The purpose of this thesis is to examine whether parents that obtain long-term maintenance support in Enköping, consider the support as adequate when trying to meet their children's basic needs. The thesis also intends to investigate whether parents experience that their children, because they receive income support, have been socially excluded or stigmatized in their daily lives because of the family?s maintenance support. Further, the thesis aims to examine if there are any discrepancies in the above mentioned issue in relation to how long the parents have received maintenance support. Theoretical starting points used in this thesis mainly consist of the child perspective, social exclusion and the stigmatization theory.

A well-planned grave with a sustainable selection of plants facilitates easy maintenance for both staff and the holder of the right of burial. It also helps reduce the negative impact on the environment.As in many other areas, the environment is high on the agenda within the cemetery administration. One of the major concerns is the impact of the choice of plants for the grave. Within the industry there is a great motivation and willingness to adapt to a sustainable work mode and this has spawned a number of project works. In autumn 2009 the partnership project, ?Environmental aspects of planning and maintaining graves?, was started in Movium (at The Swedish University of Agricultural Sciences).

The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..

Examensarbetet utfördes på Priority Aero Maintenance som är belägna vid Arlanda flygplats, Stockholm. Priority Aero Maintenance är i enlighet med EASA Part 145 en godkänd underhållsorganisation och utför all sorts underhåll på ett flertal olika flygplanstyper.Underhållsarbete är ett mycket noggrant arbete som följer, av underhållsorganisationen själva, bestämda procedurer och rutiner. Hur arbetet utförs ska vara godkänt av myndigheten och finns beskrivet i underhållsorganisationens MOE, Maintenance Organisation Exposition, även kallad verkstadshandbok.Vid underhållsarbete finns det framtagna underhållskort eller jobbkort. Där varje jobbkort specificerar en särskild underhållsåtgärd. Då en underhållsorganisation åtar sig ett större underhållsarbete innebär detta således en hantering av hundratals jobbkort.Då Priority Aero Maintenance inte har en fast struktur för hur hanteringen av jobbkort ser ut, med avseende på sortering inför en underhållscheck.

yield optimization, wind energy, sustainability, maintenance..

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

Att sätta sig in i system kan vara krångligt utan rätt sorts dokumentation. Vi har undersökt vilken dokumentation som kan vara lämplig att lämna över till nya utvecklare, som ska arbeta vidare med systemet i software maintenance fasen.Det har gjorts genom att vi har gjort en litteraturstudie om dokumentation samt undersökt vad för dokumentationsartefakter som används när man ska sätta sig in i datorsystem. Vi använde eXtreme Programming för att utveckla ett system som vi försökte dokumentera samtidigt som vi utvecklade det.eXtreme Programming förordar muntlig kommunikation, vilket är svårt att lämna över till nya utvecklare. Vi upptäckte under vår utveckling att det var svårt att föra in dokumentation sam-tidigt som utvecklandet pågick,  därför använde vi bara enhetstester och  strukturerade kod-kommentarer under utvecklingsiterationerna.Vi undersökte hur dokumentationen som skapats fungerade genom att göra en undersökning bestående av strukturerade intervjuer där de fick komma med kommentarer om hur dokumen-tationen hjälpte förståelsen för systemet.Vi lämnar ifrån oss en vidareutveckling  av eXtreme Programming  som innefattar en doku-mentationsiteration  innan överlämnandet  samt en studie om vad för dokumentation som är värdefull att ha vid systemöverlämningar..

