The work with this report has been focused on developing a methodology model for control at purchase. The methodology model covers parts classification, dispatching systems, batch shaping and more. The aim with the methodology model is that it will be used as an aid for a cost effective material planning to increase the value for customer.The work covers also a description of the present situation and the purchase process at Company X. Six parts have been applied, two from each class (A, B and C), in the methodology/model. The parts that have been applied are included in the flow between Company X and their supplier Company Y.Data have been collected trough literature studies, interviews and the company?s business system.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

Since 2004, wind power has had the largest installation of new capacity compared to other energy sources in Sweden. Accommodating new wind power may require strengthening or rebuilding of the existing grid in areas where the grid is already loaded to maximum capacity. This master thesis examine the possibility of a new 400/130 kV substation in Yttermalung, Sweden, with a connection to the two neighboring regional grids in Dalarna and Värmland owned by Fortum. This substation would provide a new connection point to the Swedish transmission system as well as an interconnection of the two, currently separated, regional grids. Different expansion scenarios where a substation with and without series compensation or a phase shifting transformer (PST) to control active power flow were studied.

Husqvarna AB operates two warehouses located in the area of Jönköping. The most important task is to manage the large volume fluctuations during the peak season. DHL Exel Supply Chain (DESC) run the warehouses and the domestic transportations is outsourced to DHL Express. A number of forwarder agents are responsible for distributing the export gods. In the present situation a bottleneck occurs at the warehouse loading section, and the consequence is fulfill the time of delivery for all customer orders.

In the year of 2009 the conditions for managing primary healthcare in the region of Västra Götalandchanged. The decision was taken by the regional assembly and resulted in that the citizens since thenhave had the opportunity to choose which health care provider they preferto stay with. Along with thisdecision a new market for private health careproviders was established, which resulted inincreasedcompetition between the providers.In order to manage the competition, the health care providers arenow forced to be more efficient in their operations andalso to beeven more focused on their patients.Backa Läkarhusgruppen is an example of a private healthcare provider in the region of Västra Götaland.In the same way it is also an example of anorganizationin need of analysing their operations to seehowit can be further optimized to meet patient needs and expectations.The aim of this study is to analyse Backa Läkarhusgruppen?s organization and its operationsin the hopeoffinding suggestions whichwill improve the patient flow.To allocate and solve the problems thatBacka Läkarhus suffer from,an approach inspired by Lean Healthcare is used throughout the report.Some of themost significant problems that were identified within the organization are:?The synchronization of demand and capacity is inadequate.?Absence of standardized routines.?Absence of present leadership.To be able to improve the patient flow Backa Läkarhus needs to handle these identified problem areas.By synchronizing the staffing level in relation to the trends in demand a reduction in the patient?swaiting times and throughput time will be possible. Creating clear responsibilities and routines for thestaff will contribute to a higher degree of patient focus and thus lead to a more efficient patient flow.

In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

A district heating plant has the advantage that it can take advantage of the waste heat from industries and use of cheap fuels to produce heat. But for the long term is competitive requires that energy is also saved in district heating plants. One way to save energy in a district heating system is to increasing cooling to the return temperature. This leads to less power needed to drive the distribution pumps,  and that more energy could be extracted from the same amount of fuel by an improved flue gas condensation.In Karlskoga the return temperature into the district heating plant is high. They would therefore reduce the return temperature in order to extract more energy from the flue gases.

Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.

This thesis has the overall objective to develop the optimum sealing system between the retarder and transmission. Today, there is a pressure-relief and two radial seals separation between the retarder and transmission. It has been found that carbon residue formation may occur between retarder axle and seal lips with, in some cases, leakage as a result.We have in this thesis tried to explain the phenomenon of carbon residue, how it is formed and why it can be seen just on the seals? A rig test was conducted where we show how friction, speed, transmission temperature and mitigation phases of the retarder affects temperatures in the sealing environment. Factors affecting the coke structure are reported, together with proposals for measures that provide a mitigating seal environment.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

Lerbodaälven is a river in the municipality of Kil which, due to high phosphorus content is not meeting the requirements for good ecological status according to the Water Framework Directive. The purpose of this report is to investigate the causes for the high content of phosphorus that has been measured in Lerbodaälven between 1995-2010. Four questions will be answered in this report. 1. Does the sewage treatment work affect the phosphorus level in Lerbodaälven? The result from the time series analysis shows that the sewage treatment works have a small impact on the phosphorus level in Lerbodaälven.

AbstractAim: The purpose of this thesis is to research how women think about fashion in relation to their self and to others. Can clothes be an expression of who we are who we want to be and how we look at others? What are the main characteristics in this type of communication and what kind of information can be distributed using this tool?Method/Material: InterviewsMain results: Clothes can work as a tool to show who we are and what we are, mainly on short term. We use clothes for different purposes, sometimes we what to be seen and really show who we are and what we stand for and sometimes we just what to go with the flow and not be seen at all. We will always have a physical need for clothes but it is also a natural and important part of our individual expression and our identity.Keywords: Fashion, Clothes, Identity, Lifestyle.

Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

Syftet med denna uppsats är att utreda vilka faktorer som påverkar de svenska småhuspriserna, och i så fall hur och i vilken utsträckning. Med stöd av tidigare studier som enhetlig pekar ut bolåneräntan och disponibel inkomst som de faktorer vilka har tydligast inverkan på fastighetspriserna i Sverige, utökas de förklarande variablerna i denna studie med hjälp av en stock-flow modell. Tidsseriedata från 1993-2013 behandlas för enhetsrötter och kointegration för att skattas i en regressionsanalys i form en "Error Correction Model", med avsikten att utreda både ett kort- och långsiktigt samband. Resultatet bekräftar reporäntan och disponibel inkomst som två viktiga faktorer för att förklara det långsiktiga sambandet med priserna på småhus i Sverige, tillsammans med ytterligare faktorer såsom BNP, hushållens skuldsättning och arbetslösheten. På kort sikt är dels den historiska utvecklingen av huspriserna en nyckelfaktor, men faktorer som disponibel inkomst, ränta, BNP och hushållens skuldsättning är också viktiga krafter för att förklara småhuspriserna.

Handling product returns has become a critical activity for organizations as the volume of gods flowing back through the supply chain rapidly increases. Few research studies have published specific empirical data concerning the reverse logistics practices of companies. Information technology and information support has long been recognized as a competitive weapon ? capable of enhancing company performance and achieving efficient reverse logistics. Reverse logistics is very unlike the forward, as it is more reactive and also has less visibility.