Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

An attempt were made to record the 1st movement of Beethoven?s Op. 57, with the objective of performing it as close to Beethoven?s will as possible, in the tradition of the ?historically informed performance? movement.The result of evaluating source material rendered a list of the most relevant material for this study, and hopefully that might prove useful for other studies with similar objective concering HIP and composer-intention based ?autenticity?.However, Beethoven?s will was only vaguely captured in the limited source material accounted for in this study, rendering it moderate-to-small reliability. It?s probably possible to achieve a higher degree of goal achievement, given more time and through the utilization of music psychology to further extrapolate the detailed parameters of Beethoven?s presumed extramusical will.The recording made was not to my satisfaction and has strengthened my view that the interpreter should take council from the collected knowledge of scholarly sources but must ultimately remain free in whether and how to utilize that knowledge.Lastly, I?ve measured the bpm in the resulting recording with a error margin of ±0,02 s.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

Everyone has to take a greater responsibility in energy issues, both individuals and companies. There have been some major developments in the construction industry but there is still a lot to be done. This diploma work thesis presents different methods of making existing construction shed establishments to use less energy. What is possible to do and how much energy is there to be saved? A shed establishment consisting of 8 shed units were studied in this project and the building simulation tool VIP-Energy was used to simulate different types of material in the sheds. An infrared camera was used to locate thermal bridges. There are several factors that can be improved to make a construction shed establishment to use less energy.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

The purpose of this study is to give a description of how six pedagogues in the third and fourth grade teaches mathematics and which working methods they use. When using the term working methods it is implied that it can for example be outdoors pedagogic, laboratory material, problem solutions et cetera. This material can both be an everyday material or a pedagogical material. The research was carried through by interviews and observations. Six pedagogues were interviewed in two different districts.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

User comments:Availability and Utilization in Online News Affiliated with Local Daily PressAuthor: Susanne AlmgrenSupervisor: Mats EkströmConstituent: Dagspresskollegiet (Annika Bergström/Ingela Wadbring)Course: Term Paper in Media and Communication StudiesTerm: Spring Term 2012Pages/word count: 91 pages / 38 334 wordsObjective: To examine the users availability to the user comment feature and how theusers utilizes the user comment feature in the context of an online news site affiliatedwith local daily press.Method: Mixed methods approach, content analysis and discourse analysisMain result: In this context, three out of four news stories (76.5 percent) has beenallocated with the user comments feature. The highest availability to the user comment feature was found in news themes covering sports and entertainment, followed by financial news. News stories lacking the user comment feature weremainly found in news themes concerning crimes and accidents. The user comment frequencies are not normally distributed along news stories. On the contrary, 62 percent of the news stories did not get any user comments at all.

A substantial part of the Swedish outdoor education is being practiced in so called ?school forests?. The concept school forest was first introduced in the 1980?s by the organization Skogen i Skolan. The definition of a school forest is an area that is being used for educational purposes, over which the school and the land owner has reached an agreement of how the school may utilize it.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

I examensarbetet ÄGG har jag testat att anända en sökande och experimentell inställning till textila material och tekniker som utgångspunkt för att formge en kollektion plagg. Som inspitration och utgångspunkt för arbetet med material och teknik har jag använt mig av ägget, dess material och funktioner..

This bachelor thesis covers fire protection methods of structural steel and the aim is to develop an information tool designed for inexperienced structural engineers. The information tool covers basic fire protection methods and the general way to produce a fire resistance for structural steel. The layout of this information tool is a simple folder that contains information about the most important steps when producing fire protection for a steel structure.The thesis starts with a general overview of the fire protection needed in buildings to fulfill national legislative and regulatory requirements. To get an understanding of how steel components behave during the influence of fire, a brief overview is presented of the material properties of steel. This chapter also contains a review of previous research in the area.

Before the European construction standards were introduced in January 2011, it was mainly themethod in BBK04 that was used for calculating punching capacity in concrete structures, and in lesscommon cases the method in BHB. The method of BBK04 is easy to use and have had the samestructure since the first was published in 1979. The Concrete handbook method (BHB) where usuallyonly used when a higher punching capacity was needed and the cross-sectional height where fixed,calculations using this method entails more work, but will in return usually give a higher capacity. Italso allows the use of shear reinforcement to increase the cross-section capacity. The method ofcalculating punching shear in EC2 differs largely from the methods of BBK04 and BHB.

Syftet med mitt examensarbete var att få mer kunskap om konkreta material som behandlar multiplikation och division. För att få veta vilka konkreta material som finns att tillgå gjorde jag intervjuer med två lärare som fick beskriva vilka material de använder sig av. Jag valde att observera två elever enskilt då de löste de multiplikations- och divisionsproblem som jag hade designat för studien. Det jag fick ut av undersökning var att det finns många olika material som elever kan arbeta med samt att det är viktigt att de får möjligheten att arbeta med dessa material. Jag kom fram till att lärare bör vara medveten om i vilket område som materialet är bäst tillämpad och att elever behöver använda sig av konkreta material för att lättare förstå uppgiften.