Växjö is a medium-sized town situated in the centre of the county Småland in Sweden with a good infrastructure and logistics and with a university that encourages cooperation with private and public companies. It is in this town that our case study of Småland Airport will take place. The aim of this study is to examine in which way the program of Library and Information Science at the Linnaeus University in Växjö offers knowledge that can be relevant for the staff at the airport in Växjö - Småland Airport. Using Wilsons model as our theoretical framework we examine how these two align with each other and by using a matrix that we ourselves elaborated in our analysis, we provide a clear picture of how the comparability two places comparability is represented. The result shows that there are compatible aspects to the Småland Aiports needs and what the program of Library and Information Science has to offer.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

There will be changes in the accounting regulations in Sweden. Firms will be categorised as K1-K4 firms depending on the size of the company. There will be different levels of accounting in the four categories. Firms will always have the possibility to choose a more advanced accounting regulation than the one they are obligated to due to their size. The purpose of this dissertation is to investigate which factors that influence the management in K3 firms in the choice between the K3 and K4 regulation.

The purpose of this study is to examine how primary school teachers work with the oral communicative ability of students who are quiet or unwilling to communicate freely in the classroom. This study aims to answer the question: which methods and strategies are most beneficial for the quiet students and how do teachers discover and assess these students?A qualitative method using semi-structured interviews will be used as the primary means of answering this question. The purpose of these interviews is to document the teachers? experiences working with quiet students.It appears that the teachers interviewed have or have had quiet students in their classes.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

Målet med detta examensarbete har varit att ta fram en applikation föratt publicera kyrkoåret. Appen ska fungera i telefon och pekplatta förandroid. Till det kommer en webbsida som fungerar för datorer ochmobila enheter som inte kör android. Man skall även kunna få framdatan som en PDF (Portable Document Format) fil, XML (ExtensibleMarkup Language) fil och en ICAL (kalender) fil. I denna uppgift ingåräven att ta fram en databasstruktur, objektorienterad design för arbetetsamt val av system och databas.

The purpose of this paper is to examine how teachers choose to work with the teaching of reading and writing skills, how teachers justify their choice of teaching method and how the documentation of student development is being used. This paper also discusses the definition of reading and writing, phonological awareness and how different reading- and writing educational methods can be combined. The gathering of information has been done through a literature review in which I have looked at past research on reading and writing. I have also conducted qualitative interviews with teachers involved in literacy learning. The result of my research shows that it is not possible to determine which literacy learning methods that are most effective.

The study aims to investigate student?s attitudes and experiences of information retrieval on the Internet, as tools for learning. I have been interested of their own views about their own knowledge and experience in the subject, information seeking on the Internet. The focus is on what they perceive as problematic, what skills they consider they have and what needs they have in terms of teaching. Data were collected via questionnaires.

This paper aims to examine the mother tongue subject and it´s existence and condition in a school located in the south of Stockholm. I have performed interviews with four teachers about their opinions and attitudes regarding the mother tongue subject in the school were they work. Two of the teachers are teachers in social studies and two of them are teachers in the mother tongue subject. My aim is also to examine whether an interest exists among the teachers to collaborate in between the subjects and what possibilities and conditions such collaboration would have in effect. I have applied a qualitative method based on personal interviews with semi-structured questions as my data acquisition method.

The main purpose of this essay was to study how the social service and the lawcourt have implemented the UN Convention on the Right of the Child, particularly incorporating the childs best interest in social services, child welfare investigations and the lawcourts judgement. We considered how the needs of the child, and the will and view of the child was documented. Also how the parents capacity and the environment factors, were documented in the social services investigations and the lawcourts judgement. The study was based both as a literature study and a document analysis. We analysed ten child welfare investigations from a social service office and their belonging lawcourt judgements.Our conclusion of the study is that the child is in focus both in the investigations and in judgement.

Denna rapport består av information och data som har samlats in i syfte att kunna presentera en genomförbar konvertering av linfärjan Toras framdrivningssystem, som idag utgörs av dieselelektrisk drift, till bränslecellsdrift. Den bränslecell som behandlas i rapporten är PEMFC och är en bränslecellstyp som drivs av ren vätgas. Resultaten tjänar som en informationskälla för en potentiell konvertering och presenteras för Trafikverket, som ett alternativ i linje med Sveriges regerings mål att reducera mängden CO2 utsläpp på en nationell nivå. Informationen i rapporten har insamlats via mail- och telefonkontakt samt ett besök på Tora på plats i Stockholm. Ett genomförande av konverteringen är fullt möjligt men mer kostsamt än dieseldrift i dagsläget med avseende på höga bränsle- och inköpskostnader utav bränsleceller.

Enligt Norstedts Svenska ordbok (2001:672) är lättja en obenägenhet hos människor att utföra arbete. Obenägenhet till arbete är när man som arbetstagare kan arbeta men inte vill. Lättja är ett relativt outforskat fenomen på arbetsmarknaden och ett svårt begrepp att definiera. Arbetstagare som ägnar sig åt lättja är något som vi insett förekommer i de flesta organisationer. Lättja hos arbetstagare kan ses som ett problem som vi tror att personalchefer kan ha svårt att hantera.

The aim of our study was to examine how Swedish journalists use the three social networks Facebook, Twitter and blogs to find news. We wanted to study which group of journalists that were using these networks most frequently and why. We also wanted to find out which of the three networks they use the most.We made a questionnaire which we sent out by e-mail to 400 Swedish journalists. 215 of them participated in our study.We analyzed the results of the responses from the questionnaire and discussed patterns and relations between them.The study establishes that the majority of the respondents believe that the networks are very useful and effective in their work.Our results show that out of the three social networks the journalists who participated in our study prefer to use blogs as sources in their line of work, as they are full of information from individuals and contain unique facts and stories.Alongside the results we discussed how social networks might be used in the future of journalism. Most of the respondents are aware of the possibility that they may need to increase the usage of them eventually, and that they will be an important part of the journalistic work process in the future. .

According to statistics, requirements management is identified as a major source of error to failed IT-projects. Moreover communication is identified as a factor affecting the require-ments management and can lead to deficiencies in the requirements. The requirements analyst is responsible for managing the requirements from the different stakeholders, act as a com-munication accommodator and to translate abstract requirements expressed by users to more specific requirements that developers can implement. The purpose of this thesis is to study the role of the requirements analyst to investigate the problems that may arise in working with requirements management.  To achieve the purpose we have performed a requirements management process in which we ourselves took the role as the requirements analysts. The requirements management process consisted of three phases: gather requirements, document requirements and validate require-ments.

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.