Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

Assessment is considered one of the most important tools used today by people in almost everything they do and learn. This also applies to school, where assessment is considered as a constant companion to teaching and used in order to develop students' learning and skills. Assessment is also an educational necessity which has different purposes and therefore different consequences.                                                                                                                        The idea of ??this thesis was on the basis of the interviewed teacher's perspective to investigate what role the formative assessment has on the development of pupils' learning and knowledge in mathematics for primary education, and explore how the teacher can, according to my informants, work with this assessment practice in the classroom so that it promotes the learning of the students in the best possible way.                                                                To carry out this study, I used qualitative research studies, the interview method, and also talked to five different teachers in the lower school ages on their view at the work of the formative assessment. Theoretical basis of the thesis is also based on the research that says that the assessment can be used to promote student learning and knowledge, but also the teacher's learning?s in the educational process: assessment can and should be an assessment for learning.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Internet har en allt större roll i vårt samhälle och sökmotorerna är ett av de vanligaste sätten att leta sig fram till relevanta webbplatser. Sökmotorernas algoritmer visar sig dock bli allt mer invecklade och effektiva genom att blanda in användaren och hämta information om dennes intressen. Sökmotorerna hämtar resultat som inte bara är relevanta i förhållande till sökfrasen, utan också i förhållande till användaren. Sökmotorn skapar en profil av varje användare och med den preciseras resultatet. I studien använder vi oss av litteratursökningar och intervjuer för att undersöka vilken inverkan profilerna har på resultatet samt vilka åsikter användare, inom målgruppen studenter, har angående resultatet och profilerna.

The following essay is a study of the theatre-play Min Arm, a translation and performance by Per Lasson for Fria Teatern in Stockholm 2009-2010. Actor, director and playwright Tim Crouch wrote the original script My Arm in English in 2003.With basis in intermedial theory, as defined by Jörgen Bruhn, as well as Hans-Thies Lehmann?s theory on post-dramatic theatre this study investigates the meaning-building processes in Min Arm as a theatrical performance. Concepts of the difference between stage play and performance text are borrowed from and inspired mainly by Eli Rozik?s Generating Theatre Meaning.

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

The main objective of this thesis was to develop appropriate strategies and find factors that affect the usability of parameterized designs. This was accomplished by investigate the user-interface and how it is designed to meet the user's information needs. The thesis also embraces the basic theories in terms of investigation, cognitive design principles and human behavior patterns in the interaction with the machine. The approach has led to an explorative investigation in this subject area.The thesis also had the purpose to achieve more efficient ways for development of motor chainsaws at Husqvarna AB's department Global Cutting Equipment. That can be achieved through reduce costs of development per sold unit.

Authors: Patrik Jäverbo & Jon LindheTitle: Greener on the other sideLevel: Bachelor of JournalismLocation: University of GothenburgLanguage: SwedishIn later years the strict laws and policies surrounding cannabis use have been questioned around the world by several influential leaders, among them US president Barack Obama and former UN secretary general Kofi Annan. It has been argued that the ?War on Drugs? has done more harm than good and in some American states and a number of European countries the drug have been legalized or decriminalized. Everybody does not agree however, that legalization is the best course of action and in Sweden the emotions have sometimes run high in the discussions taking place in television shows and newspapers.The purpose of this study is to examine the image media portrays of cannabis; based on the theory that mass media is an important influence on the individual and the way in which he or she views the world. To put the result into a context the Swedish media image will be compared with the one in Denmark and Norway.

The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland.

The following essay is a study of the theatre-play Min Arm, a translation and performance by Per Lasson for Fria Teatern in Stockholm 2009-2010. Actor, director and playwright Tim Crouch wrote the original script My Arm in English in 2003.With basis in intermedial theory, as defined by Jörgen Bruhn, as well as Hans-Thies Lehmann?s theory on post-dramatic theatre this study investigates the meaning-building processes in Min Arm as a theatrical performance. Concepts of the difference between stage play and performance text are borrowed from and inspired mainly by Eli Rozik?s Generating Theatre Meaning.

This thesis work has been performed at Volvo Aero Corporation in Trollhättan, at the department of ?hot structures? involving aircraft engine GP7000. The purpose with the study was to investigate the possibility to reduce size of the forging of flanges on the rear turbine frame when purchasing. Thereto examine the parameters that affect the flanges motion during the manufacturing process. The goal was to provide Volvo Aero with foundation to later bring in slimmed forgings.

This master thesis has been performed at Solvina in Gothenburg for Skellefteå Kraftand Vattenfall Eldistribution. The aim of it is to investigate the consequences of theinstallation of a wind power plant on the mountain Uljabuouda in the vicinity ofArjeplog. Especially the impacts on voltage and transient stability are examined.Furthermore, the amount of extra strain on the voltage regulation equipment and theneeds for increased regulation capabilities are looked into.The wind power plant is planned to be built by Skellefteå Kraft and connected to a130 kV grid owned by Vattenfall Eldistribution. The work comprehends the followingmain parts:- Theoretical studies aimed at wind turbines and power system stability issues.- Modelling of the type of wind turbines assumed to be built on Uljabuouda.- Simulations of different operation cases and analysis of the simulation results.The results from the simulations show that, as far as voltage stability and extraworkload on tap-changers are concerned, the wind power plant does not, in anysignificant manner, worsen the present conditions. The problem of overloading theline between Arvidsjaur and Vargfors is also minor.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.