The aim with this master's thesis is to describe the work process with the graduation film Player, by a composers perspective and given conditions. It provides a detailed insight into how the work was done from the script stage to the end result, scene by scene reflecting about both the musical performance and the collaboration between the director and me as a composer. The work was done during the spring term of 2012 at the Royal College of Music in Stockholm and Stockholm Academy of Dramatic Arts..

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

This study focuses the development on the protection of landscapes with old industries and how it nowadays is appreciated by the inhabitants. The overall aim of this study is to increase the knowledge about how the so called industrial landscape in Norrköping became a cultural heritage that the citizens want to protect. The study also aims to investigate the citizens´ knowledge about the industrial landscape in Norrköping, and what value they think that the place possesses. Data was collected by an information research and six qualitative interviews. The interviews where analysed by qualitative methods techniques.

Powdery mildew is a serious problem in both field and greenhouse cucumber production and can cause serious infection and radically reduced yields. Today, powdery mildew is the main disease in greenhouse produced cucumber. Disease control should preferably be both efficient and environmentally friendly, which is not easy to achieve at all times. Alternatives to chemical control of powdery mildews are biological control, physical control, non-fungicide control and cultivation of resistant or tolerant varieties. Biological control can be described as the suppression of damaging activities inflicted of a harmful organism by one or more other organisms, which are called antagonists or natural enemies. In Sweden, there are currently no registered biological control products available to control cucumber powdery mildew. The aim of this study was to investigate the effect of two biological control products in order to evaluate their ability to prevent or reduce powdery mildew infection to an acceptable level in greenhouse produced cucumber. In the experiments, different application regimes were also studied.

This paper explores the field of virtual reality and how immersion and presences can be increased when it comes to navigation and interaction with Virtual Environments. The availability of VR technology has sparked a trend, especially in game development. Old ways of designing for interactive environments have to be revised. This is done by exploring the massive body of work done on VR, exploring its underlying concepts, using tested design techniques and ways of evaluating interaction for VR. A design suggestion in the form of utilizing a tablet device as the main input device is derived.

The aim of this project was to improve taste of a liquid food product, comprising extremelybitter and unpalatable amino acids and one unrevealed ingredient. The amino acids were Lleucine,L-isoleucine, L-valine, L-threonine and L-lysine monohydrochloride. Experimentaldesign was set up as a screening of water solutions comprising these ingredients (called BCAAsolutions) and added ingredients with potential to improve flavour. BCAA solution withingredients that were potential bitterness suppressors were evaluated in flavour, bitternessand/or palatability. Solutions of separate amino acids were also studied.

The capricious roman goddess Fortune is known for her strong power to influence or even decide the destiny of humans. In ancient Rome she was considered to be a good goddess, who brought the gifts of destiny and who also was seen as a possible ally. During the Middle Ages this position changed. Fortune was given two sides, a good and friendly one and a cruel impenetrable side. She was seen as one of God´s ministers and became an expression of divine providence.My purpose with this essay is to analyse three artworks of Fortune by Giovanni Bellini, Albrecht Dürer and Master MZ, but also some texts by the renaissance humanist Niccolò Machiavelli.

On board ships different type of maintenance activities take place. Some of those require working with vibrating handheld tools. Traditionally there is a high awareness of the risks with different type of duties such as protecting the skin from oil or other chemicals, the eyes from splashes and hearing from high noise levels. The experience we have from our time as on-board cadets are that there is less information about vibration hazards available compared to the information concerning other hazards on board.There are threshold values that workers, by law, are not allowed to exceed when working with handheld vibrating tools. The purpose of this study is to investigate how common the use of this type of equipment that can cause damage by vibrations, to the hands and arm amongst the deck crew, and if the crew informed about the risks involved.

Detta examensarbete har utförts hos Vattenfall Eldistribution på avdelningen Kontroll och Skydd med målsättningen att utforma och utvärdera en nätmodell avsedd för jordslutningssimuleringar i PSCAD. Ombyggnationen från luftledningar till markkablar har medfört att kapacitansen i distributionsnätet ökat, vilket ställer högre krav på jordfelsutrustning och på nätanalyser för att kunna försäkra att en säkerställd frånkoppling kan ske enligt de myndighetskrav som föreligger. Syftet med arbetet har varit att undersöka hur en nätmodell bör utformas för analys av stationära in-svängningsförlopp och utvärdera hur stor noggrannhet som kan förväntas gentemot verkliga jordfelsprov vid felresistanser på främst 3 k? och 5 k?. Nätmodellen har ut-formats efter ett verkligt impedansjordat mellanspänningsnät med ?-länkar i PSCAD och utifrån de nätuppgifter som förekommer i Vattenfalls näthanteringsprogram Netbas.

This Master?s Thesis deals with a special problem that may be of importance when planning a frequency hopping mobile communication network. In normal cases the Frequency Assignment Problem is solved, in order to plan the use of frequencies in a network. The special case discussed in this thesis occurs when the network operator requires that the frequencies must be arranged into groups. In this case the Frequency Assignment Problem must be solved with respect to the groups, i.e.

The purpose of this master's thesis is to discuss how young people view their possibilities of exercising power and influence in Swedish society and politics. To accomplish this we have used several different sorts of relevant material. As an introduction, we review the development of the Swedish research concerning youths, with focus on the development in the last two decades of the twentieth century. We continue with a study of important Swedish youth-political documents, especially of the Government Bill På ungdomars villkor: Ungdomspolitik för demokrati, rättvisa och framtidstro On the terms of the youth: Youth-policy promoting democracy, justice and hopes for the future. The Bill is the foundation of a new youth-policy in Sweden.

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

The Master of Science in Energy Systems Engineering program at Uppsala University started in 2000 and 221 students has graduated since. This master thesis aims to answer what competencies alumni considers most important for successful professional practice. It also seeks to find out how these competencies are reflected in the program to identify potential gaps between importance and how the competencies are being prepared. With inspiration from similar research a method has been developed consisting of two steps: (1) A survey and (2) interviews with alumni. The alumni survey rates the professional importance of 13 competencies and how well the corresponding competency is prepared in the program.

The aim of this master?s thesis is to investigate a information center called ?Infoteket om funktionshinder?. The purpose of Infoteket is to collect information about disabilities and make it accessible to people with disabilities, their relatives and public. In this survey I will analyze how Infoteket can help people with disabilities to achieve empowerment. I use empowerment as a theoretical framework as Jay A.