The purpose of the study is to investigate how much interest media has shown selected topics in the corporate governance systems in Germany and Sweden. The four selected aspects are: ownership structure, employee representation on the boards, disclosure of board members? compensation and female directors on the boards. The reasons for and consequences of the similarities and differences will also be discussed. The German and Swedish corporate governance systems construct the key basis of the study, emphasised on the four chosen aspects.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

National and international studies, such as PISA and TIMSS, which are part of the national evaluation system, are carried out continuosly. Skolverket, in collaboration with researchers, are responsible for the implementation, evaluation, and analysis of the studies. National results show an increasing percentage of pupils who do not reach the goals in mathematics. The last completed international studies PISA 2009 and TIMSS 2007 show an impaired trend of knowledge, in international comparison. Moreover, studies also show that the differences between schools and also within the same school in Sweden have increased.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Syftet med detta examensarbete var att jämföra olika system för att lagra spannmål på.Spannmål som skall blandas in i fodret till de värphöns som finns på gården där det system som jag finner är bäst skall sättas upp. Jämförelsen gäller dels helt olika system, silo tork kontra lufttät lagring och olika systeminom lufttät lagring. Jämförelsen har varit en mestadels ekonomisk jämförelse men jag har även gjort en liten teknisk jämförelse. För att få fram fakta som jag kunde basera min fallstudie på så jämförde jag fyra olika system mot varandra.Det som jämfördes var els två system med lufttät lagring, ett system med silo torkning och ett system med inköpt färdigtorkad spannmål. Jag gjorde olika investeringskalkyleroch fick fram den totala årskostnaden för varje system och dels kostnaden per kilo spannmål för varje system samt också vad foderkostnaderna blir.

This master thesis includes a description of how a number of sensors are put together in a sensor platform. It also gives a description of how localization and mapping has been performed with data collected from the sensor platform. Localization is a prerequisite for most of the tasks that can be requested from an autonomous mobile robot. In many situations the GPS signal is not available and hence an additional localization system is required. One approach is to apply localization based on landmarks extracted from the robots surrounding.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The aim of this paper is to shed some light on to what extent the process of making reality of Inclusion, as stated in International Declarations and in Government policies, has reached the actual educational activities in the school system. My chosen method is a case study, in which I have combined a survey with interviews in order to retrieve enough data for my analysis. I have also studied a number of policy documents and relevant literature. My analysis concludes, for the school that I have chosen to study, that there is still a lot to be done before inclusion becomes a reality. There are many obstacles to overcome, for instance; a constant struggle to obtain enough resources and to reach relevant levels of competence within the personnel.

VoIP-system inom fo?retag blir mer vanligt. Sa?kerheten bo?r da? beaktas fo?r att undvika hot som riskerar konfidentialitet, integritet och tillga?nglighet. Denna rapport visar resultat fra?n tva? olika VoIP-systems sa?kerhet med hja?lp av praktiska penetrationstestscenarion i labbmiljo?.

This report describes a study aimed at uncovering flaws and finding potential improvements from when the modelling tool EAAT is used in conjunction with the modelling language CySeMoL. The study was performed by developing a framework and applying it on CySeMoL and EAAT in real life context networks.The framework was developed in order to increase the number of flaws uncovered as well as gather potential improvements to both EAAT and CySeMoL. The basis of the framework is a modified version of the Quality in use model from ISO/IEC 25010:2011 standard. Upon the characteristics and sub characteristics of this modified model different values for measuring usability where attached. The purpose of these values is to measure usability from the perspectives of both creating and interpreting models.