Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about components that were to beused in the project.

The main objective with this study was to investigate so called odd purposes acceptable when registrating property along with how social development affects these purposes, furthermore to investigate how the cadastral surveyors estimates a foreseeable time. Tradition and praxis is used for several obvious purposes such as housing, farming, forests, offices and industry. Praxis is yet to be defined regarding more unique purposes. There is no mention in the law about which purposes are found acceptable to assure the demands on suitability are met. Cadastral authorities are responsible for making sure the division into property units is uniform and rule of law-accordingly.

Purpose: The purpose of this study is to seek understanding, describe and analyse how auditors practically reassure and maintain their independence towards clients.Methodology: The study is conducted with a qualitative method with a deductive approach. The study is based on interviews with both experienced and recently graduated auditors.Conclusion: Our empirical results show that there are economical incentives that contradict the requirements to fulfil the auditor?s independence. The conclusion is that the media view is narrow and biased. Furthermore the auditors agree that an acceptable level of comfort is achieved by offering a high value, being a part of a large network of professionals and the ability to set materiality and evaluate risks. .

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

Spel idag kräver en enorm mängd arbetstimmar för att skapas, därför behövs alltid sätt att spara tid och automatisera processer. Algoritmer för polygoniseringen av skalärfält, som Marching Cubes, har under de senaste åren blivit ett allt vanligare tillvägagångssätt för att automatiskt generera terräng. Scenkomplexiteten och kraven för visuell kvalitet i dagens spel ökar ständigt. Därmed kommer också kravet för prestandaeffektiva renderingsmetoder. Deferred rendering är en renderingsmetod som kan hantera scener med stora mängder ljuskällor och hög scenkomplexitet samtidigt. För att undersöka integreringen mellan procedurellt skapad terräng och en deferred rendering pipeline, skapades en applikation i DirectX 11 för att undersöka implementeringen och potentiella optimeringar av denna integration..

Designingenjörsstudenten Matilda Kälström har på Tibroköks uppdrag utvecklat ett sortiment för walk-in-closets där målgruppen för projektet är företagets befintliga kundkrets. Under projektets gång har en grundläggande förstudie gjorts för att bland annat ta reda på projektets förutsättningar, kartlägga konkurrenter och ta reda på vad kunder har för krav och önskemål. Exempel på krav och önskemål från kundernas sida var att produkten skall ge en överblick över innehållet och samla all klädvård på ett gemensamt ställe.  En litteraturstudie gjordes där det lästes om förvaring, människans relation till hemmet och om arkitektur. Information som framkom var bland annat att det är väldigt viktigt för människan att kunna utforma sitt hem efter egna behov och en bra riktlinje att strukturera förvaring på är efter var på kroppen kläderna används.En central del i projektet är Kansei Engineering, vilket är ett koncept för att koppla människor uppfattningar till produkters utformning.

Denna rapport behandlar vårt examensarbete som genomfördes i samarbete med Metso Dynapac. Uppdraget bestod av att ta fram ett högmonterat avgassystem för jordpackningsmaskinerna CA 252/302/402-Vibratory Roller. Dagens avgassystemsystem är bakåtmonterat och slutar under och bakom kylaren. Ett högmonterat avgassystem finns som tillbehör och fästes på det bakåtmonterade systemet. Problemet är att befintlig ljuddämparplacering försvårar kylluftens passage genom motorrummet,vilket får till följd att en onödigt stor fläkt krävs för att få tillräckligt luftflöde genom kylaren.

För att kunna bli pilot i kommersiell luftfart är första steget att utbilda sig. En pilotutbildning måste föregås av en medicinsk undersökning för att garantera en tillräckligt god fysisk hälsa hos den blivande piloten. Många utbildare kräver också att en person som vill utbilda sig till pilot genomgår en psykologisk lämplighetsprövning, i syfte att få en indikation på dennes personliga förutsättningar i övrigt för en lyckad utbildning och karriär inom pilotyrket. När utbildningen är genomförd är piloten redo för att se sig om efter arbete men den senaste tidens allmänna nedgång i flygbranschen har gjort det allt svårare för piloter att få anställning. Detta arbete har syftat till att ge en inblick i bakgrunden till den typ av lämplighetsprövning som genomförs inför utbildning, hur sådana prövningar värderas av arbetsgivare i branschen samt vad som i övrigt enligt arbetsgivare avgör om en pilot är aktuell för anställning..

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

The purpose of this thesis was to investigate the need of working instructions in Derome Träteknik ?s industrial house-building factories. Furthermore we wanted to determine an appropriate way for developing working instructions adapted to the conditions in a certain production environment. In the construction industry today prefabricated building elements are frequently used. With this come repetitive work tasks that need to be carefully planned.

The purpose of this study is to investigate whether a so-called "expectation gap" exist between the accounting consultants and their clients. The excistence of an expectation gap has already been confirmed between auditors and their clients. Interviews were conducted with both accounting consultants and managers to find out what expectations they have for each other. The factors that influence the occurrence of an expectation gap and the size of them are many but the most important factor may be regarded as individuals' different needs and requirements. The gap can be reduced or entirely eliminated by ensuring the quality of an accounting consultant's work, for example, REKO and / or that management have more realistic demands that actually can be met.

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.

Compared with a few years ago, the cost of concentrates has increased substantially and because of that an increased proportion of pasture is of interest. Pasture is cheap and the farmer does not have to harvest when the cows do it themselves by grazing. This saves both money and time. According to research milk yield decrease with an increasing proportion of pasture in the diet. This is because cows on pasture will have lower dry matter intake than cows with supplements.