear acupuncture as a group treatment for depression and anxietyMethod: A psychiatric outpatient clinic has been offering group treatments with ear acupuncture for anxiety and depression for 5 weeks. Participants of the study have answered self-rating scales Montgomery Åsberg Depression Rating Scale, Beck Anxiety Inventory and Sheehan Disability scale before and after the treatment period. Material was collected in the period 2008-2012 and has been analyzed in SPSS.Results: Data from 31 patients were included in the study. The results from the study showed a significant difference, between the Measurements before and after treatment, with a reduction of the average values in the three different scales.Summary: From this study, it is difficult to draw any conclusions about the effect of ear acupuncture.

Compressed air is a low efficiency media, and is thus very expensive to produce. This thesis work began by mind mapping how to create savings on the compressed air system at Billerud Skärblacka AB. Certain issues have been chosen for further studies.In order to identify the consumption of compressed air at PM 8 and 9, several Measurements were made. At PM 8 there were not found any pressure drop, only large pressure variations for short periods of time. The causes of these pressure variations were not established.

The purpose of this masters thesis is to examine how managers in public libraries are managing financial cuts. Questions posed are: What strategies are used by the library manager to handle the cuts and how are the strategies being worked out? What are the consequences of the cuts? How do the managers use their library plans in the work with the cuts and how do the plans change as a consequence of the cuts? Library managers in eleven communities are interviewed about their financial cuts in 2003 and/or 2004. The result shows that cuts are made in different ways. The study analysed the managers statements with a model about strategies created by Oulton.

The purpose is to examine social workers view of vulnerable children and their needs. We are also interested to know how social workers think and discuss concerning the help these children are given. Our main questions in our study are; How do social workers define vulnerable children? Which needs do vulnerable children have according to social workers? Which opportunities and difficulties might there be in the decision making when trying to help these children? Which public authorities do social workers cooperate with? Which opportunities and difficulties do social workers find in the cooperation?This study is based upon interviews with ten social workers in the social childcare division in different municipalities in Skåne region, Sweden. Our results are explained and analyzed with a qualitative approach through different aspects of power- and Human Service Organization theories.

Purpose: The purposes of the current study were to investigate whether there were any differences in the perceptual ability between professional and non-professional ice-hockey players and whether professional players are better at distinguishing, paying attention to and concentrating on what is important during intense physical activity. Method: Twenty male ice-hockey players (10 from both the Swedish first and third divisions) participated in the study. Wingate test were used for physiological Measurements while three psychological tests were presented in front of the participants. Stroop, Flanker and Fast counting tests were used to measure perceptual and coping abilities during intense physical activity and the differences between the two groups. Results: Fast counting and Flanker word 2 tests showed a significant difference between the two groups, whereby the professional groups was faster and more accurate than the non-professional group in answering.

Duchenne Muscular Dystrophy (DMD) is a hereditary X-linked fatal disease that affects 1 in 3500 male births. It is the most common kind of muscular dystrophy in children and leads to death in the late teens or early 20s for many patients. The mdx mouse is a model of DMD that can be used to investigate experimental therapies. Overexpression of a glycosyltransferase, CT GalNAc, in mdx mice has been demonstrated to prevent the development of muscular dystrophy. Overexpression of another glycosyltransferase, LARGE, is currently being investigated as a treatment for another group of muscular dystrophies, the dystroglycanopathies. In this study, we overexpressed LARGE in mdx mice in order to investigate its effect on the development of muscular dystrophy.

The calf extrator?s function has been studied, through measuring traction and how this varies in different situations, in comparison with corresponding manual traction situations. This was done against the background that excessive force at assisted calvings at dystocia can mean life threatening damages on the calf such as grave acidosis, vertebral fractures, femur fractures and rib fractures. The calf extractor has earlier been measured to pull with greater force than the established maximum force of ?two strong men?.

This is a product development project which has developed a prototype in order to facilitate for people using mobility devices when they want to buy a larger quantity of groceries. The prototype is a shopping cart composed with the upper part of a walker.Today there are many different types of mobility devices used by elderly and people with physical impairment. According to Myndigheten för samhällsskydd och beredskap (MSB) are accidental falls the most common cause of accidents in Sweden.This project has been using Computer Aided Design (CAD) as a tool to create a visual image of the prototype. The advantage of this is to modify the functionality and performance of the prototype on the computer before the modification takes place in the real model. Using human manikins, the CAD model was rendered in natural surroundings to get as true a picture as possible.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their Measurements are presented.

Denna avhandling behandlar stegljudet i två trähus på campus i Växjö. Staden lyfts ofta fram som en bra förebild inom miljö- och klimatfrågor. Det kommunala fastighetsbolag som äger, förvaltar och bygger universitetets byggnader är intresserade av dessa frågor när nya hus ska byggas. De två senast byggda husen är byggda med trästomme, som anses vara ett bra miljöval. Framtida hus förväntas även de byggas med trästomme.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness Measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Earlier studies of musculoskeletal problems with milkers working in milking parlour operators have shown that it is a physically demanding occupation. The extremities that are most exposed are neck, shoulders, hands and wrists. Those systems that have been studied in present cases are fishbone and some tandem barns. There have been changes in the working environment during the past ten years. The mechanisation has been developed for the better with automatically removers of the milking units and vertically adjustable floors in almost every daily milking barn. In other hand the milk production are more industrialised and more related to stress today.

The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.