Sök:

Sökresultat:

780 Uppsatser om Meal frequency - Sida 32 av 52

Arbetsmiljö och säkerhet : På mindre företag inom byggindustrin

The accident frequency in the construction industry has shown a downward trend every year but this trend was broken 2010th. It is often lack of precautionary measures within work environment and safety that is the cause of accidents. The big construction companies understand the importance of precautionary measures within work environment and safety, as they spend a lot of money and time on that matter. By examining the work environment and the safety of the small construction companies you can see how they work. The report will presents how these small companies work with work environment and safety, and also how they follow the safety instructions that are available and how they make use of safety equipment.

Försvararens engagemang i påföljdsfrågan : Sanningsplikt, klientvård och klientens instruktioner

Denna utvärdering av Umeå universitetsbiblioteks (UB) övergång till RFID-teknik (radio frequency identification) tar upp hur personalen har upplevt konverteringstiden och övergången. Syftet var att undersöka den involverade personalens åsikter och attityder kring omställningen och de eventuella konsekvenser och effekter som RFID-övergången fört med sig.Undersökningen genomfördes med korta uppsökande intervjuer vars frågor utformats i samråd med Umeå universitetsbiblioteks projektledare för RFID-konvertering. Frågorna resulterade i kvantitativa svar men respondenterna gavs möjlighet att utveckla sina svar med egna reflektioner. Av de totalt 17 respondenterna var nio män och åtta kvinnor i åldrarna 32-64 år. Resultaten visar på en till stora delar nöjd respondentgrupp, majoriteten tycker att övergången till RFID har fungerat bra, de flesta känner sig opåverkade i sin yrkesroll efter införandet och endast ett fåtal har lämnat konverteringstiden med några bestående men som drabbat deras arbete eller de själva. Bland respondenterna finns det en generellt positiv inställning till RFID-teknikens framtid på arbetsplatsen och ett flertal hoppas på en vidareutveckling och utbyggnad av tekniken..

?VEM SA ATT POLITIK INTE KAN VARA KUL?? En kvantitativ inneh?llsanalys om frekvensen av politainment hos politiska ungdomsf?rbund p? TikTok ?r 2023 respektive ?r 2024

The political landscape is constantly changing and influenced by outside forces. The strong connection to the traditional media has evolved to include a new important part, social media. A good way for the politics to utilize social media is through their youth associations, whose main purpose is to engage young people and spark their interest in politics. Due to the increasing influence of social media, the politicians, parties and various actors have to adapt to its demands, to be able to gain visibility on these platforms. One way to adapt is to become more entertainment driven, because these platforms are a safespace where people find time to relax and have a good time. With a growing emphasis on simplified, engaging and more fun political massages, political communication has changed its form. This phenomenon is referred to as ?politainment? and encapsulates the merging of politics and entertainment. The purpose of this study is to examine and measure the frequency of politainment in Swedish political youth associations political communications.

Karaktärisering av hästerns gångarter med accelerometerteknik

In today?s horse keeping, there is an increasing awareness of the importance of movement and activity for the horses comfort and tenability, while tradition has it that horses should be kept in boxes and small paddocks. In order to develop housing systems that fulfils and optimizes the horses needs regarding movement and activity, we need to know more about factors that influence the activity patterns of horses. A first step is to be able to record and analyze the gaits in horses with an automated system. This could be done by use of accelerometer data.In this pilot study, existing accelerometer technique was used to characterize the different gaits in horses (walk, trot and canter) by studying how their respective signal patterns differ and how this is influenced by the size of the horse.The accelerometers being used in this study measures the movement in three different spaces; horizontal, lateral and vertical.

Hur ska vi klara volymökningen?: en fallstudie vid
Mekanotjänst i Söderhamn AB

Mekanotjänst i Söderhamn AB är en uppdragstillverkare som ingår i Mekanotjänst industrier. Företaget är specialiserat på produktion av mekaniska produkter främst ur tunnplåt. Det pågår en utveckling inom företaget som är styrd av efterfrågan. Utvecklingen innebär en ökad förädling genom monteringsarbete. Två nya Ericssonprodukter, POWER SUPPLY SUBRACK och SUBRACK AMM 6p ska börja tillverkas i höga volymer vid Mekanotjänst i Söderhamn AB.

Konstruktion av datainsamlingskort för mätsystemet COMET

During test flights SAAB uses the data acquisition system COMET 16. The part of the system that receives the signals from the sensors and converts them is called KSM 15. The purpose of this thesis is to develop a data acquisition module on stacked PC/104 modules with a lower production cost. Our work has been divided into one part about analog signal conditioning and a second part with digital filtering and memory management of the sampled data. The analog part, designed of regular components like instrument amplifiers, voltage references, operational amplifiers and multiplexers, adjusts the sensors signal levels for the ADC?s that converts the signals.

