This work is a part of the project ?Våtmarker i odlingslandskapet ? uppföljning av miljömålen? (Wetlands in arable land ? following-up of the environmental goals). The main objective with this project is to study nitrogen and phosphorus retention in a constructed wetland by using mass balance calculations. Continuous measurements of nutrients and water flow through the inlet and the outlet of the wetland are made. However, substantial amounts of nitrogen and phosphorus were assumed to reach the wetland with a drain-pipe transporting wastewater from nearby houses (10 persons).

Today's technology offers a variety of opportunities to interact with the interactive systems. Human-Computer Interaction in the last decade is the area of research that has contributed the most to this development. But how is this interaction perceived? The user experience is something that is formed by the interaction between human and the computer interactive systems. The objective of this thesis is to investigate how the user experience differs depending on how one interacts with a game.

For Swedish companies to compete with low wage countries, developments in theproduction industry moved towards streamlining the entire company. One of themost effective ways for a company to streamline their operations is to review theirproduction. All companies have processes in their production that add no value tothe product. In order to compete, they must be eliminated.The purpose of this report is to reduce work in process (WIP) in the flow ofbashus at Volvo Powertrain in Köping. The aim is also to try to find reasons whyVolvo Powertrain feel that they have problems with the storage principle First in-First Out (FIFO).To meet the objective, empirical studies were conducted at the company whilethe literature in the area was studied.

A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

Syftet med mitt examensarbete var att få mer kunskap om konkreta material som behandlar multiplikation och division. För att få veta vilka konkreta material som finns att tillgå gjorde jag intervjuer med två lärare som fick beskriva vilka material de använder sig av. Jag valde att observera två elever enskilt då de löste de multiplikations- och divisionsproblem som jag hade designat för studien. Det jag fick ut av undersökning var att det finns många olika material som elever kan arbeta med samt att det är viktigt att de får möjligheten att arbeta med dessa material. Jag kom fram till att lärare bör vara medveten om i vilket område som materialet är bäst tillämpad och att elever behöver använda sig av konkreta material för att lättare förstå uppgiften.

Abstract This qualitative interview study focuses on job coaching by examining what thoughts, views and opinions the involved parties, such as job applicants and job coaches, have of the contribution. The aim is to highlight the obstacles and opportunities by examining the expectations that exist from both parties as well as how to look at job coaching and its different areas. In this context, examine the similarities and differences between the two parties approach to the contribution. This is made possible through four interviews with job applicants as well as four interviews with job coaches. A grounded theory inspired approach was used to obtain the results of the study.

This thesis has been performed at Uddeholms AB with the purpose to investigate theparameters affecting the formation of inclusions during the manufacturing of a low carbonmanganese-steel.A follow-up, steel and slag sampling and evaluations in microscope have been done for a totalof five heats.The results for each heat have been evaluated in relation to the theory from the literaturesurvey and suggestions for changes in the process to reduce the amount of inclusions whichhave a negative effect on the steel quality have been given.The project extends over a large process where many parameters affect the formation ofinclusions. However, a tendency that a higher addition of alloys seems to increase the totalamount of inclusions before and after the vacuum degassing is seen.The majority of the studied inclusions seem to approach the composition of the top slag aftervacuum degassing. Ladle glaze may cause the inclusions which had a different compositioncompared to that of the slag.A high or low ladleage together with a high argon flow during vacuum degassing seems todissolve particles from the refractory which later on get trapped inside the inclusions.The floatation for two heats has been studied where a short floatation seems to give a higheramount of inclusions in casted material.In machined material so called stringers were found. The main composition of those stringerswas pure alumina. Inclusions with a composition of pure alumina were not found in the liquidsteel, thus the pure alumina inclusions must be formed during the casting.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

The main focus for this essay is to describe the relationship between human and nature through a material investigation that takes its shape through sculpture. With the help of a fairytale-like story the reader can share the creation of the sculpture and how my thoughts flow through the process that will result in an exam project. Rooted in earlier projects I discuss the crash between civilization and the wilderness as well as talking about the likeness of the creative process and child play. I also discuss the body's place in the forest and the loneliness that we humans created that has cut us off from the rest of the creatures and plants in the forest. My aim is that in the final piece I will create a fiction place where these can be joined together again.

Syftet med examensarbetet är att ta del av förskollärares åsikter om och erfarenheter av materialets betydelse för barns lek och lärande, med fokus på ?smutsigt? material i innemiljön. ?Smutsigt? material är material som kan skapa oordning och kladda ner, t.ex. vatten, sand, lera, färg m.m.

At Forsmark nuclear power plant a new course called "education in everyday safety" has been started in an attempt to improve the safety culture. The goal is to spread the of expectations and approach the maintenance management has set, to all employees working at the plants. During the course, theory is mixed with practical tasks to reach a common view how work should be done to achieve safety for the plant and the people that work there.The practical tasks are done inside "maintenance simulators". They are built inside 20 ft containers which contains two dummy pipe systems. On the pipe systems some valves, a flow meter and a pump has been installed.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.

Title: The appraiser?s choice of valuation method ? factors that influences the choice of company valuation methodsSeminar date: 04/06/07Course: Master thesis in Business Administration, 10 Swedish credits.Authors: Anne Benedicks and Veronica ÖbergAdvisor: Eron OxingProfession of category: Financial analysts, auditors and company lawyers.Key words: Company valuation, valuation methods, cash flow analysis, comparative valuation, the net asset value method.The Main Issue: What is of decisive importance when choosing a special company valuation method?Purpose: The purpose of this paper is to identify, analyse and evaluate the most common methods of valuation for financial analysts, auditors and company lawyers and those factors that influences the choice of method.Method: A multiple survey has been implemented for the actual profession categories. Primary data was collected through semi-structured interviews and a questionnaire survey.Theoretical: The theoretical frame of reference is based upon the paper?s dependent variable, i.e. the role of the appraiser.

Logistics is an important concept in the organizational context in which the planning of flows, services and products are treated. Logistics handles supplier management, supply of materials, production and distribution. The distribution of goods can be managed with different types of transportation depending on price and time aspects. The lowest transport cost for larger amount of goods is by maritime shipping. A common carrier used in transportation of goods is a standardized ISO- container.

Dagvatten kallas det regn- och smältvatten som rinner av från hårdgjorda ytor i stadsmiljön. Detta vatten för ofta med sig stora mängder av föroreningar som tungmetaller, näringsämnen och oljerelaterade ämnen, vilka kan göra stor skada om de når recipienter. För att rena dagvattnet och därmed minska föroreningsbelastningen byggs det allt fler öppna dagvattensystem som t.ex. våtmarker och dammar. Studier har visat att dessa system har hög reningseffekt och dessutom är de kostnadseffektiva.