Today`s society requires that municipalities focus must be more on effectivity and quality. Because of this it is important for municipalities to look after the controlling systems. Many municipalities choose to adopt models that reflect the efficacy. The municipality of Vellinge has chosen to implement balanced scorecard in all their efficacies. We found it interesting when it was exposed that 70 % of all implementations of balanced scorecard fails.

In today's society, the internet is an important part of everyday life. Over recent years the number of electronic services has increased markedly. Communities such as Facebook, consume more of people's time than 5-10 years ago. How can public authorities benefit from these communities or are the municipalities not ready for this? The municipalities determine how their resources should be allocated based on the municipality's needs.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

Earlier this year the Swedish migration board gave a part of their responsibility for the separated children to those municipalities that have signed an agreement with them, so that the children can get the best handling of their matters and also to lift the heavy pressure of the Swedish migration board. Our aim in this paper is to see how this division is made and which areas of responsibility they have. We want to see how this process is being handled in relation to these children?s rights, the Convention on the Rights of the Child and the Swedish law. To get the best information possible we used a qualitative method.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

The purpose of this study was to look into the work of care organizers for elderly care, in three municipalities in southern Sweden, and how they use the law and local guidelines to evaluate the need for home care. The intention was to determine if presence of relatives makes a difference in the needs assessment and if the care organizers practice harmonize with the guidelines. To do this, we did a qualitative study alongside with analyzing each of the local guidelines. By interviewing five care organizers, we were able to see their side of elderly care and how they combine the law and local guidelines in their daily work with elderly care. Our main themes are, in short, the law and local guidelines, the view of care organizing and needs and also closeness to relatives.

The purpose of the thesis is to describe the developing of the branch libraries of the public library of Kristianstad between the years of 1967 and 1977. The municipality of Kristianstad was grounded by a unification of the city of Kristianstad and ten small municipalities. The fusion takes place in three different stages during the years of 1967, 1971 and 1974. The first stage included the city of Kristianstad and the municipalities of Araslöv, Nosaby, Träne and Vä. The municipality of Araslöv got free small villages and village of Färlöv was the biggest one.

This report describes the development process of a pipe clamp used on exhaust system for cars. It is made based on the manufacturers desire to improve and make the clamp easier to manufacture and to reduce its price to their customers. This should be done either by manufacturing the clamp in one piece without an expensive and work intensive welding process, or by generating ideas of how to develop a brand new type of clamp. Investigating the market for similar products was done to eliminate intrusion of other manufacturers? patents but also to generate ideas.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The aim of this study was to illuminate how social workers in social services work with the social phenomenon, homelessness in two municipalities. The study is based on qualitative semi-structured interviews with interviewees from a department of social services. Our theories that we used was resistant inequality, structural discrimination, exclusion, empowerment and representation. After compilation of our empirical our conclusions are that homelessness is a complex phenomenon. Social workers handles homelessness based on client?s needs and the work is individualized.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Bygghantverk, 27 hp, 2012.

AbstractFörfattare ? Malin Andersson och Slaven MarasTitel ? Aspects of decentralizations effect on eldercare ? a qualitative study of three municipal authority office/ Aspekter på decentraliseringens effekter på äldreomsorg ? En kvalitativ studie i tre kommuners myndighetskontorHandledare ? Linda ErlandssonExaminator: Jan Petersson This is a qualitative study of the phenomenon of decentralization and its impact on care managers working in elderly care. The aim of the study was to examine how care managers margin for maneuver and need assessments continually are shaped by organizational conditions and municipal governance. With these aspects in mind, we wanted to identify similarities and differences in three different municipalities? ways to work with care management in the elderly care.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.