This exam work project strives to investigate different roles a teacher can adapt to in classroom situations. The focus is on three different types, gained from a dissertation made by Evelyn Säll where she has investigated teacher students? opinions about the teacher?s role. These types are:the Dramatist, the Director and the Illuminator, and five teachers are defined accordingly. Questionnaires and observations are used as a tool in order to come to a conclusion.

At the department of Electronic Warfare Assessments at the Swedish Defence Research Agency in Linköping one of the activities is modelling and simulation of the duel between a robot and a target. The aim with this Master's thesis is to develop a simulation model of an hovering helicopter. First a theoretical description of the forces and moments acting on an helicopter is given. Then the equations of motion are derived. These equations are simplified to be valid only for a hovering helicopter and the result is a mathematical model.

The purpose of this thesis has been to determine experimentally how good a peltierelement is to convert waste heat from wood burning. Three different peltier elementswere used in a comparison study. The comparison was mainly done to know howmuch power could be obtained from each element. Even, a circuit with a step-upfunction has been created to give a higher output voltage than the peltier elementitself. The result of the experiments was a low output power, the highest valuereached 2.18W.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

The aim of my study is to investigate how last year students in upper secondary schoolunderstand certain mathematical concepts, in particular the unit circle and its trigonometry.I have used intentional analysis to interpret student?s actions when they solve certain tasks onthe basis of a cognitive, situated and cultural context.Interviews with four university teachers in mathematics about the unit circle, trigonometry,and mathematical understanding, serve both as background for the study and as basis for adiscussion, where I relate students understanding to what the teachers want new students toknow about these concepts when they begin university studies in mathematics.The students were arranged in three groups with three students in each group. Each group waspresented with two tasks, one in which they were asked to calculate the cosine values for onepointed, one blunt and one straight angle, each located in a separate triangle. They were alsoasked to decide whether the points (0,71; 0,71) and d (1 2 , 3 2 ) are located on the unit circleor not.My conclusion is that students mainly have an operational conception of the unit circle andtrigonometry. The lack of structural conceptions result in difficulties in seeing connectionsbetween the concepts in unfamiliar situations.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

This survey is a case study with the purpose to find out the teacher´s perceptions about students´ motivation to mathematics. Further this study aims for the teacher´s vision on how they consider students´ motivation in mathematics in secondary school. To collect research data I have used semi structured interviews with four secondary school teachers. The result constructs according to categories that depict the purpose of the study. These categories define students? motivation like achieving different goals, students? basic knowledge, abilities and perceptions of mathematics and external factors that affect students? motivation.

The aim of my study is to investigate how last year students in upper secondary schoolunderstand certain mathematical concepts, in particular the unit circle and its trigonometry.I have used intentional analysis to interpret student?s actions when they solve certain tasks onthe basis of a cognitive, situated and cultural context.Interviews with four university teachers in mathematics about the unit circle, trigonometry,and mathematical understanding, serve both as background for the study and as basis for adiscussion, where I relate students understanding to what the teachers want new students toknow about these concepts when they begin university studies in mathematics.The students were arranged in three groups with three students in each group. Each group waspresented with two tasks, one in which they were asked to calculate the cosine values for onepointed, one blunt and one straight angle, each located in a separate triangle. They were alsoasked to decide whether the points (0,71; 0,71) and d (1 2 , 3 2 ) are located on the unit circleor not.My conclusion is that students mainly have an operational conception of the unit circle andtrigonometry. The lack of structural conceptions result in difficulties in seeing connectionsbetween the concepts in unfamiliar situations.

The aim of my study is to investigate how last year students in upper secondary schoolunderstand certain mathematical concepts, in particular the unit circle and its trigonometry.I have used intentional analysis to interpret student?s actions when they solve certain tasks onthe basis of a cognitive, situated and cultural context.Interviews with four university teachers in mathematics about the unit circle, trigonometry,and mathematical understanding, serve both as background for the study and as basis for adiscussion, where I relate students understanding to what the teachers want new students toknow about these concepts when they begin university studies in mathematics.The students were arranged in three groups with three students in each group. Each group waspresented with two tasks, one in which they were asked to calculate the cosine values for onepointed, one blunt and one straight angle, each located in a separate triangle. They were alsoasked to decide whether the points (0,71; 0,71) and d (1 2 , 3 2 ) are located on the unit circleor not.My conclusion is that students mainly have an operational conception of the unit circle andtrigonometry. The lack of structural conceptions result in difficulties in seeing connectionsbetween the concepts in unfamiliar situations.

The aim of my study is to investigate how last year students in upper secondary schoolunderstand certain mathematical concepts, in particular the unit circle and its trigonometry.I have used intentional analysis to interpret student?s actions when they solve certain tasks onthe basis of a cognitive, situated and cultural context.Interviews with four university teachers in mathematics about the unit circle, trigonometry,and mathematical understanding, serve both as background for the study and as basis for adiscussion, where I relate students understanding to what the teachers want new students toknow about these concepts when they begin university studies in mathematics.The students were arranged in three groups with three students in each group. Each group waspresented with two tasks, one in which they were asked to calculate the cosine values for onepointed, one blunt and one straight angle, each located in a separate triangle. They were alsoasked to decide whether the points (0,71; 0,71) and d (1 2 , 3 2 ) are located on the unit circleor not.My conclusion is that students mainly have an operational conception of the unit circle andtrigonometry. The lack of structural conceptions result in difficulties in seeing connectionsbetween the concepts in unfamiliar situations.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

Lärare planerar undervisning och väljer vad eleverna ska arbeta med. Denna studie syftar till att undersöka lärares tankar om vilket matematiskt innehåll elever möter samt vilka förmågor elever tränar i arbetet med en uppgift i matematik. Studien genomfördes genom intervjuer med fem lärare som fick svara på frågor kring en uppgift i matematik. De övergripande frågorna handlade om matematiskt innehåll och förmågor, men även uppgiftens koppling till Lgr11 efterfrågades. Lärarnas svar kopplades till de specifika kunskaper som behövs för att undervisa i matematik.Studien visade att lärarna i hög utsträckning sorterade in uppgiften inom området kombinatorik och att de framförallt såg uppgiften som en problemlösningsuppgift.

Lime Hempcrete consists of lime, water and hemp and creates an insulating, sound-absorbing, lightweight and environmentally friendly material that can be used in wall, roof and floor structures (Bevan & Woolley 2008). This construction method is not yet developed in Sweden as there has been a ban on the cultivation of the hemp plant. This ban on the cultivation of hemp was removed in 2003, when the material got a boost. You can use it in many different ways and not just in the construction industry (Ahlsten, 2010).In this study we have investigated the possibility to produce prefabricated wall elements of LHC. We have also studied its mechanical properties and dehydration time.

The purpose of this study has been to analyze the relationship between commercial brands and a subculture, with a focus on a number of elements of success. These elements could be in the nature of sale stats as well as that of influence within the subculture. All of this within the context of the snowboard culture. In accossiation to this we have formulated a question of study:What marks brands which gains influence within a subculture in addittion to becoming an important factor in the self-expression process of the cultural members?In this study, we have practised a qualitative method based on six (6) independant interviews with participants, active within the snowboard culture as well as one outside marketing executive and one ethnological reseracher.