This report was undertaken at the request of the Management and maintenance department of Swedish National Road Authority (Vägverket Region Sydöst) in Jönköping.In 1992, the management and maintenance of Swedish roads were laid out on external constructors. When putting out a tender for the work, the foundation is from a national set of rules which are in constant change. This report is limited to winter road upkeep.The trend in the invitation for tenders is that it is moving from the more conventional executional demands towards the less controlling demands. The downside of functional, less controlling demands is that it is difficult to articulate how to measure them. The order authority therefore has to find ways to make sure to get what has been paid for.In connection to the invitation for tender of winter road upkeep for 2005, the new set of rules, ATB Vinter 2003 was deployed.The main purpose of this thesis is to see which the big changes in the set of rules are and how these changes affect the organisation and activities of the constructor.It is also studied how the changes in execution is perceived by road users and how it affects the possibilities of the constructor to come as a newcomer to a new area of administration.Interviews and examination of sets of rules has led to a list of a number of changes that the constructors feel affect their work in any sense.Views from road users that have come in to the order authority have been scrutinized to see how they have experienced the change.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Costs of maintenance on agriculture machines is something that many farmers has a low knowledge of, it can depend on low interest or that the farmer don?t have enough time. To make it easier for the farmers they can use many computer programs which are available on the market. In this program they can calculate their costs of maintaince on their agriculture machines, for example STANK and JTI machine calculation program. Most of this program is using Svensson (1987) costs model whish was made in Sweden in the middle of 80 decade in a large study.

AbstractThis report was undertaken at the request of the Management and maintenancedepartment of Swedish National Road Authority (Vägverket Region Sydöst) inJönköping.In 1992, the management and maintenance of Swedish roads were laid out onexternal contractors. When putting out a tender for the work, the foundation isfrom a national set of rules which are in constant change. This report is limited towinter road upkeep.The trend in the invitation for tenders is that it is moving from the moreconventional executional demands towards the less controlling demands. Thedownside of functional, less controlling demands is that it is difficult to articulatehow to measure them. The order authority therefore has to find ways to makesure to get what has been paid for.In connection to the invitation for tender of winter road upkeep for 2005, the newset of rules, ATB Vinter 2003 was deployed.The main purpose of this thesis is to see which the big changes in the set of rulesare and how these changes affect the organisation and activities of the contractor.It is also studied how the changes in execution is perceived by road users and howit affects the possibilities of the contractor to come as a newcomer to a new areaof administration.Interviews and examination of sets of rules has led to a list of a number ofchanges that the contractors feel affect their work in any sense.Views from road users that have come in to the order authority have beenscrutinized to see how they have experienced the change.

The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..

Today's communication solution between the vehicle and trailer is one many see as anon-viable solution, then breakdowns on both the lights and cables are common. Now, anew innovation enters the market, a system that can transmit wireless control signalsbetween the vehicle and trailer.Parvus and Zap, the two solutions that the projekt group has come up with during thisthesis work carried out over the last year on Utvecklingsingenjörsprogrammet.Technologists Peter Jägevall and Christopher Åberg has developed this project on theirown. The group has developed various concepts and chosen to work on, two of them.The project has resulted in this report and a prototypeThe solution that the group has developed is a wireless communication between vehicleand trailer. The project team has developed new power-efficient LED lighting fixtures inorder to implement an internal power source in the trailer. The result of this has becomea maintenance-free and wireless product to trailers.

As the final course in the education ?University Diploma Programme for Process Operators? there is a thesis in cooperation with a company required.This thesis is about operator maintenance and 5S made at Metsä Board in Husum.In this report you can read my opinions and conclusions based on literature studies and the interviews that have been made with the staff at PM6 (the paper machine).I chose to focus on the theory of lean, 5S and operator maintenance because it covers the area of this thesis.The operators shall do their rounds to make sure that the equipment works fine. They shall also write down things that they notice in a checklist. This is not done as it should be and the question is: can this be solved by using 5S?My conclusion of this thesis are:Better review of the task so that everyone is involved.

In forestry there are always needs of forest data to make good strategic decisions of different actions and economic winning. Usually this data gets from field-estimations made by forest workers with expensive costs and sometimes unsatisfied quality. StoraEnso Skog is a great forest company in Sweden and they have part of the responsibility of the forest own by Bergvik Skog. Bergvik Skog is owner of 1, 9 million hectares productive forest land. Both Bergvik and StoraEnso have great interest in new inventory techniques to get the important forest data. The company Foran Remote Sensing offers the opportunity with airborne laserscanning of forest and forest land. Foran got the mission of Bergvik and StoraEnso to laser scan Bergviks possession in Älvdalen, Dalarna.