This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the Mass flow of the material being tipped.

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

Svenska befolkningens hälsa började på allvar att uppfattas som en samhällelig angelägenhet redan under 1700- talet och idag tar det sig uttryck i bland annat mätmetoder som BMI (Body Mass Index), vilket avser att undersöka befolkningens hälsa. Inom BMI området kan en brist på forskning upplevas på bland annat BMI:s påverkan. Människan tillbringar allt mer av sin vakna tid till medier, både professionella och privata aktiviteter fyller människans liv och dessa genomsyras av medietexter, mediebilder och kommunikationstekniker av olika slag. Syftet med denna undersökning var att beskriva hur BMI diskursen utspelar sig vid läsarkommentarer på internetbaserade tidningsartiklar. Metoden som användes i undersökningen var diskursanalys där läsarkommentarer på internetbaserade tidningsartiklar analyserades.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

Övervikt och fetma är ett snabbt växande folkhälsoproblem som medför ökad risk för psykosocialt lidande och många allvarliga sjukdomar. Särskilt oroande är att övervikt och fetma allt oftare drabbar barn och ungdomar. Syftet med denna studie är att undersöka om det finns ett samband mellan Body Mass Index (BMI) och Känsla Av SAMmanhang (KASAM) hos elever i skolår 9, samt att analysera kön och psykosociala faktorers (familje- och kamratrelationer) eventuella inverkan på relationen BMI och KASAM.Det statistiska materialet är hämtat från undersökningen ?Liv och hälsa - Ung 2004 Västmanland? där KASAM- skalan med 13 frågor används. Analysmetoden är en multipel regression.Resultaten indikerar svaga samband mellan variablerna.

A group of companies that only recently has caught the attention of Swedish designers, enterprises and media are the so -called "furniture pirates". In Sweden it?s mainly two companies that have ended up in the spotlight. The online stores Ikon M and Designers Revolt are two companies which currently sell replicas of famous Swedish and foreign designers. Although the designs sold are copyright protected in Sweden, and most other European countries, the right holders can only stand by and watch as more or less exact copies are sold for a fraction of the price of the originals.The business model - to exploit the EU?s free movement of goods and the UK's short term of copyright protection in matter of mass-produced art (industrial design) - has proven successful for the companies that practice it.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

Syftet med detta arbete är att undersöka hur dynamisk svårighetsjustering påverkar hur spelare värderar ett spels svårighet, presterar under en spelsession och huruvida de kan upptäcka ett system för sådan justering samt identifiera hur det fungerar.  Arbetet vilar främst på Robin Hunickes arbete kring dynamisk svårighetsjustering men vidrör även koncept som svårighet, flow och olika typer av svårighetsjustering. För att undersöka huruvida system för dynamisk svårighetsjustering påverkar spelande har ett plattformsspel utvecklats och speltestats i två versioner av en handfull respondenter, en version som justerar svårigheten i spelet dynamiskt och en som balanserats för hand. Resultatet från dessa speltester ger inga direkta stöd för att dynamisk svårighetsjustering får spelare att prestera bättre och tyder på att spelare vid en första spelomgång har svårt att identifiera system för dynamisk svårighetsjustering. Resultatet visar dock även på att mer undersökningar kan behövas på ämnet i framtiden..

Today, there are a number of different models and methods used to estimate the equity value of a company. A common tool for valuating stock prices is the usage of different multiples. This is a method used to determine the value of a company, by examining and comparing the financial ratios of relevant peer groups. The disadvantage with this method is that it does not take all the important aspects, such as risk, investments and capital structure, into consideration. However, this study investigates if the key value, called discounted cash flow (DCF), can be integrated with the valuation of the multiples.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

Agricultural drainage is widely used to manage the amount of water in the ground in order to improve conditions for cultivation. However the effects of drainage companies on water regimes are considerable leading to runoff changes such as altered stream flows, peak flows and water levels. In a greater extent this could imply an increased risk for floods along affected watercourses. This study analyzes the extension of agricultural drainage within the drainage basin of Trosaån in Sweden by ArcGIS mapping. In a statistical analysis, historical variation in streamflow in relation to mean precipitation and mean temperature are investigated for the study area.

Syftet med det här arbetet var att gestalta fem olika känslor inom genren symphonic metal. Därigenom ville jag avgöra vilka verktyg jag kunde ha nytta av i framtiden för att gestalta känslor musikaliskt och vilka skillnader som finns mellan att gestalta olika känslor. För att göra detta använde jag mig av referenslyssning av tio låtar plus några orkestrala stycken per känsla. Resultatet av lyssningen, tillsammans med olika låtskrivningstekniker, litteratur, Kirnbergers intervallkaraktäristik och Matthesons tonartskaraktäristik, användes till att skriva och arrangera mina fem låtar. Resultatet blev att jag hade lyckats skildra känslorna bra med den metod jag hade använt, men att intervallkaraktäristiken och tonartskaraktäristiken var onödiga; det skulle räcka med mina kunskaper som jag hade förvärvat under utbildningen, referenslyssning och min känsla som låtskrivare. Jag kunde inte heller urskilja några skillnader mellan att gestalta de olika känslorna; metoden var universellt tillämplig..

The aim of this study was to map and date glacial flutings with ice flows deviating from the predominating northwesterly ice flow direction in the southern part of Norrbotten County in northern Sweden, and also to investigate if parts of the glacial landscape are older than previously thought. The traditional view is that most landforms in the area were formed during the late Weichselian (W3). Analysis of the new high resolution elevation model (2 m grid) derived from laser scanning was performed after treating the data with a hillshade tool in ArcMap to reveal terrain features such as flutings. The analysis resulted in a map showing four main groups of deviating ice flows (N-S, NO-SV, SO-NV and S-N) and several westerly ice flows. The majority of flutings with deviating ice flows were found in low terrain.