On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The production of cheese is in continuous development with objectives to in-crease productivity, achieve changes in shelf life and functional properties of the products. One concept in the development is to substitute milk fat with vegetable fats and oils in the manufacture of cheese. The objective of this study was to investigate effects on cheese yield and cheese quality of 4 different semi-hard analogue cheese products produced by substituting milk fat with vegetable fat, each analogue cheese with a specific mixture of vegeta-ble fat. As reference a cheese produced with anhydrous milk fat was used. The yield and recovery of fat and protein were determined by recording the weights of each cheese direct after press and after 20±2 days of storage and analysis of the composition of the cheeses after 20±2 days of storage. The cheese was fur-ther subjected for texture profile analysis in a TA-XT Plus Texture Analyser and analysed with Differential Scanning Calorimetry (DSC) to examine whether the fat behaves similar in the cheese as in pure form in respect to its thermal properties. The cheese yield was not significantly different when using different fats. Differ-ent amounts of water were absorbed during the water cooling.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Introduction: It is recommended to place all the vacuum tubes directly on a sample cradle after vein puncture to prevent analytic error. This recommendation is not always easy to follow because the samples are taken by different professionals under different situations.  The three most common analyses, platelets count, haemoglobin and prothrombin time were tested.  Therefore, it was interesting to compare results from the three most common analyses with or without sample cradle, to evaluate the influence of this step on the result. Methods: Three analyses were preformed, using blood from 50 different persons. Each person gave two vacuum tubes, each contained 4.5mL of venous blood for the study.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Fossil fuels are affecting our climate negatively and there is a limited amount of them in the world, which leads to the importance of finding alternative fuels. One alternative is biogas, which is produced though a digestion process of different organic materials in a biogasreactor. Organic substrate that comes from farms has the biggest potential to increase the production of biogas in Sweden. Primarily crops from farms, but also waste products like manure are of great importance.Today there is a calculated theoretical potential for biogasproduction of 14TWh per year, which is around ten times larger than Sweden?s production today.

Syftet med det här projektet är att komma fram till en ny lösning som ska underlätta för användare att få en bättre överblick av sitt klädbestånd samt att få användaren att ifrågasätta sitt klädbestånd. Få att nå resultatet har jag gjort användartester inom min målgrupp, intervjuat formgivare i branschen och arbetar med undersökande formarbete. Resultatet blev en flexibel herrbetjänt med ett feminimt formspråk som passar lika bra i det lilla hemmet som i den stora villan och kan följa användaren under en lång tid. .

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The purpose of this thesis was to create a strategic/tactical road access plan. This was done by designing an analytical method which gives the road manager a template to create long-term road access plans. The analytical method will help to identify and appraise roads to be upgraded and give information when it is time for building new roads. The study method involved developing an analytical method. The method was comprised of five main parts: the harvest plan, analysis of the road network, transport costs, quality and storage costs and finally, identification of investment alternatives.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

At the Skoghall pappermill, sulphatepaper pulp is produced in a continuous digester originally from 1969. To be able to maintain a high level of production there is a need for a process with few disturbances. Variations in how well the wooden chips are packed in the digester is one form of disturbance. Today there are no available measurements on how well the chips are packed. Instead this is regarded as being constant.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

In this essay, Neolithic potsherds from Alby, Öland has been examined. The purpose was to investigate the connection between the lipid residues and the vessel shapes and ornament. To solve the attempt lipid and morphological analyses were executed. The lipid analysis revealed traces of different food residues and the morphological method showed various shapes and decors. The result indicates that the Alby ceramics has been used for cooking/storage of different fish and meat dishes, as well as vegetables and that the vegetables doesn?t derive of cereals..