When a municipality is about to realize an IT investment, e.g. an economy system, theywill need to do procurement according to the laws of procurements. To perform suchprocurement takes time and energy from the everyday work at the municipalities, andtherefore they want to make a quick and efficient procurement. Unfortunately it showsthat municipalities do not always make an assessment that is sufficient enough for theirneeds, which can result in an inefficient system in a longer perspective. Municipalitiesthink more often about the hard values such as costs of the investments, and not alwaysas much when it comes to the soft values, like the user-friendliness.

Purpose: This study`s purpose is to investigate the role of a business incubator in the strategic decision situations during the process of a new venture startup. It also aims to explore the methods and instruments the incubator and its advisers applies during the process.Methodology: This study is built on the basis of a hermeneutic approach with qualitative method and abductive design. The empirical material collected consist of interviews from two case studies and secondary data collection from different related sources.Theoretical perspective: The theory in the study consists of the elements of previous research on innovation processes and entrepreneurship. To analyze the data, models and theories related to decision making, incubation, process theories and organizational theories.Empirical foundation: The empirical material consists of interviews and data from two completed case studies. Additionally consist a relatively large part of the empirical data out of a comprehensive information retrieval from various secondary sources such as internet, newsletters and annual reports.Conclusion: The assay was able to detect not just one, but a variety of roles that the incubator occupies at different stages of the innovation process.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.

The aim of this study is to examine the investment decision process for investments that arise due to strategic changes and are of strategic importance to the company. At the foundation of this study is the previous research in this area, done by King (1975) and Bower (1970), which examines the investment process on a more generic level. At the core is the investment decision process pertaining to Projekt X, an investment performed by NordiCorp. Having conducted a case study including six interviews with employees from various parts of the organization, combined with a large number of internal documents, the process regarding the investment decision was carefully illuminated. The results show that in many regards, this process follows the more generic investment process.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This thesis investigates and emphasises on the way students at Växjö police academy describe their socialization into their profession as police officers and the creation of profession identity. The scientist?s main questions are: In what way do the students at Växjö police academy describe their socialization process into the police profession? What role does the organisation play in the socialization process of the police students? How do the students develop their police identity? Which qualities are encouraged? The study is based on qualitative interviews with nine police students, performed in groups of three. Group theory, role theory, and organization theory are applied to the material to provide an understanding through which it is possible to understand the process of socialization. The study shows that there seems to be patterns in the description of a professional identity.

To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.

Purpose: This study`s purpose is to investigate the role of a business incubator in the strategic decision situations during the process of a new venture startup. It also aims to explore the methods and instruments the incubator and its advisers applies during the process.Methodology: This study is built on the basis of a hermeneutic approach with qualitative method and abductive design. The empirical material collected consist of interviews from two case studies and secondary data collection from different related sources.Theoretical perspective: The theory in the study consists of the elements of previous research on innovation processes and entrepreneurship. To analyze the data, models and theories related to decision making, incubation, process theories and organizational theories.Empirical foundation: The empirical material consists of interviews and data from two completed case studies. Additionally consist a relatively large part of the empirical data out of a comprehensive information retrieval from various secondary sources such as internet, newsletters and annual reports.Conclusion: The assay was able to detect not just one, but a variety of roles that the incubator occupies at different stages of the innovation process.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Composers? and choreographers? world of ideas. Aspects of the art process. This inquiry is about the artistic process when composing contemporary music and choreographing modern dance. I have studied three composers? and three choreographers? thoughts about the artistic process and the work that leads to a piece of music or a dance.

The purpose of this essay is to analyse how the leadership and the structure of the organization affect the process of changes within a specific department in Lunds kommun socialdepartment, from the director of social work to the co-workers at Utredningsenheten för ungdom och familj. We aim to answer the following questions;How does the structure of organisation affect the process of change?What do the co-workers and the leaders believe is the best way to engage the co-workers in the change?How does the leaders view their own leadership in the process of change?How does the co-workers view the leadership in the process of change?How does the leadership affect the process of change?To develop an organisation and to make it a functional, change is a necessity. The leaders are they who create the change but the co-workers are they who make it happen. In the process of change, leadership and the leaders capacity to create motivation for the co-workers, is therefore a matter that is decisive to its success.This is a study based on a qualitative method, where the interview is the main source of empirical material.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

During the 19-century a global warming has been observed, which includes increases in global air and ocean temperatures, widespread melting of ice and snow, and rising global sea level. There is a clear connection between emissions of greenhouse gases caused by the human and the increase in temperature. Climatic changes caused by global warming can be stopped trough decreased emission of fossil fuels, for example by an increased use of biogas. Biogas is a renewable energy source which is produced through anaerobic (oxygen free) digestion of organic material. The gas is a mixture of methane (CH4) and carbon dioxide (CO2) and can be among others used as fuel in vehicles.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.