The company Sol & Energiteknik wanted to examine the possibility to make a standardhouse totally energy independent. Based upon this I have, during the spring of 2007,examined the possibilities available at the market today through litterature studies, contactwith several companies and reading reports at the internet.The first thing to examine has been to determine the energy consumption for a standardhouse, and find out if there are better technologies to be used for energy conservation.My conclusion in this matter is that there are possibilities today for building a house moreenergy efficient.When I had reached the point at which my design for the house was decided, I also hadto choose the different products to use to produce energy as well as to store that energy.To produce heat and electricity to the house I decided to use a wind turbine and a solarwater heater.The most difficult part of designing a house that is energy independent is that theproduced energy must be stored somehow. Storing the heat is relatively easy beacuse theheat can be stored in a large water tank. The electricity is a bigger problem beacuse itmust be stored in batteries, which today are too expensive to be used in a standard house.In the future producing and storing hydrogen might be used to produce electricity, buttoday that technology is both expensive and not tested enough.My final conclusion is that a standard house can not be built to be totally energyindependent today, unless it is very expensive to connect the house to the electricitynetwork. As an alternative solution I came up with a proposal for a house which isconnected to the electricity network and have some amount of own produced energy.This house prooved to be a good investment if you choose to build it today, and it couldbe a very good investment in the long run beacuse energy prices increase every year..

AbstractThe organization of the health care system in Sweden has been subjected to investigations and discussions in order to make it more effective. The aim is to create a better public health care and to economize on the financial resources. In the year of 2003 an amendment of the Swedish law made it easier for municipalities and county councils to make own solutions and agree about how health service should be organized in the best way. This resulted in a number of test projects. In this paper I will focus on one of these test projects which took place in Borlänge and was based on collaboration between the municipality and the county council in Dalecarlia.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

Blekinge Hospital suffers from a budget shortage of 100 million SEK, while the government now requires that hospitals will no longer be running a deficit. Blekinge Hospital will then use their limited resources to survive in the future and the activity must be enhanced in order to keep costs low without having to lay off personnel. The idea is that the organisation should be more efficient with a more efficient resource usage. Performance measurement systems are important tools for achieving the policies set out within an organization, measuring and evaluating performance is a way to see where improvements in efficiency may be necessary in the business. Balanced Scorecard (BSC) is one of several measuring systems, where the focus is on measuring non-financial performances.

Thesis purpose: The purpose of this thesis is to determine how a technolo-gically enhanced shopping tool, synergizing eCRM tech-niques with personalized promotion at the point-of-sale, can increase customer loyalty by considering perceptions of current grocery retailer loyalty programs in Sweden. Methodology: An exploratory research was undertaken in the light of a qualitative method collecting primary data through focus group interviews. Theoretical perspective: The major considerations regarding theoretical aspects, for this thesis, can be addressed by Behavioral/Attitudinal loyalty and Relevance of Promotion. Empirical data: The empirical data, in regards to primary data, was ga-thered based on four focus group interviews. Conclusion: The conclusions of the thesis imply, that in order to make a loyalty program successful, it needs to firstly be conven-ient for the customer; easy to join, and provide an easy and time efficient display at the point-of-sale.

Arbetet går ut på att genomföra en miljö- och energianalys av två pressgrupper i processhallen. Detta innebär att dagens process skall analyseras för att se om man genom olika system kan göra arbetsklimatet bättre för operatörerna samtidigt som en besparing av energi möjliggörs..

The purpose of this degree project is to come up with a new package to Renat Brännvin for »Vin & SpritAB« and make the product more attractive on the market of bars, restaurants and hotels. The commissionhas included to decide the material of the package, whether it´s possible to manufacture the productand to make an estimation of the costs.The conditions that »Vin & Sprit AB« set up was to make the product attractive to a younger targetgroup, in this case people from 20 to 40 years old. As Renat Brännvin is considered to be a product of firstclass it´s of great importance that the package reflects the look of a premium product.At first we looked at the history of the company »Vin & Sprit AB« and Renat Brännvin. We decidedthat the package schould consist of a bottle, glasses and a device used when serving the liquor. To getinspiration before sketching we studied different kinds of bottles, glasses and serving devices.

