The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

Statistics of occupational injuries show that bricklayers are among the most exposed, with heavy lifting by far the most common cause of long-term sick leave. Prefabricated brick beams create yet another risk of injuries that can be prevented by auxiliary equipment or alternative solutions. From articles, interviews with masons and from a survey carried out in conjunction with this report, it appears that there are frequently difficulties in the use of available means for lifting and handling. Previous studies on the subject of transverse reinforcement in masonry beams indicate a viable method for bridging large openings in masonry walls. This bachelor thesis delves into whether the idea could be realized in today's brick construction with a view to improving occupational health and safety.

Title: The customer?s contribution to the innovation-process ? a study of using customers to discover latent needs. Level: Final assignment for Bachelor Degree in Business Administration Author: Robert Klein Supervisor: Agneta Sundström Date: 2014-06 Aim: The purpose of this study is to gain enhanced understanding of what knowledge costumers contribute with in an innovation-process lead by a producer of goods, and how that knowledge is used to fulfill latent needs. The area of research has formerly described which results customer-involvement lead to, but have been scarce in describing how results are produced. Method: From a qualitative onset, a case-study collecting data through observations and interviews capturing customer knowledge contributions, and producer use of fetched knowledge has been conducted. Data has been analyzed using a grounded theory approach. Results have been processed in several steps in which material has been categorized and enriched continuously. Result & Conclusions: Customer-knowledge is broken down into market-knowledge, everyday-knowledge, and specialist-knowledge, which all are significant to a producer of goods.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

The aim of this small thesis is to investigate if the probability of business failure is higher at the time of divestment than at the time of acquisition for portfolio companies that have been subject to private equity ownership. The background for this thesis is the widespread critique aimed at private equity firms, claiming that they increase the risk in their portfolio companies. We have performed a study of 53 buyout transactions, involving Swedish manufacturing companies, covering a time span of 13 years, from 1995 to 2007. We find evidence of an increased risk of business failure for the portfolio companies with a short forecasting horizon (within one year). The absolute increase in the sample is however small.

The fork lifter chipper truck is a concept which has been developed for harvest and transport of bio fuel. The system consists of one fork lifter chipper truck and 1, 2 or 3 transport lorries, usually two, which serves the fork lifter chipper truck. The system is driven by the fork lifter chipper truck that produces chipped material into a container on the truck. When the container has been filled the truck drives to the landing site where it?s offloaded.

The object for this study is a company developing and manufacturing vehicles for heavy transportation. The company distributes their products on a global market. Therefore the company is required to have efficient internal production development processes in order to successfully beat the competition. The purpose of this master thesis is to study how this particular company intends to implement their standardized theoretical product development process within their organization and how well it is done. We intend to identify and specify if the process has any unexploited capacity.

This thesis focuses on RM and customer relationships and tries to answer two research questions: how firms can retain customers and how to generate profitable customer relationships by using relationship marketing. We conducted case studies on JOB media, a company in Luleå, and Polardörren, a company in Öjebyn, Piteå. Our research has revealed that in many ways our case study companies conform in major ways to the theory in this particular area. However there are differences between how these two firms go about in regard to customer retention and establishing profitable customer relationship. We have discovered that JOB media, which is a service company is more inclined to maintaining close and long-term relationships with its customers.

Vattenfall AB is a large producer of electric energy where approximately half of the energy comes from hydropower. Vattenfall Hydropower has got almost a 100-year old history and the company has developed a lot since 1909. After that the number of power plants increased and the competition got more intense, there were higher demands on the reliability. One way to secure the reliability with a good satisfaction at the power plants is to implement a maintenance method named Reliability-Centred Maintenance. RCM is a result of the introduction of the complex aeroplane Boeing 747 in the 1960?s.

This thesis aims to develop proposals and models for a modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.

Companies today are expected to communicate their responsibility to the world around them. Society?s expectations differ and stakeholders are demanding that companies act responsibly on matters related to climate, work environment and human rights. The purpose of sustainability reports is that companies should measure, present and take responsibility in relation to their internal and external stakeholders. It is intended that a reasonable picture of the company's sustainability performance should be communicated, containing both positive and negative effects.Companies efforts with sustainability issues is industry-dependent and industries with significant environmental problems perform the most advanced environmental statement.

The competition for Norway spruce pulp wood in Central Sweden increases, forcing the supply-structure of Holmen to face two important challenges. Firstly, it is of the outmost strategically importance to secure the long-term supply of Norway spruce pulp wood to the industries. Secondly, Holmen desires to increase the obtainable volume of Norway spruce pulp wood. This would enable the company to choose volumes in the lower price-segments and thereby decrease the dependency of costly marginal volumes. As this work shows, one part in managing these challenges could be to lower the quality standards concerning root rot (Heterobasidium annosum). Facts presented in the work shows that: 1. Technically, the TMP-industry of Braviken can handle a much more rotted pulp wood than that used today, although the cost of refinement increases.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

The project has been provided by Zenit design group and the goal for this project was tomanufacture and perform tests of a prototype that supersaturates water in a continuous flow ofwater. The project has involved finding and sorting out relevant data in scientific papers, books,communication with foreign manufactures and other platforms for information.The project has resulted in manufacturing of a test rig and an oxygen infuser based onmembrane technology. The test rigs purpose was to perform tests on oxygen infusers fordifferent comparison test and performance benchmarks in a in a laboratory provided by Zenit.The project led to satisfying results using the oxygen infuser manufactured by the authors withcomparable levels of saturation to the reference infuser.The theory behind this project is based on medical research, belonging terms will be explainedbut the authors have chosen to delimit the project from the medical area. The reason for this islack of knowledge in this area and its irrelevance to the mechanical engineering education insuch..

Palm oil has been used in processed food commodities since the 19th century. An increasing demand for regulating and ensuring a more sustainable palm oil production has resulted in various initiatives. However, these initiatives have received critique due to lack of compliance and insufficient revisions of palm oil plantations. The initiatives for creating an ethical, social and environmentally sustainable production are not sufficient for the Swedish industrial users of palm oil. As a result, stakeholders such as Swedish food processing companies, commit to ethical sourcing codes of conduct that go beyond the international palm oil initiatives.