ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

The aim of this thesis is to compare two time periods in thehistory of the university library in Lund and to see whatsimilarities and differences can be found. The two timeperiods will be 1883-1900 and 1933-1950. The methodsused to achieve this will be comparative method with theactor- and structure model and document analysis. Thesubjects that will be analyzed with these methods will bepersonnel and the facilities. The two questions I will try toanswer in this thesis will be: A) What similarities anddifferences can be found concerning the personnel and thefacilities in the two time periods? B) What is therelationship between the actors and the structureconcerning the personnel and the facilities like in the twoperiods?A brief background of what took place in Sweden, LundUniversity and the university library of Lund itself duringour two periods is provided.

Edsbyverken Office Furniture has over the past 100 years been producing delicate carpentry products, chairs and skiis, but more recently the focus has shifted to furniture for the modern office environment. With a wide selection of products and its characteristic neutral design, Edsbyverken has an extensive group of clients both in Sweden and internationally. The aim of my C level thesis project was to examine the materials Edsbyverken is currently using in order to develop new designs or product functions. Simultanesously, I also wanted to verify whether the method I developed for this project - to initially undertake a comprehensive study of the chosen materials and thereafter specialise on a certain product and target audience ? was effective and successful.

Data retrieved from airborne laser scanning represents a new source of forest data. Today, the technology has matured so that it can function in an operational environment. The aim of this study was to compile areas of application of laserdata in forestry. Moreover to analyze costs and accessibility of laserdata. The goal was to provide private forest owners information to support assessments of possible benefits of laserdata.

Företaget Jakt & Skyttesystem AB har ett portabelt viltmålsskyttesystem som de vill utrusta med elektronisk träffmarkering som klarar av vapen av olika kaliber. Målet för projektet är att utvärdera och utveckla metoder för träfflokalisering i tavelskytte. Vi valde att utreda sensorsystem som inte begränsas av vapen med låg anslagsenergi. Därför har vi valt att endast utreda teknikerna ljudlokalisering i luft och fasta material samt bildlokalisering. Som utgångspunkt för projektet studerades hur befintliga skyttesystem fungerar, vilken sensorteknik och vilka material som används.

The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.

Examensarbetet utfördes på Saab Dynamics, ett företag där man har framtagning av bland annat understödsvapen. Produkterna är under ständig förnyelse och utveckling, i strävan efter ständig förbättring. Projektet handlade om att undersöka möjligheterna att ta fram tändsystemsdetaljer till ett lägre pris med funktionsmässigt tillräckliga egenskaper. Under arbetet undersöktes en rad olika tillverkningsmetoder och material teoretisk för att finna lämpliga alternativ till ersättande framtagningsmetoder. Bland annat analys av precisionsgjutning i zink, ett förslag som redan var under diskussion på företaget.

BakgrundMatematik är något som finns omkring oss hela tiden. Förskolans läroplan har under år 2010 blivit reviderad och blivit mer tydlig i vad både förskollärare och förskolans arbetslag skall sträva efter för att utveckla barnen inom matematisk begreppsbildning. Barn stöter på matematik i vardagen när de leker och använder sig av olika material, vid dukning och när de äter. Men för att barnen skall förstå att det är matematik de håller på med, behöver pedagogerna ha på sig sina ?matematikglasögon? och synliggöra matematiken i vardagen på ett lustfyllt sätt.SyfteSyftet med denna undersökning är att ta reda på i vilka vardagliga situationer som några förskollärare anser att de stimulerar barns matematiska begreppsbildning, vilka material som används vid dessa tillfällen och vilka kunskaper som de menar att barnen får möjlighet att utveckla.MetodVi har valt att använda oss av kvalitativ metod.

Denna undersökning handlade om mobila förskolans verksamhet där barnen hade möjlighet att vistas på varierande platser i naturen. I studien lade jag fokus på barnens egna initierade aktiviteter som skedde på olika platser och i olika miljöer och deras interaktion med naturen. Syftet av detta arbete var att undersöka betydelse av den mobila förskolans platsvariation när det gäller barnens egenvalda aktiviteter i naturen. I undersökningen används följande frågeställningar:? Vilka aktiviteter väljer barnen på olika uteplatser och i olika miljöer?? Hur använder de miljö och material?? Vilken betydelse har variationen av plats och miljö när det gäller barnens val av aktiviteter?För att få svar på frågeställningarna åkte jag under en fyra dagars period i en buss som hörde till en mobil förskola och observerade barnens aktiviteter i varierande miljöer och platser med hjälp av ett observationsschema.

The purpose of this essay was to find out if it is possible to:? Detect different groups of gender among children in grave materiel and church art and if that was the case, in what way?? What different groups of children can be seen in these two categories?? What does the material say about children's position in society? The time span is from early Christian time to 17-th century and the geographical region is Sweden and Denmark. I got my information from published literature and different pages on the Internet. The conclusions were that gender among children can be detected in both types of material but different groups were not ?visible? to the same degree.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

Eyjafjallajökull is made of textile, ash and pigment. Itis a publication which tells the story of the ash cloudthat stopped Europe. The primary goal of the projectwas to use textile as material and screen printing asmethod to present the story of Eyjafjallajökull. Theaim was to examine the relationship between artand graphic design. As the material and printingmethod was set from the beginning the processwas inverted: The information needed to fill thepublication was produced to fit the presentationand not the other way around.

This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

Ever since its conceptual birth, the questioning of consequences due to the implementation of ideas from the reformation doctrine, called New Public Management, has been a common occurance among those who have dedicated themselves to research in superior methods of Public Administration. What this thesis aims to do is shed light upon what value-conflicts may occur within public administration organisations when they begin to idealize the rationalization of economic issues. The goal of this thesis will be fulfilled through the creation of two ideal types of public administration that exist in opposition to each other. These two ideal types will show two different views on how decision-making and organisation will be managed in their respective sectors. By doing this, there will be clarification as to what conflicting values arise with the implementation of ideas taken from New Public Management, as well as defining the fundamental difference between which ethical decision model is used..

Studies of the information needs of library patrons are necessary in order for the library to serve the community. Alas, studies of non-heterosexual persons are rare in the field of Library and Information Science in Sweden. This study aims at examining the information situation of women in same-sexed parenthood by means of analysing their situation as norm-breaking. The study is done through examining the specific information needs of this group, how they seek and receive information, what barriers they encounter and what function the library has in this information situation. A queer theoretical approach to heteronormativity in combination with McKenzie?s two-dimensional model of information seeking is used to perform a qualitative analysis of the material.