Sökresultat:
3312 Uppsatser om Measurements of interest - Sida 3 av 221
Mätningar av statiska och dynamiska egenskaper för bakaxel.
To design new and high tech products the engineers rely more and more on computer based simulations to investigate the properties and behavior for a component or system.To verify these computer based simulations the dynamic properties for the components of the drivetrain needs to be verified. Therefore measurements of the stiffness and vibrations for the rear axle has been performed. This report show how the measurements has been implemented and evaluated, along with some interesting results for the rear axles properties.The static stiffness for the drive shaft along with the axle-gear has been determined. It is found that the stiffness for the whole rear axle is near the stiffness for the drive shaft, which means that the drive shaft becomes the dominant component of the system and affects the rear axle stiffness the most. The measured stiffness of the driveshaft is close to its theoretical stiffness.The stiffness for solely the hypoid-gear have been calculated using the stiffness for the rear axle and driveshaft, and thus has a range for the stiffness of the hypoid gear been determined.The backlash for the whole rear axle and for some individual components has been determined, where the backlash between pinion and crown-wheel has negligible impact on the total backlash.Measurements of the crown-wheel and pinion movements have been conducted, where the direction of movement is consistent with the theoretical direction of the forces.The vibration measurements show that the vibrations are more severe at certain rotational speeds.
Tracheas dimension hos Engelsk Bulldog : en retrospektiv radiologisk pilotstudie på svenska hundar
There is desire to evaluate the tracheal diameter in the Swedish population of English Bulldog, a breed with breathing disorders, and if possible use it as a criteria for breeding in the hope of improving the life situation for these dogs. The Swedish Kennel Club has together with the Swedish Club for English Bulldog and veterinarians presented a five year radiological study that has the purpose to give an average look on how the tracheal situation is in the population. The trachea will be evaluated through two different methods, both measuring two distances in the thorax. The first one compares the tracheal diameter to the height of the cranial opening of the thorax, and the second one to the width of the third rib. With the measured distances one will calculate a quotient and compares it to the reference values.This study is designed to get a preliminary evaluation, based on the 65 dogs that were available on the time for the study, with measurements done by two persons on three different occasions each.
Effektivitetsmätningar i inköpsfunktionen
The objective of this study is to determine if and how Swedish businesses measure the efficiency of their purchasing departments.In this study I have interviewed six medium to large successful companies and asked them· Which ratios they use to measure the efficiency of their purchasing departments· Why they use these ratios and· How the results of these measurements are usedI can conclude that although there are no ratios or other measurements that directly measure the efficiency of purchasing indirect measures do exist.The measures applied are usually the result of demands from management and the results are reported back to management and used to follow development within a particular field of purchasing. Benchmarking, especially external benchmarking, is unusual..
Förbättrad resistansmätning för grova aluminiumledare
The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible.
Broschyr om avändarprofiler
The project group is participating in a measuring project that is a cooperation between CIT EnergyManagement AB, the Measuring unit of Chalmers and College of Dalarna.The results from the measurementswill be put together and presented in a brochure.When designing the brochure a great deal of planning has been made how to attract the targetgroup.To make the contents of the brochure more attractive, which mainly will contain text, a lot of imageswith a symbolic substance have been used. To keep the brochure together it has been divided into fivechapters that each has been given one specific colour. The colours are consistent on initials, headlinesand images.At the moment the results of the measurements are not yet ready and the text for the brochure is notpossible to complete now. This project is expected to finish in the fall when all the measurements havebeen compiled..
Förbättrad resistansmätning för grova aluminiumledare
The goal with this master thesis has been to evaluate and to examine the
stationary resistance bridge. The resistance bridge uses a 4-point measuring to
determinate the resistance, which is used in the manufacturing of the
conductor. It is then used when the resistance is to be decided for coarser
aluminium conductors. A conductor has to fulfil certain demands to be able to
move forward in the process. One of these demands is the resistance in ohm/km,
which has demands that the measure values of the resistance bridge are as true
and precise as possible.
The stationary resistance bridge had been examined through various kinds of
measurements to be able to see how stable the system is and how to obtain a
measure value as optimized as possible.
Fältmätningar av limträbalkars elasticitetsmoduler : utvärdering av tre mätmetoder
This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.
vindkraftens påverkan på elkvaliten
This thesis concerns how the power quality in the grid is affected by the connection of wind power plants. As things are at present, Fortum Distribution AB has a number of wind turbines and wind parks connected to the own grid. As the pressure on building and connecting additional wind power is increasing, so is also the interest of how the already existing wind power generation affects the power quality in the nearby distribution grids. The study is performed by direction of Fortum Distribution AB and is limited to the 10 kV/40 kV-grid in Bohuslän, Sweden. The methods for calculation of power quality are compared to the results of a number of measurements.
