Currently there is a controversial debate about that we must reduce our impact on the global warming; therefore both the Government and the local authorities have invested heavily in developing renewable energy in Sweden. The major development on the wind power market can be seen as a result of both the technological development and also on the decision that the Government took in 1996, which opened up the wind power market for private parties.This paper has aimed to examine the types of financial innovations that have arisen from the investments and financing of wind power on Gotland, and what these innovations can contribute to the future development of wind power.The problems that this thesis is based on is; what kind of financial innovations have occurred within investment and financing of wind power? How can these innovations contribute to the continued development of wind power on Gotland? The conclusion of this study shows that respondents and participants have defined a number of financial innovations that have emerged. Where some of the innovations only can be seen as incremental since they are based on continuous improvements, while others can be seen as radical as they are completely new for the context in which they operate. The study has also shown that Gotland has a great potential to produce more renewable electricity, but the development is dependent on the new power lines being built, in order to export electricity to the mainland..

The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.

The thesis investigates how two of the world?s most powerful international actors, the US and the EU want to promote democracy and human rights. The aim is to compare how the US and the EU work in order to support a democratic development in the world. In order to fulfill the purpose of the thesis a qualitative text analysis was used. Since the aim is to compare the US and the EU I believe this method is beneficial.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The purpose of this thesis is to identify power structures and instruments of power within the Jehovah?s witnesses and investigate how they affect the baptized youths baptized within the organization. The material consists of qualitative in-depth interviews and is analyzed with Foucault's theories of power. The results show that the participants have a very strict relationship to the rules of the congregation and also that they take great care in observing these rules carefully. It becomes evident that young members are exposed to disciplinary measures from the organization.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The purpose of this thesis is to identify power structures and instruments of power within the Jehovah?s witnesses and investigate how they affect the baptized youths baptized within the organization. The material consists of qualitative in-depth interviews and is analyzed with Foucault's theories of power. The results show that the participants have a very strict relationship to the rules of the congregation and also that they take great care in observing these rules carefully. It becomes evident that young members are exposed to disciplinary measures from the organization.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

The essays main intent is to examine whether there has been a proper implementation of the Council?s directive 1999/70/EG into Swedish law regarding the requirement for measures to prevent the abuse of successive fixed-term employment contracts. To achieve this purpose there is a need for an examination of current law. The essay also has some secondary purposes. One of these secondary purposes is the question of whether the implementation of the Council?s directive 1999/70/EG has lead to a reduction of the workers employment protection, which is closely connected to my main question and the violation case.

Research concerning movement patterns of wild animals has been advancing since GPS technology arrived. But studying the snow leopard (Panthera uncia) is still difficult because of the harsh territory it inhabits in Central Asia. This study took place in south Gobi, Mongolia, and aimed to estimate the time spent at kills and the maximum distance away from kills between visits. Snow leopards were monitored with GPS collars that took a location every five or seven hours. Potential kill sites were established by identifying clusters of GPS-locations in ArcGIS and visited in the field for confirmation.

In this thesis a rural network in Norrbotten, Sweden, has been to designed and planned with the purpose of improving distribution reliability by exchanging existing overhead lines with underground cables. General network design considerations are discussed as well as the ones for the specific low voltage grid. During the design phase the maximum power of domestic consumers has been estimated using Velander?s method. Currents, voltage drop and impedance of the network have been calculated and fuse operation and selectivity has been considered.

The current debate about environment and climate change has contributed to more andmore investment in alternative energy sources such as wind, solar and biogas. The Swedish Parliament has set the target that wind power should supply 10 TWh in 2015.In Sweden, wind power establishment began in the early 1980s. Since then the development has gained a tremendous momentum. The purpose of this study was to find out what problems wind power brings and what power relations that exists in connection with wind power establishment and how the landscape is affected by windpower construction, focusing on some cases in Falkenberg and Varberg. This study shows that wind power establishment is a very complicated process.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.