Produktspårning med RFID : Konceptutveckling och utvärdering

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

Dokumentation av en experimentell biogasanläggning

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

Design of a Direct-conversion Radio Receiver Front-end in CMOS Technology

In this Master's thesis, a direct-conversion receiver front-end has been designed in a 0.18um CMOS technology. Direct-conversion receivers (DCR) have obvious advantages over the heterodyne counterpart. Since the intermediate frequency (IF) is zero, the problem of image is circumvented. As a result, no front-end image reject filter is required and the channel selection requires only a low-pass filter, which makes it easy to integrate directly on chip. However, the DCR also suffers from several drawbacks such as extreme sensitivity to DC offsets, 1/f noise, local oscillator (LO) leakage/radiation, front-end nonlinearity and I/Q mismatch.

En känsla av samhörighet : En utvärdering av Umeå universitetsbiblioteks övergång till RFID ur ett personalperspektiv

Denna utvärdering av Umeå universitetsbiblioteks (UB) övergång till RFID-teknik (radio frequency identification) tar upp hur personalen har upplevt konverteringstiden och övergången. Syftet var att undersöka den involverade personalens åsikter och attityder kring omställningen och de eventuella konsekvenser och effekter som RFID-övergången fört med sig.Undersökningen genomfördes med korta uppsökande intervjuer vars frågor utformats i samråd med Umeå universitetsbiblioteks projektledare för RFID-konvertering. Frågorna resulterade i kvantitativa svar men respondenterna gavs möjlighet att utveckla sina svar med egna reflektioner. Av de totalt 17 respondenterna var nio män och åtta kvinnor i åldrarna 32-64 år. Resultaten visar på en till stora delar nöjd respondentgrupp, majoriteten tycker att övergången till RFID har fungerat bra, de flesta känner sig opåverkade i sin yrkesroll efter införandet och endast ett fåtal har lämnat konverteringstiden med några bestående men som drabbat deras arbete eller de själva. Bland respondenterna finns det en generellt positiv inställning till RFID-teknikens framtid på arbetsplatsen och ett flertal hoppas på en vidareutveckling och utbyggnad av tekniken..

Design av mikrovågsövergångar

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

Lärare och digitala verktyg i matematikundervisningen : En kvantitativ studie om lärares inställning och kompetens kring användningen av digitala verktyg i årskurserna F-3

The purpose of this study is to examine in what extent primary school teachers, teaching children in the age of 6 to 9, choose to use digital tools in their teaching of mathematics. I also want to examine what these teachers think, in terms of advantages and disadvantages, about using digital tools on their mathematics lessons. Finally I want to examine what skills they possess about digital tools.I am using a quantitative method to collect my data. The quantitative survey consisted of a questionnaire survey of ten questions that 38 primary school teachers have answered.The results of my study show that the teachers to some extent use digital tools when they teach mathematics and that the availability of various digital tools are generally good. But it turns out that the availability of tools is not a guarantee that they are used in teaching of mathematics.

Debatten om bibliotekarieutbildningen ? inför förändringarna av utbildningen år 1972 respektive år 1993 ? sådan den återspeglas i bibliotekstidskrifter

The purpose of this thesis is to examine the debate in library journals and in official reports on the subject of library education in Sweden. We focus on two periods: the period just before the year 1972 ? when the library education was transformed into being occupationally-oriented and the period just before the year 1993, when the library education was transformed into being ?academised?. This Master?s thesis shows that the debate and the arguments among initiated people in the library world have had some impact on how the library education was transformed later on.

Vad styr förekomsten av sälg och asp? : en studie av olika beståndstyper inom Hamra kronopark, Dalarna

Aspen (Populus tremula L.) and goat willow (Salix caprea L.) are two important tree species in the aspect of nature conservation. Due to the elimination of forest fires, a former negative attitude towards deciduous trees in forestry and a strong herbivore pressure, these tree species have been negatively affected during the last fifty years. The aim of this study was to investigate whether the occurrence of aspen and goat willow could be related to either human impact or to site properties, such as ground moisture and vegetation type. A side study included an inventory of a number of cyanobacterial tree lichens on aspen and goat willow in order to try to relate the occurrence of these lichens species to stand history and stand properties. The study was performed in Hamra State Forest in northern Dalarna. Nature reserves were compared with stands in managed areas.

Kärnkraft : Ett arbete för drifttekniker?

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

<- Föregående sida 32 Nästa sida ->