Sök:

Sökresultat:

33 Uppsatser om Masonry heater - Sida 1 av 3

En r?rspis: och hur den ?r uppbyggd

This thesis researches the construction of the Swedish Masonry heater called r?rspis. A r?rspis has an inner smoke channel system that stores heat and it was developed in the early 19th century alongside the Swedish kakelugn (tiled stove). Unlike the tiled stove, the R?rspis was commonly found in simpler environments and is part of the cultural her itage of the rural population.

Konstruktion av värmeelement

This report aims to describing the work behind the development of a Masonry heater.The Masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

Tillämpning av FRTP Heater

Detta examensarbete som är på avancerad nivå handlar om ett samarbete med företaget Calesco Foil AB. Målet med arbetet är att ta fram nya användningsområden för deras befintliga produkt FRTP Heater (Fiber Reinforced Thermoplastic Heater). Det är en patenterad produkt som är ett värmegivande folie laminerat med glasfibrer. Det vi gjort är en produktframtagning med företagets FRTP Heater integrerad med en lampa som tillsammans bildar ett innovativt värmeelement. Detta har gjorts med fokus på företagets produkt egenskaper.Vi har använt oss av olika produktutvecklingsverktyg för att sammanställa och utveckla arbetet.

Vertikalarmering i tegelbalkar ur arbetsmiljöperspektiv

Statistics of occupational injuries show that bricklayers are among the most exposed, with heavy lifting by far the most common cause of long-term sick leave. Prefabricated brick beams create yet another risk of injuries that can be prevented by auxiliary equipment or alternative solutions. From articles, interviews with masons and from a survey carried out in conjunction with this report, it appears that there are frequently difficulties in the use of available means for lifting and handling. Previous studies on the subject of transverse reinforcement in masonry beams indicate a viable method for bridging large openings in masonry walls. This bachelor thesis delves into whether the idea could be realized in today's brick construction with a view to improving occupational health and safety.

Laserinkopplingselement För XFEL Laser Heater : Från Idé Till Färdig Produkt I Designstadie

Uppsala University is involved in a large international collaborationto build the Laser heater system for the European Xray Free-electronlaser in Hamburg, Germany. In this thesis I describe a laser incouplingdevice into the vacuum chamber of this laser heater all the way fromthe specifications to a completed design.The laser heater is a very important part of the XFEL and thepart described here is a part of the vacuum system needed to couplean external laser into the electron vacuum system and align it withthe electron bunches in order to heat them. The task was started by studying the literature about the basic theory andthe design of vacuum systems. After this study and collection of ideaswith colleagues I started to prepare different concepts to solve thetask. The ideas can be put into two categories, in one case the couplingmirror is located inside the vacuum chamber and in the second caseoutside.

Från ståtlig befästning till vittrande världsarv : En jämförelse av byggnadstekniska metoder för sammanbindning av skalmurar

This is a final year project considering constructional techniques for joining cavity walls. The project is related to an ongoing scientific programme about the restoration of The City wall of Visby located on Gotland. The programme was set by Riksantikvarieämbetet as a reaction to a collapse of the outer masonry wall shell which took place in February 2012.The City wall of Visby is a medieval fortification built out of limestone during the 13th century. The wall is constructed as a cavity wall with two separate masonry shells connected to each other through an intermediate core. During the 14th century the wall was heightened which lead to a higher stress, especially in the outer wall face.

Arkitektur i Mayariket : en jämförelse mellan Palenque och Tikal

The classical age cities of Palenque and Tikal where ones great Mayan bastions with extraordinary architecture.  This architecture still fascinates modern archaeologies and historians alike. Still much of the architecture in the Mayan cities had the same style and function, but could diverse from town to town. This is the case of Palenque and Tikal. They share much of their buildings like temples, palaces and ball courts.


?Han säger det ska stå för efterkommande? Profant gråstensbyggande i Västergötland före 1860 - Exemplet Nääs ladugård

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bebyggelseantikvariskt program15 hpInstitutionen för kulturvårdGöteborgs universitet2013:25.

Utvärdering av den bärande tegel- och betongstommen i en byggnad från år 1916

This Master thesis is about a postal- and telegraphic building in Eskilstuna, Sweden. The construction methods for the specific building and buildings in general from the same time are described. The purpose of the report is to describe the loads acting on the building and how it has been built and why it has been rebuilt during the years. After this, possibilities of reconstruction and adaptation for today?s demands can be evaluated.

Optimering av sotningsfrekvens i biobränsleeldad CFB-panna : panna 5, Mälarenergi AB, Västerås

During the past 30 years the fuels for energy production in heating and power plants have changed. Fossil fuels have decreased in usage whereas bio fuels in Sweden have increased with 60% since the 1970's. Different fuels affects combustion and the release of various substances and particles into the flue gas. This is caused by the diverse components and chemical structures of fossil fuels and bio fuels. When the flue gas leave the combustion chamber and enters the path to the chimney particles in the gas are being transported out of the combustion chamber.

Förfädernas berg? : en tolkning av fornborgen på Halleberg

The essay deals with the hill-fort on the mountain Halleberg, Sweden, its wall design, functionality, dating and its possible function as a central location and a place of worship of the ancestors.The Halleberg hill-fort consists of a 1500 meters long at times cohesive stonewalls which together blocked the mountain from its surroundings. Hallberg's natural vertical scree and cliffs along with the masonry blocked the whole mountain from the surroundings.The hill-forts, with few exceptions are largely not investigated archaeologically and its functionality and role in the ancient society is based on outdated research on the subject. The current archaeological interpretation is that hill-forts served as temporary defense in times of unrest or served as center of power for a social elite. The prevailing view in the archaeological sphere is that the hill-forts had a variety of functions and that its functionality and role in ancient society has varied.Halleberg´s strongest wall sections are at the mountain's south-eastern part where the natural driveway, Storgårdsklev is located. Along with the massive masonry of the walls in Bokedalen Storgårdsklev functioned as the hill-forts main entrance.

Delta X : Utveckling av värmeväxlare

Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

Solvärme till Östersunds Rehabcentrums terapibad : Förstudie av förutsättningar för, - och lönsamhet med, solfångare för att värma terapibadet

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.

Multiplayerspel utvecklat i Flash, Slutreflektion för ?Monsters & Masonry?

Flashspel är en väldigt populär form av ledigt spelande, men det finns fortfarande spelformer som är outforskade. Vi bestämde oss för att göra det ingen utvecklare hittills lyckats med, det vill säga att skapa ett så kallat ?Massively Multiplayer Online Flash Game?. Ett spel som konstant är uppkopplat till internet och lever vidare genom spelarna. Problemet ligger i plattformen.

1 Nästa sida ->