Efterlevande makes arvsrätt har genomgått stora förändringar under 1900-talet i svensk rätt. Från en väldigt svag position under tidigt 1900-tal till en betydligt starkare ställning i dagens ärvdabalk. Den senaste förändringen skedde 1986 då efterlevande make började ärva framför gemensamma barn. Det liknade den förändring som tidigare skett med arvingar i den andra arvsklassen, där efterlevande make ärvde före dessa arvingar men arvingarna hade i sin tur rätt till ett efterarv när efterlevande make avled. I dagens ärvdabalk är den stora motsättningen mellan särkullbarn och efterlevande make, där särkullbarn ärver före maken. Släktbanden har under de senaste århundradet luckrats upp och det är inte längre av samma vikt att arvet hålls inom släkten som det tidigare varit när det främst var den fasta egendomen som var det viktiga i arvet för att kunna bruka jorden.

In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.

Arkitektkontoret Sweco Architects i Göteborg har tagit fram ett förslag för ett bostadsområde i Varberg, där Varbergs kommun var beställare. De föreslog att ett eget områdesförslag skulle tas fram i Revit Architecture utifrån de planbestämmelser som gäller i området. Som en fördjupning i detta arbete valdes att även studera arbetsprocessen i programmet samt hur denna process kan tidsoptimeras. Ett problem idag är att en sådan process kan vara tidskrävande och ineffektiv. Syftet med detta arbete var att finna idéer på hur processen kan effektiviseras och att utveckla kunskaperna om Revit.Som en inledning modellerades hur området ser ut idag i Revit utifrån en ritning skapad i AutoCAD.

Civil-military relations ? conditions for cooperationAbstract: Civil-military cooperation is a branch of current interest, both in studies and research. The importance has also increased after the government´s demands in a more developed and efficient coordination of national contribution to international peace support operations. Several studies show that there is a lack of ability to cooperate between different levels of command and other actors. The Swedish tradition of state administration is strong and the responsibility to cooperate lies within the hands of the different authorities.

Sweden recently changed the national regulation of chimney sweeping. This study has two purposes. The first purpose is to evaluate the effect of this reform to see if the new regulation has led to an effect in terms of increased chimney fires in single-family houses and for the wood-burning and oil-burning stoves, respectively. The second purpose is an updating of a previous study (Mattsson 1994) of analysis of society´s benefits and costs of different alternative sweeping frequencies for wood-burning and oil-burning stoves. This study also has a secondary purpose to examine the extent to which the local sweeping rules vary with climate conditions.  Mattsson, based on his results, proposed that the sweeping requirements for oil-burning stoves should be reduced from twice a year to once every second year and for wood-burning stoves the sweeping should be reduced from four times to once each year.

An increasing global population and a worldwide growing urbanization has raised the questionabout the future food security in cities all over the world. Peak-oil limits the access to cheap fossilfuels which threatens the global food-supply chain. This has resulted in a larger awareness anddiscussion related to urban agriculture. Growing crops and keeping animals within the city-borderscould be one way of creating a more robust and sustainable food supply for city dwellers. However,to enable an expansion of the urban agriculture many theorists argue that policies and institutionalstructures that supports and promotes city farming have to be developed.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This literature study describes the ways in which the spread of rabies can be prevented in India, what guidelines are set and also which methods have proved most effective. Every year rabies causes the death of around 20 000 people in India, which makes the prevalence in the country the highest in the world. The main source for human infection is bite wounds from infected dogs. People and animals can be vaccinated both prophylactic and post-exposure prophylactic (PEP), despite this the disease continues to claim high number of victims. The majority of those dying are young men and children from the poorer part of the population. Knowledge among the Indian population on rabies and its transmission routes, wound care and vaccinations is very limited.