Background: Media has for a long time been reporting about the audit industry, often focusing on so-called auditing scandals. Economic journalism has grown stronger, the corporations are given more and more power in society and the public interest is increasing. We intend to examine how mass media affects the expectations gap and how the auditing firms operate strengthening the society?s confidence in the industry after mass medial exploitation. We also want to investigate whether the relatively new phenomenon social media is affecting the auditing firms and industry?s external communication, as well as what consequences negative publicity may have for the individual auditor.Aim: The aim of the study is to create an understanding of the audit industry?s relation to the media as well as to describe and analyze how mass media?s coverage is affecting the audit industry, auditing firms as well as the individual auditor.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

The aim of this study was to examine if the predictions of the herbage quality in the software Grazemore Decision Support System (DSS) gives a reliable ground for milk production in the north of Scandinavia. Pasture samples from one research farm (Umeå) and one organic farm (Nordingrå) was analysed on crude protein and organic matter digestibility. The results were statistically compared to the predicted values. Measured and predicted herbage mass was compared and a control if the predictions of milk production improved if the predicted input were replaced by the values from the analysis, was made. The concentration of crude protein was underestimated by the model on both farms and the relationship between actual and predicted values was poor. Mean Prediction Error (MPE) was 24% and 31% respectively.

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

During the time of membership in The European Union Swedish domestic policy has gone through many changes. A lot more political areas are being influenced by the EU policy. Today every ministry has got some sort of EU office. Swedish politicians are functioning on two arenas, domestic and European. At the same time Swedish membership has gone from being highly discussed to being a state of normality.

The intension with the thesis is to investigate how mass communication is adopted as a strategy to increase the membership activity within religious communions in Sweden. In the years past it has shown a decreased activity within religious communion, deliberate strategies have been missing and efforts on resources for less effective strategies have been made. The study has been carried out through a review of existing theory within the field of subject, communication within religious communion and the use of mass communication within religious communion. The Swedish church was chosen as a case, where three persons were interviewed. The result from this study shows that the Swedish church communication operates on several different levels: these are detached and self-determinate.

Den negativa miljöpåverkan från förbrukning av fossila bränslen ökar kravet på förnyelsebara energikällor. Biobränsle är ett speciellt lovande alternativ. Detta projekt vill visa på möjligheten att använda gas från biobränsleförgasning som förbränns utan synliga flammor i glassmältugnar. Med bättre teknik är det möjligt både att upprätthålla produktionen och reducera kväveoxidutsläppen med ekonomiska fördelar. Biobränslena bidrar inte till växthuseffekten.

This paper aims to investigate the embalming process and the Balanites aegyptiaca from two pottery originated in ancient Egypt. The two objects were from Medelhavsmuseet in Stockholm. Samples were collected and analyzed with Fourier transform infrared spectrometry (FTIR) and Gas chromatography/mass spectrometry to identify which components the samples contained. The results show complex mixtures mainly consisting of resin origin from Pinaceae and the vegetable oils from the Balanites aegyptiaca..

This master thesis was a subtask of a project called EMIR-1. The goal with the thesis was tobuild a system for particulate mass measurements in one of the engine test cells at KTH. Theparticulate mass measurements are planned to be measured with a TEOM.The exhaust gases must first be diluted with air before the sample is sent to the TEOM.Therefore an ejector diluter for this matter also was designed and evaluated in the thesis.Emissions measurements have been done both with and without dilution to determine thedilution ratio. Tests have been done for different speeds and loads.Problems with stability of the dilution ratio have been an issue throughout the process andpressure pulsations in the exhaust pipe are believed to be the cause. More tests have to be done tomake sure that this is the problem.One idea is to make the inner diameter of the diluter nozzle smaller and see if it changes thedilution ratio stability.

This study is about how a swedish brand within the food industry that experiences a crisis following a product failure. It focuses on three areas following the crisis and these are crisis management, recovery strategies and brand management. This study seeks to explain how these areas interact in relation to massive exposure to mass media and how they interact restore the brand's potential loss of reputation. This study was conducted as a case study with a deductive and qualitative approach. The data gathered to this study was mainly based on newspaper articles and complemented with semi-structured interviews with twelve local retailers of the brand..

I approach the subject of adult readers of young adult fiction through an analytical framework influenced by Cultural Studies, implicating that young adult fiction is caught up in a system of distinction between popular literature and high literature. I contrast this with theories that suggest that there has been a loosening of this hierarchy and that they now coexist, even borrowing features from one another. I also examine questions of ideology, namely the ideology of mass culture, the ironical attitude and the ideology of populism. I also use Andreas Huyssen?s theory of mass culture as a woman, seeing as popular literature often tends to be categorized with feminine traits.

Honey is a product that may contain pesticide residues due to contamination from bees pollinating various plants as well as elimination of vermin inside the hive. Different methods are needed for analysis of pesticides, since the term includes a wide range of different substances. National Food Administration lacks a validated method for determination and quantification of pesticides in honey using liquid chromatography tandem mass spectrometry, LC-MS/MS. The technique is especially important in analysis of polar and non-volatile pesticides, where gas chromatography is not functioning optimally. After investigating what pesticides could be found in honey produced in Sweden, a number of four pesticides suitable for analysis with LC-MS/MS was compiled; boscalid, impidacloprid, tau-fluvalinate and thiacloprid.