In Sweden and in Scandinavia the amount of tree species are rather few. However many different forms of trees arise due to mutations and gives rare appearances like cut-leaved and hanging forms. In some cases these trees are interesting as cultivars and a few of them have become popular garden trees. The knowledge of the original trees and early propagation is meagre.In this study a selected group of trees were found through search of literature. Eight tree forms were chosen and investigated in situ.

Chlorinated aliphatic hydrocarbons (CAH´s) were used widely within dry cleaning facilities and for metal degreasing until their toxicity was discovered. PCE is still used as dry cleaning liquid. Today CAH´s are found in soil environment at places where they have been used in the past. The CAH-concentration in trees growing on contaminated land has quite recently received attention as a cheap and effective way of assessing the extent of a CAH-contamination. The method has however, not been put into use in Sweden.The aim of the study has been to investigate whether the CAH-concentration in tree cores could be used to delineate the spread of CAH in a soil environment under Swedish conditions in different seasons.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The work was an assignment from Jarlträ AB which is a privately owned sawmill located in southern Småland. The aim of the work was to investigate the economical result of different pricelists and how to adjust different parameters such as length correction to give an optimal result. The pricelists was examined through a computer program (SilviA). The pricelists was made in the program and after that a simulation was preformed with a selection of random sampled trees gathered from the area nearby the sawmill.

The interest for alternative forest regeneration methods increased significantly during the 1990´s after 50 years dominance of the clear-cutting system (Holgén & Hånell 2000). One reason for this was that clear-cutting was being more and more questioned by different envi-ronmental organizations and because the forest sector for economical reasons wanted to find cheaper ways to regenerate forests. In the beginning of the 1990´s two shelterwood experi-ments were established in a joint effort by Svenska Cellulosa Aktiebolaget (SCA) and the Dept of Silviculture, Swedish University of Agricultural Sciences (SLU). The experiments include various forms of cutting and shelterwood densities and represent productive spruce forests in central and north Sweden (Roggsjön in the province of Medelpad and Skikkis-jöberg in the province of Västerbotten, respectively ). The experiment next to Roggsjön has been reported earlier in three MSc theses, and is also the focus of this thesis.

Forestry and forest products are vital components of the Swedish economy but the forest is also important for recreation, hunting, out-door life and conserving biodiversity. The Swedish Forest Act has two equally important objectives, production and environmental protection. Polytax is the Swedish Forest Agency´s inventory programme which monitors progress toward the two objectives in connection with regeneration fellings. It includes data on environmental protection measures taken in connection with regeneration fellings. 30 § of the Swedish Forestry Act and related regulations specify the demands for conserva-tion of nature.

In April 1986 an accident occurred at the nuclear power station in Chernobyl. Radionuclides were spread all over Europe including Sweden. Today there are still measurable concentrations of 137Cs in the different ecosystems in the contaminated parts of Sweden. The wild boar is the second most popular game in Sweden and today the Swedish population consumes more wild boar meat than ever. As the wild boar population increases the wild boars are moving further north towards the contaminated areas, which creates an interest to study the state of 137Cs in wild boars in these areas. Muscle samples from wild boars collected during 2010-2013 were analyzed based on 137Cs content.

The purpose with this thesis work was to design and build a technical aid for installingbatteries in telecom base stations. Today that job is done manually, since there is noequipment on the market for that purpose. Installing batteries in base stations manually isa very tough job.To get ideas for possible solutions a preliminary study on existing lift aids was done.From the preliminary study the conclusion that some kind of overhead crane would besuitable for the task was drawn. After that a lift for installing batteries in base stationswas designed, built and tested. The tests show that it is possible to minimize heavy liftingwhen installing batteries in telecom base stations, at a relatively low cost.ii.

ABSTRACTThis pilot study examines the knowledge about tree root systems amongst five treeplanting professionals. The aim is to find out the professionals? collective knowledge ofthe nature of root systems of various trees used in green areas. Furthermore; to explorehow the professionals adapt landscaped green areas to the tree root properties in asustainable manner. Questions: Which tree species have special root properties toconsider and how do the professionals utilize this knowledge? And: How do theprofessionals in general adjust planting according to the root systems of trees in areas tocreate sustainable green environments?Interviews with the professionals were performed.

This final thesis is performed on commission of Hargs Bruk Ltd. Hargs Bruk manages one of Sweden?s largest privately owned forests. A main part of the managed forest is situated in Roslagen in eastern Uppland. Since 1934 felling calculations have been performed within the estate every tenth year.

With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.

The aim of this study was to describe preferences of geographic direction of ten, oak-living epiphytic lichen species and how they responded to sun exposure, nearby bushes and trees, bark fissure depth and circumference. The frequency of every species was recorded in arcs of ten degrees around the tree at a height of 130 to 180 cm above the ground. An estimation of the amount of every species in every arc was also recorded. To analyse how the distribution of the lichen species responded to the different factors their concentration for every tree was plotted against the four factors. The distribution of Cliostomum corrugatum had a positive response to high sun exposure and a negative response to a thick layer of bushes and trees.

SCA has today almost 300 000 hectares of their forest land planted with lodgepole pine(Pinus contorta var. latifolia). Due to initial extensive planting in the 1970ies the area oflodgepole pine forests in the thinning age has grown rapidly from the end of the 1990ies.During the years 1996-2005 first commercial thinning of lodgepole pine at SCA took place.The goal of the hereby presented study was to investigate the growth and stability in thosefirstly-thinned lodgepole pine stands a few years after thinning. Furthermore, the objectivewas to investigate the relationship between stand stability and different stand parameters.Additionally, lodgepole pine stem quality was estimated.The study is mainly based on the data collected during an inventory project carried out atSCA in 2008. Altogether 91 lodgepole pine stands in northern Sweden were measured afterthe first thinning.

95% of the productive forest land in Sweden are now being exploited for forestry. The new Forestry Act of 1993 equate the goal of production and the environmental goal which means that the objective for forestry is a sustainable yield, while the biological diversity must be preserved. Recent years results from the inventories of the Board of Forestry show declining trends in how nature conservation aspects taken into consideration at the felling sites.The aim of this study is to investigate what happends with the nature consideration taken at felling sites in the long run. 20 final fellings in the county of Östergötland were re-inventoried 7-9 years after final felling. These felling sites had previously been inventoried before final felling (P0) and one year after final felling (P1) in the inventory Polytax by the Board of Forestry.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The aim of the work was to compare two different pricelists with the actual output from a harvester. The results have also been compared with a volume estimate of standing trees done by the Swedish Forest Agency and the ?true? value registered by the Wood Measurement Association. The study confirms that the output calculated by the computer on the harvester is more reliable than the volume of standing trees estimated by Swedish Forest Agency. .

The background to this study is that the forest company, Holmen, has found large discrepancies between harvested volume and the measured volume at the industry. Factors like bark features, breakage, double tops, bends and stem damages was noted, and all stems were measured manually. Hypothesis testing with the method "random in pairs" were used to examine whether the harvester measured values significantly differed from the manually measured. The result of a properly calibrated harvester shows in average underestimation of the volume with Skogforsk Pine as a bark function. This means that the harvester isn´t the reason why the volume measured in the industry is lower, the fault is elsewhere. The study also indicates a need for a unique bark function for logepole pine..