In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

The purpose of the thesis is to increase the knowledge of the deregulation of the mobile telecom market in Sweden, with focus on the time after the Electronic Communications Act (EkomL), by: (1) Describing the thought behind the Electronic Communications Act. (2) Assess how the National Post and Telecom Agency (PTS) has acted. (3) Assess how the operators have reacted. (4) Investigate the regulation?s effects upon competition.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

At Volvo Construction Equipment outside Eskilstuna a wide range of heavy equipment machines are developed that are used by a variety of industries worldwide. For the handling and maintenance of these machines a deep knowledge is often required. Volvo CE and their dealer Swecon offer courses for both drivers and technicians that last for 1-2 weeks. Out on the workplaces however, the knowledge from these courses need to be supplemented with information from the machine?s operator and repair manuals.

Transport is an important aspect to take account in efforts to achieve sustainable tourism development. If we do not change our behavior regarding travel, the consequences will be significant for the environment. This study examines the various transport operators on the two Swedish ski resorts if their websites and marketing are different from each other in the mode selection. The destinations are Åre and Hemavan Tärnaby. They studied modes are two Swedish airlines, two train companies, three bus companies and three taxi companies.These corporate websites are studied with a content analysis in which the results of the keywords that have been developed are scored according to different categories.

At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

The purpose of this study is to search and analyze different logics that operators use in the work of helping juvenile delinquents to break their criminal behavior. New institutional theory is used in this study to analyze the results. The study was conducted through qualitative interviews of six professionals in two municipalities which work with juvenile delinquency. There are two questions that we want to address in this study. The first one is what methods the social workers are using in two middle large municipalities to help youth to brake there criminal behavior.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.

This report is the result of a questionnaire survey done in cooperation with the company Sydved and their contractors. The investigation concerned all their ordinary contractors. The main goal with the study was to find out the contractors opinion about the current cooperation conditions with Sydved, their opinion about the future and how to improve the cooperation. All contractors got a questionnaire to fill in and return within a given date. The percentage of answers was 48 % at the first stage and further 11 % answered after reminder. The result of the investigation indicated that the contractors in general have a positive attitude to Sydved and the way that the company acts.

Environmental management systems are a way of systematizing and streamlining an organization's environmental efforts. Within its EMS the organization determines it´s environmental policy and various environmental objectives. In order to achieve their environmental objectives the organization produces action plans that describe how they will work towards the objectives. Stora Enso Skog AB´s districts have been assigned to produce action plans for the company´s environmental objective of 90 % approved everyday nature consideration in final felling and any targets included within this objective. The purpose of this study was to investigate how the districts work with these action plans and how this could be improved.

ThisreportisathesisfortheTechniciansinComputerAidedDesignprogramatHalmstadUniversity.Thegrouphasdevelopedamillingmachinemainlyusedforfiberboards,onbehalfofJohanWretborn..

The purpose of this paper is to examine the three main translation methods used in experimental Cross-language Information Retrieval CLIR research today, namely translation using either machine-readable dictionaries, machine translation systems or corpus-based methods. Working notes from research groups participating in the Text Retrieval Conference TREC and the Cross-Language Evaluation Forum CLEF between 1997 and 2000 have provided the main source material used to discuss the possible advantages and drawbacks that each method presents. It appears that all three approaches have their pros and cons, and because the different researchers tend to favour their own chosen method, it is not possible to establish a "winner approach" to CLIR translation by studying the working notes alone. One should remember however that the present interest in cross-language-applications of information retrieval has arisen as late as in the 1990s, and thus the research is yet in its early stages. The methods discussed in this paper may well be improved, or perhaps replaced by others in the future..