A new build in the Swedish nuclear power system would entail increased re-quirements for the proposed repository, which is adapted after the reactors of today. With a fast reactor, capable of burning nuclear waste, operating in parallel with the light water reactors, the increased requirements on the repository could be reduced.In this thesis, simulations of a light water reactor and a fast reactor have been performed by using the Monte Carlo code Serpent to investigate the changes in the fuel inventory. The light water reactor in the study is a boiling water reactor and the fast reactor of the type sodium-cooled fast reactor and they have been used for three different operation scenarios.By studying the fuel composition and the results from the simulations of the three scenarios conclusions can be drawn. Conclusions regarding the change of the fuel inventory and decay heat in Clab as well as the interim storage facility and in the repository. Depending on the operation alternative the changes dif-fered significantly and especially regarding the mass of burned actinides for different fuels in the fast reactor.The lowest increase of fuel assemblies was meet when using 50 years old fuel with 20MWd/kg U burnout and 2,0 % enrichment for start up of the fast reactor and 30 years old fuel assemblies with 50MWd/kg U burnout and 4,7 % enrichment for the further operation of the reactor.The increase of the number of fuel assemblies was 3174, which is equivalent to 641tons of heavy metal.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

The purpose of this study is to examine the medial depiction of Muslims in the case of Pastor Terry Jones' intention to burn the Quran. Our study is based on theoretical framework regarding an alleged clash of civilizations, how that leads to global conflicts and controls the world politics. It?s also based on the western way of characterize Muslims as violent, irrational human beings, and how mass media have a tendency to depict Muslims as ?the others?. The questions we aim to seek answers to are: How were Muslims portrayed in CNN's and Al-Jazeera's reporting regarding Terry Jones plan to burn the Quran? Which discourses exist about Muslims in each news channel and what are the main differences between them? The qualitative method used is a critical discourse analysis on empirical data consistently of twelve articles.

Kryssningsindustrin är en dyna-misk bransch som är under ständig förändring och utveckling. Branschens stora problematik är avsaknaden av en färdigproducerad produkt på kryssnings-destinationerna. Alla människor, platser, företag och organisationer som kryssnings-resenären kommer i kontakt med på destinationen är med och påverkar resenärens helhetsintryck. Detta innebär att samverkan mellan olika aktörer är nödvändigt för att skapa en attraktiv och konkurrenskraftig kryssningsdestination. Samverkan genom kluster handlar om att tillsammans nå gemensamt uppsatta mål och visioner, samt att ta tillvara på de olika resurser, människor och relationer som interagerar på en kryssningsdestination.

Since their invention in 1999, CubeSats have become a widespread standard for small picosatellite missions. CubeSats allow for quick development of satellite payloads and launch in space without the high costs of a normal satellite. Emphasis during the CubeSat design process is placed on use of commercialoff- the-shelf (COTS) components and reuse of previously-designed units.This report describes the interfacing of a scientific magnetometer, the Small Magnetometer in Low-Mass Experiment (SMILE) to such a CubeSat mission, the Space Weather using Ion spectrometers and Magnetometers (SWIM). Design of a complete platform for use in multiple such missions is presented here.Modularity is one of the key aspects followed in the course of the work. A new board containing the analog pick-up and compensation circuitry for SMILE has been designed to fit inside a CubeSat frame.

During the transportation of logging residues (LR) the material´s low density is a problem that results in low use of pay-load capacity. Comminution or compression of LR are possible methods to increase pay-loads. In the present thesis studied a bundling machine which was mounted on a truck chassis, and the subsequent transport and crushing. The truck bundler created bundles that were larger and longer than other bundling equipment on the market. The objectives were to determine the total time consumption and its allocation over work element and machinery, to measure dry matter (DM) content of green and brown LR-bundles.

Övervikt och fetma hos förskolebarn har ökat i alarmerande takt de senaste 30 åren. Det finns många faktorer som bidrar till att utveckla övervikt och fetma som exempelvis mindre fysisk aktivitet, alltför energirik kost, stress, låg social status och föräldrarnas BMI (Body Mass Index). Övervikt och fetma kan orsaka negativa konsekvenser som blir både kort- och långsiktiga hos överviktiga barn och i framtiden som vuxna. Studier har visat att tidiga insatser är nödvändiga för att förhindra allvarliga följdsjukdomar såsom t.ex. diabetes och hjärta/kärlsjukdomar.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

Thermia Värme AB is one of the market leading manufactures of heat pumps. In order tomaintain this position, the company wants to improve the vibration characteristics of theirproducts. The aim of this thesis is to develop product design changes that lead to a reductionof vibrations in the heat pump Thermia Diplomat 8.The main cause for vibrations in the system is flow pulsation and mechanical forces inducedby the scroll compressor. Vibration is transmitted through the compressor piping and receivedby the heat exchangers, from where it is further transmitted to the connection points for theradiator and heat source circuits.A number of design changes in order to improve the vibration characteristics have beenevaluated through calculations and practical experiments. The changes have included thecompressor and heat exchanger mountings, the compressor suction and discharge line pipingand also pulsation dampening.The results of the experiments show that the vibration levels in the connections for the heatingand brine circuits can be decreased strikingly through changes in suction and discharge linepiping.

Today there are no analgesic drugs approved to be used in goats. Drugs approved for use in other species are consequently being used without knowing the pharmacokinetics of these drugs in goats. The purpose of this study was to investigate the pharmacokinetics of the opioid butorphanol when given subcutaneously in goats. Subcutaneous administration might extend the half-life compared to intravenous or intramuscular administration. Eight clinically healthy, non-pregnant 6 months old female goats were used.

Smallholder farmers in Uganda suffer from declining productivity. With a rapidly increasing population, marginal land is taken into production and the current land management leads to loss in soil fertility and escalation in soil erosion. There are studies indicating that the use of agroforestry increases soil organic carbon (SOC) compared to systems without trees. Soils which are high in carbon have many advantages, for example better water holding capacity, which can reduce stress on crops during drought. The aim of this study was to determine the effect agroforestry has on SOC concentration in small-holder farming systems in Uganda. The intended system to study was farms practicing agroforestry methods or not in intercropped plantain (cooking banana) fields.

It has become increasingly common for cities and municipalities to take greater account of the place marketing, and to see the physical location as a brand. An early step in this process is to make the image measurements of the place, in order to develop better marketing strategies. A method often used in tourism research for this type of measurements is Etchner and Ritchie's theoretical framework. The framework is initially designed to measure visitor's image of a tourist destination.Almost all previous research in this area is based on the visitor's perspective, but Olofsson and Skredsvik have used this framework to measure a location's image among the residents. They feel that the residents of a place can be seen as ambassadors of the place because they know the site well.

Many sources point to the same conclusion; throughout the history the research sphere, mass media, governmental industry policies and public life in common have not paid the same attention to medium-sized companies as to small, new or large companies in Sweden. Yet, there are some researchers claiming the need for the medium-sized companies to grow, becoming tomorrow?s Swedish new large companies. Hence, the need for understanding the specific growth conditions of the medium-sized companies are definitely clear. This study aims firstly to identify whether there are specific requirements and obstacles for growth in connection to being a medium-sized company.

This essay examines resident experiences and notions of the Gotland countryside and their ideas about the future. In particular the countryside is studied as both space and place. In space and place people interacting. People are therefore important components in the study of the landscape. One can say that the landscape and the interaction between people affect resident experiences and notions of the countryside, as well as people certainly affect the landscape.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.