Naturskolan- en metod till lärande? : Outdoor teaching - A method for learning?
The purpose of this essay is to find an answer to whether the methodology used by the Naturskolan conduces to learning and also if the Naturskolan, as a method of its own, leads to an increased interest in natural science for the pupils participating in the classes at the Naturskolan.The method which has been used to reach the results of the study is a quantitative opinion poll. The results reached through the study has been compared to previous research in the subject. Deeper studies were made to examine however the interest of the pupils was influenced by their visit at the Naturskolan.The results of the study show an increase of interest in natural science after visiting the Naturskolan. It also shows that the teachers? interest in natural science and outdoor pedagogy has increased by the visit at the Naturskolan.Through this study we came to the conclusion that the Naturskolan is a good method to learning..
Hållbar katastrofturism - ur ett miljöperspektiv
This thesis is about catastrophe tourism and the sustainability of the tourism in an environmental perspective. The purpose is to see if there is any interest for that kind of tourism and to see if the people who have an interest or curiosity of it thinks about the environment when they are traveling. A quantitative survey was made on the internet and people on Facebook, Resedagboken.se and Reseforum.se had the chance to answer it. There is an interest of catastrophe tourism and a few have been to catastrophe sites or would like to visit. The conclusion of the thesis is that there is a possibility of a sustainable catastrophe tourism because most of those who answered that they had or wanted to visit a catastrophe site also thought about the environment and cleaning up after themselves..
Naturens p?verkan p? elever i skolan: En forsknings?versikt ?ver hur biologiundervisning utomhus p?verkar elever med fokus p? intresse
In the Western world the interest in science in schools is steadily declining. Focusing on
interest is important to encourage students to lifelong learning which is a written purpose of
the Swedish curriculum. This literature study examines if biology education outside in nature
could be a part of the solution for this problem and the question of issue is how can education
outdoor enhance students? interest for biology and what other aspects does this effect
simultaneously? The method of block search was selected for addressing this question,
utilizing the ERIC and ERC databases. The results show that situational interest increased
with outside education due to aspects such as: novelty, hands-on, knowledge acquisition and
social interaction.
Utvärdering av en FPGA för rymdbruk
A new FPGA suitable for space applications has just reached the market. To investigate whether there are any possible flaws or limitations similar to those previously seen on FPGAs, an evaluation has to be done. This master thesis contains the evaluation of this new radhard FPGA with focus on possible design limitations and package related electrical phenomena.Areas evaluated: Ground-/VDD bounce, Cross talk, Rise time sensitivit, Power cycling, Power consumption, Place and route tool, Radiation hardnessThis report contains all steps in the evaluation. From method to measurements, comparisons, theory, results and conclusions. In the evaluation work, special effort has been made to develop designs that really stress the FPGA to find potential problems.
Effektmätning i pump
The interest for power and energy measurement has greatly raised with todays increasing electricity prices and enviromental awareness. In the search for energy efficient solutions, the measurements are more complex due to increasing of non linear components. Harmonics and non sinusoidal voltages put high demands on sampling and filtering. Meanwhile, the price must be controlled so the customer still will find it interesting to invest in smaller plants. ITT W&WW asks for a robust, heat resistant power meter with compact dimensions to allow mounting inside the casing of a pump.
Gymnasieelevers intresse för tecknade serier
This master's thesis deals with the interest in comics among students at the social science programme in an upper secondary school. The history of comics and the reading habits of comics have also been examined. For the completion of this study 54 students, 19 boys and 35 girls, took part in a questionnaire. The results of this statistical survey shows that the department of comics at Malmö city public library plays an insignificant role concerning the interest and reading of comics for the students. The main readings of comics for the students are in the daily paper, which resembles reading habits of adults.
Speglingen av organisationers egenintresse i remissvar : En studie av yttranden över fyra av Statens Offentliga Utredningar
Objective: In this thesis, we assume that the organizations' interests are governing their behavior/positions. It seems possible to draw conclusions about organizations'interests on the basis of the behavior / positions that will appear in the givenopinions on Swedish Public Investigations. The purpose of this thesis is toidentify self-interests of the studied organizations as they appear in their givenopinions.Method: The authors have made a qualitative and quantitative study of the opinions.Theoretical perspective: The basis of the study is the organization theories that focus the self-interest oforganizations.Empiric: Information is taken from four Swedish Public Investigations: the New Company Act, International Accounting for Swedish companies, Abolition of the audit requirement for small and medium sized enterprise and Simplified accounting. Altogether 310 opinions have been given on these, out of which we have studied 59. Furthermore, we have collected information on tasks, activities and objectives from the websites of the opinion giving organizations.Conclusions: In the literature, we found, as mentioned, that organizations havet hree self- interests which we define as general self-interests.