There are a great possibility to shorten the time between mowing and preservation by spreading of ley crops in connection to the conditioning. In this case the cellular respiration (the plants breeding that consume sugar until the crop is ensiled) should not continue as long and the forage will perhaps get a higher nutritional value. The capacity of the next machine could also be higher because the rake gives swaths with a lot of material. There is also a possibility that spreading of ley crops gives the material a more homogeneous content of dry matter and that gives a reduced growth of clostridium. This is particularly important when the method of harvest doesn?t include any mixing of the material like it does with a round baler or silagewagon.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

Background: Today, the tourism sector is one of the economically fastest growing sectors in the world. Volunteer travel is a type of service that is gaining in popularity and a number of tour operators organize these trips. Few aid agencies engaged in volunteer activities and therefore the interest in volunteer travel is caught by tour operators. These tourists travel in small groups and interact with locals. Today fifty million children in Africa are orphaned and Africans struggling with the care of these children by founding orphanages.Research questions:What does volunteers contribute with during their stay at orpahanges?What view does volunteers and orphanages have on volunteer tourism?Purpose: The purpose of this paper is to examine the positive and the negative effects that volunteer tourism contributes to orphanages.Method: The study is based on a qualitative approach with semi-and unstructured interviews, observations, and email interviews.

Bricoleur, digitala varelser och brus utgör tre viktiga noder, runt vilka mitt konstnärliga arbete rör sig. Parallellt med ett antal av mina verk beskrivs dessa begrepp kortfattat..

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

The purpose of this paper is to describe and analyse the Chinese destination of Hainan, with background in a globalizing tourism destination development, for tourism from Finland and Sweden. The questions at issue are regarding what kind of an impact the status as a special economic zone have had upon Hainan, what kind of conditions there are for tourism on the island, in what form participants of the tourism industry want the development to proceed, what the prevailing trend is for distant destinations for Nordic markets and also regarding what kind of potential there is for organized tourism to Hainan from Finland and Sweden.As a foundation for the paper, I?ve composed a theoretical reference for knowledge of China, Hainan and the study of destinations. The sources of secondary kind are literature related to the subject. The primary sources are mainly interviews, field work done at Hainan has given a concrete and personal knowledge of the place.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

In this essay I investigate how the Roman colonization (around 50 BC to 400 AD) affected the Celtic religion. I inquire which operators that were behind these changes and under what circumstances they happened. I take a closer look on three places in Gaul and one place and one area in Britain. In my study of these places I see that it was the elite of the Celtic societies who together and under pressure from Rome made these changes. The religion and gods did not change; instead the ritual ceremonies changed to fit into something that Rome thought was right.

The object with this thesis is to evaluate which of the catch crops oil radish and white mustard in combination with establishment method, give the most effective nitrogen uptake. The main purpose of the catch crops is to reduce leakage of nitrogen. They are sown after the main crop and killed before the next crop. In Sweden the farmers gets subsidies to establish catch crops. The thesis is limited to the trail L3-9010 sited at HS- Malmöhus, Borgeby Gård, 237 91 Bjärred, Sweden, 2007. Only treatments with oil radish, white mustard and the reference treatments were studied.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The common drivers for hotel accommodation are tourism and business travel and hotel demand seem to outstrip supply in many places. More than 50 % of visitors to Sweden stay at a traditional hotel but is there room for alternate accommodation like serviced apartments besides the traditional hotel for people visiting? These are usually referred to as extended stay or long-stay accommodation. The aim of this thesis project is to explore whether there are growth opportunities for serviced apartments in Sweden. A secondary aim of the thesis project is to identify challenges (if any) to this segment and also to identify the major operators of serviced apartments in Sweden.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This paper is concerned with surveying the possibilities of implementing a futures market based on the valuation of non-commercial real estate in Sweden. We base our survey on a theoretical speculation of how such a market would operate and what instrument would best suit the marketplace. After reaching our solution we survey key experts to receive their feedback on our suggested solution. Their feedback includes, who are potential operators on this market and their motives, possible effects of such a market on the real estate market and other aspects of society..