In today?s consumption society, the image and core values of a company have become more important in order to secure the attention on the market. All entrepreneurs have to distinguish themselves in the extremely tight competition.This thesis examines how product photos can reach out to the consumers successfully. Both students have previous experiences from model shoots ? but now want to study the possibilities to sell a product without a human model.The purpose of the thesis is to examine how to convey core values by commercial product photos - how to best capture the attention of a customer.

AbstractTitle: 2008- the year of the mobile-TV-markets expansion? (2008- ett år för mobil-tv-marknadens utbredning? Drivkrafter hinder och aktörer).Number of pages: 50Author: Hilda EngstrandTutor: Lowe HedmanCourse: Media and Communication Studies CPeriod: Fall Semester 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose/Aim: The aim of this research paper is to identify the main operators on the mobile-tv-market and to map out the main forces behind its growth. What are the driving forces that creates a new disribution-market? Also to study how political media-regulation effect and urge the mobile-tv- market.Material/Method: Interviews with people from the mobile-tv-market. To read public-documents, press releases and reports from the government, media-companies and organisations has also been a method used to gain information.Main results: That the mobile-tv-markets growth is a result of several driving forces.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

Additiv tillverkning (AT) eller 3D-utskrivning är en teknologi som har berömts den senaste tiden och förutsägs kommer att förändra hela tillverkningsindustrin. Dessa termer hänvisar båda till ett antal tillverkningstekniker där ett objekt framställs skikt för skikt genom att successivt tillföra material i tunna lager.Baserat på en litteraturstudie och intervjuer med experter inom området undersöker denna studie möjligheten att använda AT inom företaget CJ Automotive (CJA) vilket är en underleverantör inom fordonsindustrin som tillverkar olika slags pedalsystem. Rapporten beskriver additiv tillverkning, dess fördelar och olika användningsområden. Olika AT-tekniker, AT-material och välkända 3D-skrivartillverkare presenteras. Signifikanta fakta rörande både kvalitet, kostnad och teknik redogörs för.

This report summarizes the development of a calculation program estimating the profitability of converting a peak-load oil-fired boiler to pellets. To convert an oil-fired boiler to pellets a new fuel handling system must be designed. Changes also have to be made to some other components. Since there are many different techniques for transportation, storage and treatment of the fuel only the most interesting techniques from Swecos experience and interest were included in the study.The capacity of the different parts in the system was dimensioned based on the power of the boiler after conversion. To estimate prices, installed power and dimensions manufacturers and distributers were contacted.

Thesis purpose: The purpose of this thesis is to make a contribution, by connecting the transfer of meaning within the context of TV series. The meaning is transferred from the brand to the character in a TV series and then further to the viewer. To look at different role functions that are used in dramaturgy and narrative techniques, we will be able to see how the brand will have a specific role and thereby make the transfer of meaning more successful and effective. This role will have an important impact on product placement according to the meaning that will be transferred from the brand to the viewer, through the character. Methodology: By looking at the transfer of meaning process that is created from the brand, an unstructured observation is applied where we observed the placement and usage of different within a specific TV series.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

Eriksson. C. (2010). How can mental top form be reached? Sport psychology consultants approach to mental training.

Vad är val? Är de val vi har våra egna? Spelutvecklare idag kämpar med spelares fria vilja då detta kan orsaka problem. Till exempel när spelare gör val som spelutvecklare inte har räknat med, vilket som följd kan skapa frustration hos båda parter. Problemet med spelares oförutsägbarhet i sina val är något som spelutvecklare ständigt har försökt lösa. Idag finns det flera tekniker som syftar till att diskret manipulera möjligheten till val inom spel och samtidigt låta spelare vara ovetande om detta.

I?ve been working with traditional materials such as ceramic sculptures and oil oncanvas. By using these traditional materials I can bring in more lowbrow aesthetic suchas package design, illustration, toys, animations, comics etc. and transform it to somethingdifferent.Using this aesthetic and techniques became a way for me to communicate everydaythoughts on life as well as my most inner thoughts on how I think about myself.This report is about how I?ve been using these components to realize my master degreework for the Spring Exhibition at Konstfack in Stockholm, 2014.This report also extend my process of getting there..

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.