This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Purpose: The aim of this paper is to investigate whether there are differences between big cities and small cities in adventure tourism. The cities that are studied are Stockholm and Visby.Methodology: The study is based on a qualitative method. We have done interviews and observation. We also used books and internet when collecting information.        Conclusions: The study has shown that differences exist between large and small cities. People seek out the opposite, whether you're from a big city or small town.

The purpose with my investigation is that create an image how pedagogues perceive the need of special education in the preschool. My framing of a question is: How perceive pedagogues the need of special education in the preschool? The study is written from a qualitative model and the study has been carried out with help of interviews. It is five interviews made. Three of them are made by preschool pedagogues and the other two with special education pedagogues.

The purpuse of this study was to develop knowledge about learning condition that are to be in a context of interaction with persons that have Autism Spectrum Disorder diagnosis are included. The pre-understanding has evidence in that the public very often has a lack of knowledge in understanding persons with this kind of disabilities that can put the social interplay in disharmony. The phenomenological approach was used to reach the essence of the learning influence processes. Seen from the respondents experiences of interaction as a help for the informal learning in a working context. The purpose was to see the result of interplay and the effect of learning condition and to see what help those respondents acctually have experienced.

The purpose of this thesis is to assist the Swedish energy company NIBE Energy Systems in their studies of adaptive regulation applicable to electrical water heaters. Due to coming energy classifications of these appliances in the European Union, NIBE Energy Systems needs to use adaptive regulation, called Smart Control, to keep their products in the best possible energy class and remain competitive to the market. By using this Smart Control regulation a 2-3 % improve-ment of efficiency can be credited the system. This is a small number, but heavily needed, since the energy classes are based on the idea that the European Union is provided with electricity from coal condensate power resulting in a 40 % maximum efficiency. Furthermore, doing noth-ing will result in some water heaters not being approved to use on the market from 2015 due to low efficiency.

AbstractThe purpose of the study was to examine if manual signs used as support to spoken and written language can be a god mnemonic for learning of word-pictures. I performed my study as an experiment in which I made a Memory game with word-pictures. I played the game with the children twice. The first time, we played without manual signs and the second time I used sign as a support. I observed the children and noted the words they learned to read with and without the support of manual signs.

A well known optimization-problem of multiprocessor system is scheduling of tasks. In this paper I use a variant of previous known algoritm, (Fast Critical Path) for scheduling real-time tasks on a multiprocessor system. This is made in a simulation study in MATLAB. The system architecture is assumed to be a MIMD- machine, (Multiple Instruction stream Multiple Data stream) with bus-typologi and message-architecture. Scheduling was made on this system where the number of processors varying from five to ten.

Purpose: The aim of this study was to observe and describe the work environment of veterinary nurses, focused on fysical ergonomics, in a Small Animal hospital. Method: An observational study was made in the stationary ward in an animal hospital. The observation was based on a checklist from the Swedish Work Environment Authority. Six veterinary nurses was observed over three hours when they nursed the patients. The checklist contained paragraphs concerning work postures, manuell work, knowledge, competence and the design of the workplace. Result: The results was divided into three categories; red, yellow and green.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

The following study is a comparative analysis on the usage of history in Ridley Scott?s epic Kingdom of Heaven. Based on the thesis that this movie has a lot to say about contemporary political values, it compares the theatrical version from 2005 with the 45 minute extended Director?s Cut, which came out on DVD in 2006. Firmly based in the popular-cultural context I tried to evaluate whether these changes related in any way, to matters concerning the current gender debate and post-colonial theory.

Undersökningen omfattar företag som har tagit emot elever både under den traditionella och under den nya praon. praon är skolans samverkan me dnäringslivet och syftet är att ge en blid över hur företagen i kommunen ser på den nya praon och dess förändring. Det finns en allmän verdertagen uppfattning om att lärare och elever har mottagit den nya praon med visst missnöje. En enkät har utformats och sänts till 65 företag, kommun och landsting. Av de 65 företag, kommun och landsting svarade 37 stycken.

My essay deals with a problem in our society which, in my opinion, has been neglected. Even today in 2011, the quality of schools and preschools is extremely varied. This has been a problem for a long time and not nearly enough attention has been paid to it.In my essay I have tried to understand what it is that causes these differences in quality between preschools. With help from literature and research studies I have examined what quality in preschool really means.My starting point is an account of my own experience at the preschool where I currently work and a description of a study visit I made to another preschool which operates in a very different way to the one where I work. I wanted to investigate what the consequences are for children who grow up attending preschools of different quality.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.